BC2100XL Tier 4 Final Brush Chipper

The Vermeer BC2100XL brush chipper is powered by a 275 hp (205 kW) Tier 4 Final diesel engine to tackle the toughest land clearing projects. With a 21-inch (53.3 cm) capacity and the largest infeed table in its class, the BC2100XL allows for smooth material feeding. Offset horizontal feed rollers have theoretical combined 10,000 lb (4536.9 kg) of pulling force and allow for easier feeding of material and less need for manual control of the upper feed roller when chipping large diameter material. The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.

Features and benefits

  • Improve productivity with the SmartFeed system, which monitors engine rpm and senses jams, automatically stopping or reversing the rollers as needed.
  • An optional winch eliminates the need to drag large material to the chipper with a winch line that can handle material up to 4000 lb (1814.9 kg).
  • Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drums, shaft and ring-feeder hubs.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Length - Feed Table Up, Tongue In 235 " 596.9 cm
Length - Table Down, Tongue Extended 259 " 657.9 cm
Width 95.8 " 243.2 cm
Height 116.5 " 295.9 cm
Weight - Engine Option One 16200 lbs 7348.2 kg
Tongue Weight - Engine Option One 2950 lbs 1338.1 kg
Weight With Winch (Additional) 1380 lbs 626 kg
Make and Model Cummins QSB 6.7 L Tier 4 Final
Number of Cylinders 6
Gross Horsepower (Maximum) 275 hp 205.1 kw
Torque (Max) 730 ft-lb 989.7 Nm
Fuel Tank Capacity 65 gal 246.1 L
Max Fuel Consumption 14 gph 53 lph
Fuel Type Ultra-low sulfur diesel
Air Cleaner DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
Oil Filter Spin-on
Recommended Oil API CJ-4
Oil Volume with Filter 17.6 qt 16.7 L
Maximum Angle of Continuous Operation 30 deg
Cooling Medium Liquid
Coolant Capacity (Engine and Radiator) 8.8 gal 33.3 L
Alternator 130 amp Delco-Remy 245I
Fan 26" (66 cm) suction
Clutch Drive Engagement Clutchless PTO
Feed Roller Orientation Horizontal
Number of Feed Rollers 2
Feed Roller Clamp Load 3500 lbs 1587.6 kg
Feed Roller Clamp Type Hydraulic
Feed Roller Minimum Distance to Drum 10 " 25.4 cm
Feed Roller Dimension 19 " (48.3 cm)
Weight of Feed Roller 972 lbs 440.9 kg
Motor Displacement 4.9 CID
Motor Manufacturer Eaton
Feed Speed 100 ft/min
Infeed Table Width 72 " 182.9 cm
Infeed Table Length 60.5 " 153.7 cm
Infeed Hopper Height 38.5 " 97.8 cm
Infeed Throat Capacity 40 x 24
Distance from Feed Table to Ground 30.8 " 78.2 cm
Infeed Table Material Thickness .4 " 1 cm
Bottom Feed Stop Bar Standard
Reset Method Green-hold-to-run button
Four Position Feed Control Bar Standard
Positions 4: E-stop, Forward, Neutral, and Reverse
Green Hold to Run Button Standard
Material Capacity 21 " 53.3 cm
Width .5 " 1.3 cm
Thickness 28 " 71.1 cm
Diameter 36 " 91.4 cm
Speed 1084 rpm
Weight With Shaft 1500 lbs 680.4 kg
Safety Lock - Number of Positions 4
Number of Knives 4
Knife Thickness .6 " 1.6 cm
Material A8 chipper steel
Useable Edges 2
Knife Size 5 " x 14 " (12.7 cm x 35.6 cm)
Number of Bolts/Knife 6
Replaceable Threaded Knife Block Yes
Number of Paddles 4
Fixture Method Weld-on
Air Flow 3600 cfm
Bedknife Size 3 " x 27.5 " (7.6 cm x 69.9 cm)
Bedknife - Number of Useable Edges 4
Number of Bearings 2
Bore 3.4 " 8.6 cm
Type Spherical roller
Manufacturer Dodge
Dynamic Capacity 65500 lbs 29710.3 kg
Belt Idler/Tensioner Torsion arm spring-loaded
Belt Type 5V chipper poly type
Chute Height 116 " 294.6 cm
Bottom Thickness .1 " .3 cm
Top Thickness .2 " .5 cm
Side Wall Thickness .1 " .3 cm
Deflector Thickness .1 " .2 cm
Chute Rotation Angle 270 deg
Rotation Type Hydraulic
Tank capacity 24 gal 90.8 L
Recommended Oil Type Vermeer Hy-Power 68
System Type Open center
Filtration Method 10 micron return, 100 mesh suction
Pump Flow at Maximum RPM 13 gpm 49.2 L/min
System relief pressure 2750 psi 189.6 bar
Auto Reverse PSI 2550 psi 175.8 bar
Directional Control Yes
Oil Cooler Yes
System Voltage 12 volts
Battery 2 - 950 CCA
Standard Gauges Tachometer, hour meter, coolant temperature, engine oil pressure, battery voltage, engine fault code, engine shutdown light and engine fault warning light
Switches Engine speed, SmartFeed droop (non-remote only), EcoIdle™ engine control system
Controller C148
Shutdown System Coolant temperature, intake manifold temperature, oil pressure
Radio Remote Control Engine speed, discharge chute, forward, stop, reverse feed, Smart Crush down pressure level, SmartFeed droop setting and engine stop.
Frame Description 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
Toolbox Description Lockable
Tongue Description 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm)
Tongue Extension Two position 12" extension (30.5 cm)
Hitch Type 3 " (7.6 cm) pintle
Fender Description Bolt-on
Axle/Suspension Tandem torsion 8000 lb (3628.7 kg) capacity
Type - Option One Tandem torsion
Manufacturer - Option One Dexter
Capacity - Option One 235/75R17.5 load range J
Tires - Option One 17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
Brake Type Electric
Trailer Light Type LED
Special Paint Optional
Extended Warranty Optional
Preventive Maintenance Optional
Adjustable Height Discharge Chute Optional
Remote Control Optional
Hydraulic Outriggers Optional
Hydraulic Chute Controls

Videos

Brush Chipper Operation and Safety Video

This video is for demonstration of selected portions of machine operations and safe operating practices and applies to Vermeer chippers equipped with the patented lower feed stop bar. Consult your operator’s manual for additional instructions and safety messages that apply to your machine.

Images

BC2100XL Tier 4 Final Engine Compartment