This powerful and productive third-generation vac is ideal for production pothole applications and drill fluid management.

Find A Dealer Request More Info
The VX50 series is a powerful and productive vacuum excavator, equipped with a 4-in (10.2-cm) suction hose and 1,025-cfm (29-m³/min) blower. It is extremely useful for production pothole applications and drill fluid management. This third-generation vacuum excavator features a 49-hp (36.5-kW) Tier 4 Final Kubota diesel engine and is available with a 500-gal (1,893-L), 800-gal (3,028-L) or 1,200-gal (4,543-L) debris tank.

This powerful and productive third-generation vac is ideal for production pothole applications and drill fluid management.

The VX50 series is a powerful and productive vacuum excavator, equipped with a 4-in (10.2-cm) suction hose and 1,025-cfm (29-m³/min) blower. It is extremely useful for production pothole applications and drill fluid management. This third-generation vacuum excavator features a 49-hp (36.5-kW) Tier 4 Final Kubota diesel engine and is available with a 500-gal (1,893-L), 800-gal (3,028-L) or 1,200-gal (4,543-L) debris tank. Find A Dealer Request More Info

Features & Benefits

In-tank washdown

Delivers a high-pressure water spray to the tank interior, helping to simultaneously dump material and clean the inside of the tank. Minimizes cleanup time and helps remove difficult debris.

Three-stage cyclonic filtration

Engineered to help prolong filter and blower life, the system is suitable for wet and dry applications. The cyclones use a tuned vortex system in which the outer vortex spiral forces small particles to fall into a separate canister. The filtered stream then passes up through the inner cyclone tube and is carried to the final poly filter.

Cam-over rear door

Provides a 360-degree positive seal, even under reverse pressure without additional clamping requirements. The highly reliable cam-over door has no in-tank moving parts, so all maintenance is external.

Remote drains

Remote fluid drains and grease points are centrally-located near operator controls for ease of service.

Auto-belt tensioners

Keeps proper belt tensions at all times and helps extend belt life.

No hassle hose

Hang the suction hose on the side of the machine when moving between jobsites instead of coiling or disconnecting it, optimizing productivity.

Specifications

Compare Models
Show Metric
  • Trailer

    • Compatibility 500-gal (1892.7-L) spoil tank option
    • Length 203.5 in (516.9 cm)
    • Width 98.1 in (249.2 cm)
    • Height 85.9 in (218.2 cm)
    • Empty weight 6370 lbs (3025.5 kg)
    • Gross Vehicle Weight Rating (GVWR) 12000 lbs (5443.1 kg)
    • Trailer axles (2) 6000 lbs (2721 kg)
  • Trailer - Option two

  • Trailer - Option three

  • Trailer - Option four

  • Trailer - Option five

  • Engine

  • Water tank

  • Water tank - Option two

  • Water tank - Option three

  • Water tank - Option four

  • Water tank - Option five

  • Spoil Tank

  • Spoil tank - Option two

  • Spoil tank - Option three

  • Spoil tank - Option four

  • Spoil tank - Option five

  • Vacuum

  • Control panel

  • Boom

  • Options

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy and conditions of use. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Vermeer MV Solutions, Inc. reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Copyright © 2020 Vermeer Corporation. All Rights Reserved.