-
Equipment
-
- Parts and service
- Support
- News
- About us
- Careers
| Length | 110 " | 279.4 cm |
| Width | 49.8 " | 126.5 cm |
| Height | 52 " | 132.1 cm |
| Overall Width Transport (without duals) | 35 " | 88.9 cm |
| Overall Width Transport (with duals) | 49.8 " | 126.5 cm |
| Overall Height Transport | 52 " | 132.1 cm |
| Weight - Engine Option One | 1285 lbs | 582.9 kg |
| Sound Power | 105.4 |
| Make and Model | Kohler Command Pro EFI | |
| Number of Cylinders | 2 | |
| Gross Horsepower (Maximum) | 26.5 hp | 19.8 kw |
| Torque (Max) | 44.3 ft-lb | 60.1 Nm |
| Fuel Tank Capacity | 6 gal | 22.7 L |
| Max Fuel Consumption | 2.7 gph | 10.2 lph |
| Fuel Type | Gas | |
| Air Cleaner | Dry-type safety element and restriction indicator | |
| Oil Filter | Spin on | |
| Recommended Oil | 10W30 Kohler | |
| Oil Volume with Filter | 2 qt | 1.9 L |
| Cooling Medium | Air | |
| Alternator | 20 amp | |
| Clutch Type | Electric clutch with brake |
| Cutterwheel Diameter without Teeth | 17 " | 43.2 cm |
| Cutterwheel Thickness | .5 " | 1.3 cm |
| Cutterwheel Speed | 1400 rpm | |
| Cutterwheel Straight Line Dimension | 47 " | 119.4 cm |
| Cutterwheel Cut Above Ground | 24 " | 61 cm |
| Cutterwheel Cut Below Ground | 15 " | 38.1 cm |
| Tooth Description | Yellow Jacket cutter system | |
| Number of Teeth | 16 | |
| Number of Indexes | 2 | |
| Number of Pockets | 16 | |
| Reversible Pockets | 16 | |
| Cutterwheel Guard | Standard | |
| Chip Containment | 7.7 cu ft | .2 cu m |
| Belt Type | V-Belt | |
| Number of Primary Belts | 2 individual (matched pair) | |
| Jackshaft Dimension | 1.3 | |
| Jackshaft Bearing Type | Sealed ball | |
| Bearing Dimensions | 1.3 bore | |
| Number of Secondary Belts | 6 Banded | |
| Cutterwheel Shaft | 1.8" (4.8 cm) | |
| Bearing Dimensions - Secondary Belt | 1.8" (4.8 cm) double spherical roller pillow block |
| Tank capacity | 4 gal | 15.1 L |
| Recommended Oil Type | Vermeer HyPower 68 | |
| System Type | Open-loop series system | |
| Filtration Method | Pump suction strainer (100 mesh) and 6 micron return filter | |
| Pump Flow at Maximum RPM | 3.7 gpm | 14 L/min |
| System relief pressure | 2030 psi | 140 bar |
| Flow Control | AutoSweep (option) or 2 speed ground drive | |
| Directional Control | Manual hydraulic valve |
| System Voltage | 12 V | |
| Battery | 400 CCA | |
| Standard Gauges | Hourmeter | |
| Warning Lights | Oil pressure, engine fault, operator presence status, clutch engage/disengagement status | |
| Switches | Two-speed ground drive, clutch engage/disengage, operator presence handles | |
| Controller | Vermeer ACS | |
| Shutdown System | Oil pressure shutdown |
| Frame Description | Welded tube and plate steel | |
| Control Station Description | Fixed side locations | |
| Toolbox Description | Standard | |
| Hitch Type | Adapter for TLR25 trailer | |
| Steerable Axle Type | Manual single wheel or dual hydraulic steering axle | |
| Tires - Option One | 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard | |
| Fender Description | Yes | |
| Axle/Suspension | Rigid/Fixed |
| Low Speed Travel | 66 ft/min | 20.1 m/min |
| High Speed Travel | 133 ft/min | 40.5 m/min |
