As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need.

Find A Dealer Request More Info

As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need. The TG7000E tub grinder is powered by two electric motors providing a combined 1000 hp (746 kW) to the mill. With the option to configure either a soft-start or VFD starter panel – along with Vermeer features like the duplex drum design and continuous undermill discharge conveyor system – the TG7000E has the flexibility and features you need for productive processing.

As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need.

As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need. The TG7000E tub grinder is powered by two electric motors providing a combined 1000 hp (746 kW) to the mill. With the option to configure either a soft-start or VFD starter panel – along with Vermeer features like the duplex drum design and continuous undermill discharge conveyor system – the TG7000E has the flexibility and features you need for productive processing.

Find A Dealer Request More Info

Features & Benefits

Continuous undermill discharge conveyor system

Designed to handle more production with less clogging, the 36-in (91.4-cm) wide continuous undermill discharge conveyor system offers optimum speed and capacity.

Optional loader cab

An optional loader cab with grapple allows for a one-man operation, which can help reduce labor costs and increase efficiency.

Thrown object restraint system (TORS)

The patented TORS reduces the amount and distance of thrown objects, and has a smooth underside for better material flow.

Series II duplex drum system

The patented Series II duplex drum offers proven cutting performance, and reversible hammers and tips that can nearly double the wear life of single-sided designs and simplify daily maintenance.

Motor starter panel

The motor starter panel provides options to configure a control system that best fits your application – whether that’s a soft-start or VFD panel.

Two electric motors

The TG7000E is powered by two electric motors that deliver a combined 1000 hp (746 kW) to the mill. A separate 60-hp (44.7-kW) electric motor powers the pump for the hydraulic circuits, while a 2-hp (1.5-kW) electric motor powers the fan to cool the hydraulic system.

Specifications

Compare Models
  • General Dimensions and Weights - Non Loader

    • Maximum Length - Transport 48.5 ft 14.8 m
    • Maximum Length - Conveyor Unfolded 68.8 ft 21 m
    • Maximum Width (Transport) 11.9 ft 3.6 m
    • Maximum Height (Transport) 11.3 ft 3.4 m
    • Weight - Engine Option One 70800 lbs 32114.3 kg
    • Front Mount Pad Weight (Operation) 26300 lbs 11929.5 kg
    • Rear Mount Pad Weight (Operation) 44500 lbs 20184.9 kg
  • General Dimensions and Weights - Loader

    • Maximum Length - Transport 48.5 ft 14.8 m
    • Maximum Length - Conveyor Unfolded 68.8 ft 21 m
    • Maximum Reach of Loader 29.5 ft 9 m
    • Maximum Width (Transport) 11.9 ft 3.6 m
    • Maximum Height (Transport) 144 in 365.8 cm
    • Maximum Height - Cab in Operating Position 18.7 ft 5.7 m
    • Weight - Engine Option One 82150 lbs 37262.6 kg
    • Front Mount Pad Weight (Operation) 49450 lbs 22430.1 kg
    • Rear Mount Pad Weight (Operation) 50250 lbs 22793 kg
  • Mill Motor

    • Make and Model Weg W22
    • Gross Horsepower (Maximum) 1000 hp 745.7 kw
    • Torque (Max) 4412 ft-lb 5981.9 Nm
    • Cooling Medium Air
    • Torque Limiter PT Tech - Continuously engaged, friction type
  • Electric Fan Motor Option 1 - 460 V / 60 Hz

    • Manufacturer Weg W22
    • Frame NEMA 145T
    • Horsepower 2 hp 1.5 kw
    • Voltage 460
    • Frequency 60
    • Phase 3
    • Rated Speed 1750 rpm
    • Enclosure TEFC
    • Full Load Amps 2.61
    • Locked Rotor Amps 19.6
    • Service Factor 1.25
    • Duty Cycle S1
    • NEMA Design B
    • Insulation Class F
    • Full Load Torque 5.9 ft-lb 8 Nm
    • Locked Rotor (%) 240%
    • Break Down 300%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 86.5 (NEMA Premium Efficiency)
    • Power Factor 0.84
    • Approximate Weight 51 lbs 23.1 kg
    • Added Items Terminal Block, NEMA C-Face Mount
    • Drive Type Direct
  • Electric Hydraulic Motor Option 1 - 460 V / 60 Hz

