D10x15 S3 Navigator® Horizontal Directional Drill

Introducing a new direction in horizontal directional drilling (HDD). The D10x15 S3 offers even more power and performance than its predecessor, the D9x13 S3. It’s a reliable, economical solution for small service installation — built to help increase your crew’s productivity so you can go from one job to the next faster. With significant gains in horsepower and speed and a reduction in noise, the D10x15 S3 can help you put more product in the ground in a shorter amount of time.

Need skilled HDD operators? Get your employees trained by an industry leader. Learn more.

Features and benefits

  • An increase in carriage speed of almost 11% over its predecessor allows for faster cycle times and improved jobsite productivity.
  • Improved rotation performance helps boost productivity — an increase in spindle speed of up to 16% over its predecessor allows for a better mud slurry, enabling better mud flow while pulling in product in softer or reactive ground conditions.
  • A maximum ground drive speed (forward) of up to 3.3 mph (5.3 km/h) with optional wireless remote makes it faster than the closest competitor — helping make job setup times, jobsite entry and jobsite departure go more quickly.
  • A high rotational torque rating of 1500 ft-lb (2033.7 Nm) and 10,000 lb (44.5 kN) of thrust/pullback force provide the versatile power required for tough ground conditions and pulling reamers.
  • An almost 50% increase in tractive-effort-to-weight ratio over its predecessor enables improved tracking up and down ditches and enhanced maneuverability when fine-tuning setup and trailer positioning.
  • Reduced noise levels at operator’s ear makes a quieter working environment possible — creating less neighborhood disturbance and enabling easier communication among the crew.
  •  Small footprint — 4" (10.2 cm) narrower than its closest competitor — allows the drill to easily maneuver within narrow jobsites and position side by side with a mix system on a trailer. 
Length (Minimum Transport) 153 in 388.6 cm
Width (Minimum Transport) 44 in 111.8 cm
Height (Minimum Transport) 66 in 167.6 cm
Weight 7200 lbs 3265.9 kg
Angle of Approach 22 deg
Make and Model Deutz TD2.9
Fuel Type Ultra low sulfur diesel
Maximum Engine RPM 2300 rpm
Gross Horsepower 60 hp 44.7 kw
Aspiration Turbocharged
Max Fuel Consumption 3.5 gph 13.2 lph
Maximum Operating Angle (Fore/Aft)* 30
Maximum Operating Angle (Left/Right)* 30
Thrust 10000 lbs 44.5 kN
Pullback 10000 lbs 44.5 kN
Maximum Carriage Speed at Maximum Engine RPM 208 ft/min 63.4 m/min
Maximum Spindle Torque (High at Maximum Engine RPM) 1500 ft-lb 2033.7 Nm
Maximum Spindle Speed at Max Engine RPM 220 rpm
Minimum Bore Diameter 2.5 in 6.4 cm
Maximum Ground Drive Speed at Maximum Engine RPM 3.3 mph 5.3 km/h
Noise Level at Operator's Ear 86 dB(A)
Guaranteed sound power (CE-rating) 103 dB(A)
Fuel Tank 18 gal 68.1 L
Hydraulic System 25 gal 94.6 L
Maximum Flow 15 gpm 56.8 L/min
Maximum Pressure 1000 psi 68.9 bar
Brand FMC
On Board Tank Capacity 25 gal 94.6 L
Breakout System Standard hyd vise
Flow Indicator Standard
Stakedown System Standard or aggressive
Strike Alert Standard
Remote Lockout Standard
Drill Rod Thread 1.66 Firestick® drill rod #200
Thread Type Firestick (#200)
Length 6 ft 1.8 m
Rod Diameter 1.7" (4.3 cm)
Joint Inside Diameter .8 in 2 cm
Weight 26 lbs 11.8 kg
Minimum Bend Radius 95.5 ft 29.1 m

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. © 2018 Vermeer Corporation All Rights Reserved.

Videos

D10x15 S3 Navigator® Horizontal Directional Drill | Vermeer Underground Equipment

The D10x15 S3 Navigator® horizontal directional drill offers even more power and performance than its predecessor, the D9x13 S3. It’s a reliable, economical solution for small service installation — built to help increase your crew’s productivity so you can go from one job to the next faster. With significant gains in horsepower and speed and a reduction in noise, the D10x15 S3 can help you put more product in the ground in a shorter amount of time.

Images

D10x15 S3 Action 1

Recent news

July 21, 2016
New drill also features almost 11 percent increase in carriage speed, reduced sound levels

This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.