Ready to go to the field.

Find A Dealer Request More Info

The TM610 trailed mowers offer simplicity. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field. Toolless adjustments allow users to set the suspension between fields. The Quick-Clip® blade retention system lives up to its name. Horsepower requirements (TM610: 50 hp [37.3 kW]) are an average 20 percent lower than comparable 3-pt disc mowers. Plus, narrow transport widths help you mow and go. The trail to better mowing starts here.

Ready to go to the field.

The TM610 trailed mowers offer simplicity. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field. Toolless adjustments allow users to set the suspension between fields. The Quick-Clip® blade retention system lives up to its name. Horsepower requirements (TM610: 50 hp [37.3 kW]) are an average 20 percent lower than comparable 3-pt disc mowers. Plus, narrow transport widths help you mow and go. The trail to better mowing starts here.

Find A Dealer Request More Info

Features & Benefits

Easy hitch hookup

Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field.

Low horsepower requirements

Goes easy on horsepower, only requiring a 50 hp (37.3 kW) tractor for an 8.1 ft (2.5 m) cut.

Patented rubber torsion design

Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.

Hydraulic swing cylinder

Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.

Quick-Clip blade retention system

Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.

Specifications

Compare Models
  • Dimensions and Weights - Approximate

    • Transport Height 46 in 116.8 cm
    • Transport Width 8.3 ft 2.5 m
    • Transport Length 15.3 ft 4.7 m
    • Working Height 46 in 116.8 cm
    • Working Width 12.4 ft 3.8 m
    • Working Length 14.3 ft 4.4 m
    • Total Weight 2100 lbs 952.5 kg
    • Tongue Weight 600 lbs 272.2 kg
    • Tires 27 x 9.5 - 15
  • Tractor Requirements

    • Minimum Horsepower Required 50 hp 37.3 kw
    • Hydraulic requirements 2 auxiliary remotes (1 with optional kit)
    • Flow Rate 6 gpm 22.7 L/min
    • Hydraulic Pressure 1250 psi 86.2 bar
  • Cutterbar

    • Cutting Width 8.1 ft 2.5 m
    • Number of Discs 6
    • Disc Diameter 19.7 in 50 cm
    • Disc Speed 2797
    • Number of Knives 12
    • Cutterbar Angle 0-6º
    • Angle Adjustment Manual turnbuckle
    • Disc Type Quick-Clip® blade retention system
    • Skid Shoes Modular independent skid shoes
  • Standard Features

    • Warranty One year limited warranty and three year limited cutterbar warranty
    • Safety Equipment SMV sign
    • Mower Suspension Rubber torsion
    • Torque Protection - Driveline Friction disc clutch
  • Options

    • Single Tractor Outlet Hydraulic Kit For tractors with only 1 auxillary remote

See it in action

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Current Special Offers

The part that matters

The part that matters

Parts and service support doesn’t help tomorrow when you’re in the field today. Have your local dealer contact you for sophisticated and responsive support.
See the offer
0% financing up to 48 months or cash back on select models

0% financing up to 48 months or cash back on select models

Now, through October 31, 2020 qualified buyers can receive 0% interest for up to 48 months or cash back on the purchase of select new Vermeer forage equipment.
See the offer

More about Vermeer trailed mowers

10-series small trailed mowers get the job done

10-series small trailed mowers get the job done

Producers have always looked to a trailed mower as a way to better utilize horsepower in a machine that’s more convenient to hook up than a comparable 3-point mower.

Read more
The lowdown on mowing hay

The lowdown on mowing hay

When mowing forage for hay, numerous management decisions contribute to total yield, forage quality and stand longevity. This includes whether you’re harvesting grass hay or alfalfa hay, your preferred cutting height and when the first cutting takes place.

Read more
Why Tom Schwinn switched to the Vermeer TM1410 trailed mower

Why Tom Schwinn switched to the Vermeer TM1410 trailed mower

Before they switched, the Schwinn family was pulling three 10-ft mower conditioners with just as many tractors, and they had to hustle to mow 5 acres an hour with each machine. Now they’re mowing at 12 – 14 acres per hour with a single 20.8-ft trailed mower.

Read more

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries Copyright © 2018 Vermeer Corporation. All Rights Reserved.