    • Manufacturer Weg W22
    • Frame NEMA 364/5T
    • Horsepower 75 hp 55.9 kw
    • Voltage 460
    • Frequency 60
    • Phase 3
    • Rated Speed 1775 rpm
    • Enclosure TEFC
    • Full Load Amps 84.1
    • Locked Rotor Amps 538
    • Service Factor 1.25
    • Duty Cycle S1
    • NEMA Design B
    • Insulation Class F
    • Full Load Torque 219 ft-lb 296.9 Nm
    • Locked Rotor (%) 240%
    • Break Down 260%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 95.4 (NEMA Premium Efficiency)
    • Power Factor 0.86
    • Approximate Weight 919 lbs 416.9 kg
    • Added Items Terminal Block, NEMA C-Face Mount
    • Drive Type Direct
  • Loader Electric Hydraulic Motor Option 1 - 460 V / 60 Hz

    • Manufacturer Weg W22
    • Frame NEMA 404/5T
    • Horsepower 100 hp 74.6 kw
    • Voltage 460
    • Frequency 60
    • Phase 3
    • Rated Speed 1775 rpm
    • Enclosure TEFC
    • Full Load Amps 111
    • Locked Rotor Amps 810
    • Service Factor 1.25
    • Duty Cycle S1
    • NEMA Design B
    • Insulation Class F
    • Full Load Torque 292 ft-lb 395.9 Nm
    • Locked Rotor (%) 240%
    • Break Down 260%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 95.4 (NEMA Premium Efficiency)
    • Power Factor 0.88
    • Approximate Weight 1140 lbs 517.1 kg
    • Added Items Terminal Block, NEMA C-Face Mount
    • Drive Type Direct
  • Electric Mill Motor Option 1 - 460 V / 60 Hz (VFD)

    • Manufacturer Weg W22
    • Frame NEMA 586/7T
    • Horsepower 500 hp 372.8 kw
    • Voltage 460
    • Frequency 60
    • Phase 3
    • Rated Speed 1190 rpm
    • Enclosure TEFC
    • Full Load Amps 606
    • Locked Rotor Amps 3818
    • Service Factor 1
    • Duty Cycle S1
    • NEMA Design B
    • Insulation Class F
    • Full Load Torque 2206 ft-lb 2990.9 Nm
    • Locked Rotor (%) 220%
    • Break Down 210%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 95.8 (NEMA High Efficiency)
    • Power Factor 0.8
    • Approximate Weight 4403 lbs 1997.2 kg
    • Added Items Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing
    • Drive Type Direct
  • Electric Fan Motor Option 2 - 380 V / 50 Hz

    • Manufacturer Weg W22
    • Frame IEC 90L
    • Horsepower 2 hp 1.5 kw
    • Voltage 380
    • Frequency 50
    • Phase 3
    • Rated Speed 1445 rpm
    • Enclosure TEFC
    • Full Load Amps 3.21
    • Locked Rotor Amps 23.8
    • Service Factor 1
    • Duty Cycle S1
    • NEMA Design NM
    • Insulation Class F
    • Full Load Torque 7.3 ft-lb 9.9 Nm
    • Locked Rotor (%) 230%
    • Break Down 300%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 85.6
    • Power Factor 0.83
    • Approximate Weight 51 lbs 23.1 kg
    • Added Items Terminal Block, NEMA C Face Mount
    • Drive Type Direct
  • Electric Hydraulic Motor Option 2 - 380 V / 50 Hz

    • Manufacturer Weg W22
    • Frame IEC 250S/M
    • Horsepower 75 hp 55.9 kw
    • Voltage 380
    • Frequency 50
    • Phase 3
    • Rated Speed 1480 rpm
    • Enclosure TEFC
    • Full Load Amps 104
    • Locked Rotor Amps 778
    • Service Factor 1
    • Duty Cycle S1
    • NEMA Design N
    • Insulation Class F
    • Full Load Torque 262 ft-lb 355.2 Nm
    • Locked Rotor (%) 280%
    • Break Down 300%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 94.7
    • Power Factor 0.85
    • Approximate Weight 970 lbs 440 kg
    • Added Items Terminal Block, NEMA C Face Mount
    • Drive Type Direct
  • Loader Electric Hydraulic Motor Option 2 - 380 V / 50 Hz

