Grind down the big jobs.

Find A Dealer Request More Info

Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.

Grind down the big jobs.

Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.

Find A Dealer Request More Info

Features & Benefits

Rear deck containment area

Collect chips as you work in the 68 cu ft (1.9 cu m) containment area under the rear deck.

Remote-controlled cutter operation

Keep your distance when you opt for the remote control, which operates the cutter up to 100’ (30 m) away from the unit.

Extended limited warranty

Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.

Specifications

Compare Models
  • General Dimensions and Weights

    • Length - Tongue In 167.3 in 424.9 cm
    • Length - Tongue Extended 234 in 594.4 cm
    • Length 167.3 in 424.9 cm
    • Width 79.8 in 202.7 cm
    • Height 79 in 200.7 cm
    • Weight - Engine Option One 4400 lbs 1995.8 kg
    • Weight - Engine Option Two 4040 lbs 1832.5 kg
    • Tongue Weight - Engine Option One 460 lbs 208.7 kg
    • Tongue Weight - Engine Option Two 380 lbs 172.4 kg
    • Sound Power 108.0 dB(a)
    • Sound Power - Engine Option Two 112.3 dB(a)
  • Engine Option One

    • Make and Model Deutz TD2.9L Tier 4 Final
    • Number of Cylinders 4
    • Gross Horsepower (Maximum) 74 hp 55.2 kw
    • Torque (Max) 188 ft-lb 254.9 Nm
    • Fuel Tank Capacity 25 gal 94.6 L
    • Max Fuel Consumption 4.6 gph 17.4 lph
    • Fuel Type Diesel
    • Air Cleaner Dry-type with precleaner, restriction indicator, evacuator valve and safety element
    • Oil Filter Spin-on
    • Recommended Oil 15W40 Deutz
    • Oil Volume with Filter 10.6 qt 10 L
    • Maximum Angle of Continuous Operation 30 deg
    • Cooling Medium Air-cooled head, oil-cooled block
    • Alternator 95 amp
    • Clutch Type Electric clutch with brake
  • Cutterwheel System

    • Cutterwheel Diameter without Teeth 28 in 71.1 cm
    • Cutterwheel Thickness .9 in 2.4 cm
    • Cutterwheel Speed 881 rpm
    • Cutterwheel Straight Line Dimension 96 in 243.8 cm
    • Cutterwheel Cut Above Ground 35 in 88.9 cm
    • Cutterwheel Cut Below Ground 25 in 63.5 cm
    • Tooth Description Yellow Jacket™ cutter system
    • Number of Teeth 42
    • Number of Indexes 2
    • Number of Pockets 42
    • Reversible Pockets Yes
    • Cutterwheel Guard Standard
    • Chip Containment 68 cu ft 1.9 cu m
  • Cutterwheel Drive Components

    • Upper Gearbox Straight bevel
    • Oil Type SAE 75W90 synthetic gear oil
    • Oil Capacity 1.7 qt 1.6 L
    • Lower Gearbox Straight bevel
    • Oil Type - Lower Gearbox SAE 75W90 synthetic gear oil
    • Oil Capacity - Lower Gearbox 2.2 qt 2.1 L
    • Driveshaft Rubber dampened with 2 universal joints
    • Driveshaft - U Joints Two standard with double lip seal
  • Hydraulic System

    • Tank capacity 6 gal 22.7 L
    • Recommended Oil Type Vermeer HyPower 68
    • System Type Gear pump, pressure balanced
    • Filtration Method 6 micron full flow return filter; suction strainer
    • Pump Flow at Maximum RPM 3.2 gpm 12.1 L/min
    • System relief pressure 2000 psi 137.9 bar
    • Flow Control Yes
    • Directional Control Yes
  • Electrical System

    • System Voltage 12 Volt
    • Battery 950
    • Standard Gauges MFD Multifunction LCD Display
    • Warning Lights Engine warning
    • Switches Ignition, throttle and clutch
    • Controller Operation with AutoSweep
    • Display Multifunction Display (MFD)
    • Shutdown System Low oil pressure, high engine coolant temp
    • Radio Remote Control None
  • Chassis

    • Frame Description Reinforced 4" (10.2 cm) square tubing
    • Control Station Description Swing-out
    • Operator Vision Shield Description Abrasion-resistant coated poly carbonate
    • Toolbox Description Standard
    • Tongue Description Extendable
    • Tongue Extension 60" (152.4 cm)
    • Hitch Type Pin, pintle, 2 1/6" (1.6 cm) ball
    • Tires - Option One Std. 8.75-16LT Tubeless bias-ply load range D
    • Fender Description Weld-on
    • Axle/Suspension Rubber torsional axle
    • Type - Option One Weld-on
    • Manufacturer - Option One Dexter
    • Capacity - Option One 6000
    • Tires - Standard 10x16.5LT Tubeless, bias ply, load ranged D
    • Wheels - Standard 16.5"x 8.3" (41.9 x 21 cm) mod style, 6 bolt circle
    • Brake Type Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
    • Trailer Light Type LED
  • Other Options

    • Special Paint Optional
    • Extended Warranty Optional
    • Preventive Maintenance Optional

See it in action

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Unmatched partnerships

Government solutions

Government solutions

Use Sourcewell to satisfy and simplify your bidding process.

Learn how
Stump cutter teeth

Stump cutter teeth

Built tough to withstand the daily grind.

Learn more

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries Copyright © 2015 Vermeer Corporation. All Rights Reserved.