Vermeer welcomes you at BAUMA 2022

Vermeer will be attending BAUMA, the world’s largest construction machinery trade show and would like to welcome customers into our VIP area.

BAUMA will take place on Oct. 24 - 30 2022, at the Trade Fair Center Messe in Munich, Germany. More than 3.000 exhibitors from around 60 countries will be in attendance. The Vermeer booth will be located in the north open-air area, near the northwest entrance (booth number FN - 621/2). A map of the exhibition grounds, as well as tickets, can be found at

The Vermeer booth will have a variety of high-quality equipment on display. The following list is just a portion of the many machines we will be showcasing. For more information on equipment or Vermeer booth at BAUMA, contact your local dealer.

Vermeer R500 reclaimer

The R500 is the most compact reclaimer Vermeer offers and is available as a skid and trailer version. With a relatively low weight of 2.500 kilograms (5,511 lb) and a height-adjustable hitch, the R500 can be towed by a van or truck. The four heavy-duty pulldown jacks for stabilization will help for quick and convenient setup of the reclaimer.

Vermeer D40x55DR S3 horizontal directional drill

The Vermeer D40x55DR S3 Navigator® horizontal directional drill delivers excellent productivity in a broad range of ground conditions from hard, medium and soft rock to loamy dirt and clay. This rock drill features dual rod technology that uses an inner rod to provide torque to the drill bit, while the outer rod offers steering capability and rotational torque for reaming. The combination provides powerful downhole cutting action and the flexibility to select the appropriate tooling to best match the ground conditions, which can allow the entire install to be completed with one machine.

Vermeer MX300D mix system

This new diesel mixing system provides the fluid onsite to keep the drilling going smoothly. With one power unit to support two tanks, you have the option to run one tank or both, depending on the fluid needs of the job. The MX300D mixing system pairs well with a variety of drills and is ready to mix.

Vermeer D120E horizontal direction drill

The D120E HDD is entirely electric, allowing you to minimize maintenance, jobsite noise and environmental impact. The shipping container’s small footprint allows for mobility all across the world. It’s designed and built in Europe, with the same quality of components you expect from Vermeer.

Conmeq AS15 electric mini skid steer

Stylish design in a compact footprint, yet extremely powerful: the AS15 electric mini skid steer manufactured by Conmeq effortlessly carries 500 kilos. This electric mini-loader fits through a standard door and is suitable for use on storeys. The AS15 is convenient to control, turns its axis around effortlessly and stops automatically in the event of overload.

Vermeer S925TX mini skid steer

Following in the footsteps of its predecessor, the S925TX mini skid steer from Vermeer has the durability to work through tough jobsites. With impressive lift capacity and the comfort of a chariot-style operating station, this machine is designed for productivity and comfort. The standard dual auxiliary hydraulic system works in tandem with the universal mounting plate to provide maximum versatility on the jobsite.

Vermeer RTX1250i2 ride-on tractor

This ride-on tractor is made to help keep you productive while installing a variety of utilities, including gas, fiber, water and electric. Take advantage of the new interchangeable features offered on this machine with the option of quad tracks or tires and a variety of self-identifying intelligent attachments such as a trencher or vibratory plow. Use its other intelligent features to your benefit, like the TrenchSense™ electronic control system, Productivity Zone and other productivity features that can help you through rough terrain and difficult installs.

Vermeer PTX40 plow/trencher

The remote controlled, center-articulated PTX40 plow/trencher is designed for installing fiber optic, electrical, gas and irrigation services. Powered by a 46,8-horsepower (34,9-kW) Kubota liquid-cooled gasoline engine, the PTX40 provides maneuverability, maximum traction and power over its predecessor for plowing and trenching applications.

Vermeer SPX25 vibratory plow

The SPX25 is operated with a full-function remote control that provides optimal maneuverability in congested and tight jobsites. A 25-horsepower (18,6-kW) Kohler gas engine provides ample power for both plowing small pipes and cables at depths of 12 inches (30,5 cm) or less and boring underneath driveways and sidewalks.

Vermeer BC200 brush chipper with turn table

The BC200 brush chipper is engineered with exclusive features that promote user-friendly operation, high efficiency and operator safety. It combines a 42,5-kW (57-hp) Kubota petrol engine with a 20-cm x 30-cm infeed opening to provide superior feeding performance for dealing with heavily branched material. The BC200 is optional equipped with twin-axles and a turntable, allowing the chipper infeed to be rotated into seven positions for ease of feeding and convenience when working along the roadside.

About Vermeer Corporation

Vermeer delivers a real impact on the way important work gets done through the manufacture of high-quality agricultural, underground construction, surface mining, tree care and environmental equipment. With a reputation for being build tough and built in a better way, that equipment is backed by localized customer service and support provided by independent dealers around the world. To learn more about Vermeer, products, the dealer network and financing options, visit

Vermeer Corporation and Vermeer Manufacturing International Goes reserve the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional accessories or components specific to their global region.

Please contact your local Vermeer dealer for more information on machine specifications.

Recent News Articles

New Vermeer SC48TX stump cutter tackles tough jobs in tight spaces

Nov 16, 2023

The new Vermeer SC48TX stump cutter provides the ideal solution to access residential jobsites with a narrow footprint and low ground pressure, yet it can efficiently remove larger stumps.

Read More

Vermeer welcomes Shane Rourke as new managing director of Forage Solutions

Oct 24, 2023

Vermeer Corporation names Shane Rourke as the new managing director of Forage Solutions, the company’s business segment that produces Vermeer® agricultural equipment.

Read More

Vermeer QuickLock epoxy thread-locking compound for horizontal directional drills

Sep 19, 2023

The Vermeer QuickLock™ epoxy thread-locking compound for horizontal directional drills can help you replace a drill sub saver in as little as one hour.

Read More