    • Manufacturer Weg W22
    • Frame IEC 280S/M
    • Horsepower 100 hp 74.6 kw
    • Voltage 380
    • Frequency 50
    • Phase 3
    • Rated Speed 1485 rpm
    • Enclosure TEFC
    • Full Load Amps 141
    • Locked Rotor Amps 1060
    • Service Factor 1
    • Duty Cycle S1
    • NEMA Design N
    • Insulation Class F
    • Full Load Torque 356 ft-lb 482.7 Nm
    • Locked Rotor (%) 220%
    • Break Down 290%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 95.2 (IE3)
    • Power Factor 0.85
    • Approximate Weight 926 lbs 420 kg
    • Added Items Terminal Block, NEMA C Face Mount
    • Drive Type Direct
  • Electric Mill Motor Option 2 - 380 V / 50 Hz (Soft Start)

    • Manufacturer Weg W22
    • Frame IEC 355M/L
    • Horsepower 500 hp 372.8 kw
    • Voltage 380
    • Frequency 60
    • Phase 3
    • Rated Speed 1190 rpm
    • Enclosure TEFC
    • Full Load Amps 743
    • Locked Rotor Amps 4680
    • Service Factor 1.15
    • Duty Cycle S1
    • NEMA Design N
    • Insulation Class F
    • Full Load Torque 2191 ft-lb 2970.6 Nm
    • Locked Rotor (%) 220%
    • Break Down 230%
    • Ambient Temperature 40 c 1352 f
    • Nominal Efficiency 95.7 (IE2)
    • Power Factor 0.79
    • Approximate Weight 4386 lbs 1989.5 kg
    • Added Items Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing
    • Drive Type Direct
  • Electrical Panel (VFD)

    • Height 87.4 in 222 cm
    • Width 158 in 401.3 cm
    • Depth 24.1 in 61.2 cm
    • Weight 4300 lbs 1950.4 kg
  • Feed System

    • Tub Table Thickness .5 in 1.3 cm
    • Tub Table Type T1 Steel
    • Table Tilt Degrees 92 deg
    • Millbox Opening 27" x 69" (68.9 cm x 175.3 cm)
    • Inside Diameter of Tub 10 ft 3 m
    • Inside Flare Diameter - At Base of Tub 10.3 ft 3.1 m
    • Inside Flare Diameter - At Tub Opening 13 ft 4 m
    • Depth of Tub 4.7 ft 1.4 m
    • Tub Capacity 15 cu yd 11.5 cu m
    • Wall Type T1 Steel
    • Loading Height 11.4 ft 3.5 m
    • Drive Type Closed loop hydraulc, continuous sprocket
    • Drive Chain ANSI #160 roller chain
    • Drive Tensioner Hydraulic
    • Drive Motor Hydraulic, low speed/high torque (qty 2)
    • Tub Roller Quantity 8 carrier, 8 guide (16 total)
    • Tub Speed 7.2 rpm
    • Tub Agitators 4
  • Safety System

    • Thrown Object Restraint System Pivoting tub cover assembly
    • Tub Cover Description Conical cover wit hhydraulic swing-away
    • Tub Cover Positions Transport and operate with hydraulic lock
    • Rotor Deflector Standard
    • Wear Liner Thickness .5 in 1.3 cm
    • Wear Liner Type AR400
    • Falling Object Protection at Control Station Overhead and side protection
  • Duplex Drum

    • Drum Diameter 22.5 in 57.2 cm
    • Tip Diameter 31 in 78.7 cm
    • Drum Cutting Width 65.3 in 165.9 cm
    • Drum Skin Thickness 1.5 in 3.8 cm
    • Drum Speed 1190 rpm
    • Tip Speed 9960 rpm
    • Bearing Type Double row, spherical roller
    • Bearing - Inner Race Diameter 5.5 in 14 cm
    • Bearing - Dynamic Capacity 145000 lbs 65770.9 kg
    • Number of Hammers 10
    • Number of Cutters 20
    • Cutter Block Types 2 bolt retension with 7/8" (2.2 cm) UNC fasteners, 2.75" (7 cm) and 3.5" (8.9 cm) wide block options
    • Center Retention Pin Dimensions 2" (5.1 cm)
    • Number of Wipers 4
  • Screens

    • Screen Weight 500 lbs 226.8 kg
    • Screen Dimensions 72.4" x 35.8" x 10.3" (183.9 cm x 91 cm x 21.2 cm)
    • Screen Type AR400, reversible (qty 2)
    • Breaker Bar Type T1 steel, replaceable
    • Breaker Bar Dimensions 2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm)
    • Number of Sides 4 useable edges
    • Screen Area 4162 sq in 26851.6 sq cm
    • Distance - Screen to Millbox Wall 21.4 in 54.4 cm
  • Discharge System - Single Belt Design

