Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Thrust
    10000 lbs 44.5 kN
  • Drill Rod Thread
    1.66 Firestick® drill rod #200 1.66 Firestick® drill rod #200
  • Auxiliary Pump Flow at Maximum Engine RPM
    9 gpm 9 gpm
  • Fuel Tank
    18 gal 68.1 L
  • Breakout System
    Standard hyd vise Standard hyd vise
  • Make and Model
    Deutz TD2.9L4 Tier 4i/Stage IIIA Deutz TD2.9L4 Tier 4i/Stage IIIA
  • Maximum Flow
    15 gpm 56.8 L/min
  • Pullback
    10000 lbs 44.5 kN
  • Thread Type
    Firestick (#200) Firestick (#200)
  • Auxiliary Pump Relief Pressure
    3000 psi 206.8 bar
  • Fuel Type
    Ultra low sulfur diesel Ultra low sulfur diesel
  • Maximum Pressure
    1000 psi 68.9 bar
  • Maximum Carriage Speed at Maximum Engine RPM
    208 ft/min 63.4 m/min
  • Length
    6 ft 1.8 m
  • Thrust/Pullback Pump Flow at Max Engine RPM
    29 gpm 109.8 L/min
  • Hydraulic System
    25 gal 94.6 L
  • Flow Indicator
    Standard Standard
  • Maximum Engine RPM
    2300 rpm 2300 rpm
  • Brand
    FMC FMC
  • Rod Diameter
    1.7" (4.3 cm) 1.7" (4.3 cm)
  • Thrust/Pullback Pump Relief Pressure
    4350 psi 299.9 bar
  • Length (Minimum Transport)
    153 in 388.6 cm
  • Stakedown System
    Standard or aggressive Standard or aggressive
  • Gross Horsepower
    60 hp 44.7 kw
  • On Board Tank Capacity
    25 gal 94.6 L
  • Joint Inside Diameter
    .8 in 2 cm
  • Rotation Pump Flow at Maximum Engine RPM
    29 gpm 109.8 L/min
  • Width (Minimum Transport)
    44 in 111.8 cm
  • Aspiration
    Turbocharged Turbocharged
  • Weight
    26 lbs 11.8 kg
  • Rotation Pump Relief Pressure
    4350 psi 299.9 bar
  • Strike Alert
    Standard Standard
  • Max Fuel Consumption
    3.5 gph 13.2 lph
  • Maximum Spindle Torque (High at Maximum Engine RPM)
    1500 ft-lb 2033.7 Nm
  • Minimum Bend Radius
    95.5 ft 29.1 m
  • Hydraulic Supply Filter Rating
    5 micron 5 micron
  • Height (Minimum Transport)
    66 in 167.6 cm
  • Remote Lockout
    Standard Standard
  • Maximum Spindle Speed at Max Engine RPM
    220 rpm 220 rpm
  • Hydraulic Return Filter Rating
    5 micron 5 micron
  • Maximum Operating Angle (Fore/Aft)*
    30 30
  • Minimum Bore Diameter
    2.5 in 6.4 cm
  • Weight
    7200 lbs 3265.9 kg
  • Maximum Operating Angle (Left/Right)*
    30 30
  • Maximum Ground Drive Speed at Maximum Engine RPM
    3.3 mph 5.3 km/h
  • Noise Level at Operator's Ear
    86 dB(A) 86 dB(A)
  • Guaranteed sound power (CE-rating)
    103 dB(A) 103 dB(A)
  • Angle of Approach
    22 deg 22 deg
  • See Product