    • Length 24 ft 7.3 m
    • Width 48 in 121.9 cm
    • Belt Design One piece, 330# with V-cleat
    • Splice Flexco R2 stainless steel
    • Return Roller Quantity 6 standard and 2 vibrating roller
    • Idler Roller Diameter 12 in 30.5 cm
    • Idler Roller Bearing 1- 15/16", 4 bolt flange
    • Standard Drive Roller Diameter 13.8 in 35.1 cm
    • Magnetic Drive Roller Diameter 13.8 in 35.1 cm
    • Drive Motor Geroler
    • Belt Speed 960 ft/min 292.6 m/min
    • Load Height 14.2 ft 4.3 m
  • Hydraulic System

    • Tank capacity 100 gal 378.5 L
    • Recommended Oil Hy-Power 68
    • Filtration Method In-tank return filters (qty 2)
    • Number of Coolers 1
  • Implement Hydraulics

    • Components Conveyor with auxiliary valve
    • System Type Load sense, pressure compensated
    • Pump Type Axial piston, variable displacement
    • Pump Flow at Maximum RPM 34.1 gpm 129.1 L/min
    • System relief pressure 3000 psi 206.8 bar
  • Tub Drive Hydraulics

    • System Type Closed loop
    • Pump Type Axial piston, variable displacement
    • Pump Flow at Maximum RPM 34.1 gpm 129.1 L/min
    • System relief pressure 3000 psi 206.8 bar
    • Motor Series Heavy-duty, high torque (qty 2)
  • Loader Hydraulics

    • System Type Load sense, pressure compensated
    • Pump Type Axial piston, variable displacement
    • Pump Flow at Maximum RPM 52.3 gpm 198 L/min
    • System relief pressure 3500 psi 241.3 bar
  • Electrical System

    • System Voltage 24 VDC
    • System Protection Fused
  • Control Station

    • Display Type LCD multifunction, analog hydraulic gauges
    • Machine Information Operational, diagnostic, and system parameters
    • Operational Faults SAE J1939 diagnostic codes
    • Gauges Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure
    • Switches Moisture proof, toggle switch
  • Radio Remote Control

    • Display Type LCD multifunction
    • Motor Information Yes
    • Machine Information Yes
    • Operational Faults Yes
    • Switches Sealed membrane
    • Operating Range 300' (91.4 m)
    • Battery Type AA (qty 6)
    • Channel Setting 50 channels
  • Loader Cab

    • Display Type LCD multifunction
    • Engine Information Yes
    • Motor Information Yes
    • Machine Information Yes
    • Operational Faults Yes
    • Gauges Loader hydraulic pressure
    • Switches Moisture proof, toggle style
  • Chassis

    • Frame Description Continuous I-beam
  • Loader

    • Loader Reach 29.5 ft 9 m
    • Pedestal/Cab Rotation 370 deg
    • Loader Lift Capacity at Full Reach 4000 lbs 1814.4 kg
    • Loader Lift Capacity at 10 ' (3.05 m) 12000 lbs 5443.1 kg
    • Grapple Type Multiple Tine, Continuous 360 Degree Rotation
    • Grapple Weight 1451 lbs 658.2 kg
    • Loader Controls Pilot operated
    • Climate Controls A/C and heat
    • Radio AM/FM, CD and 2.4" (6.1 cm) speakers
    • Window Type 3/8" (.95 cm) polycarbonate
    • Front Intrusion Guard 5/8" (1.6 cm) diameter reinforced wire mesh
  • Optional Air Compressor

    • Air Compressor Brand Mi-T-M
    • Engine 7.5 hp (5.6 kW)
    • Maximum Pressure 175 psi 12.1 bar
    • Maximum Air Flow 23.4 cfm .7 cmm
    • Tank capacity 30 gal 113.6 L
  • Other Options - Tub Grinder

    • Screens Optional
    • Special Tools Group Optional
    • Special Paint Optional
    • Extended Warranty Optional
    • Preventative Maintenance Optional

See it in action

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from your machine

Government solutions

Government solutions

Use Sourcewell to satisfy and simplify your bidding process.

Learn how
Purchase with confidence

Purchase with confidence

Vermeer Confidence Plus® asset protection program provides the ongoing service you need to assist in protecting the productivity and value of your equipment.

Learn more

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries Copyright © 2019 Vermeer Corporation. All Rights Reserved.