Maximize your drilling muscle with the field-tested D1320x900 Navigator® horizontal directional drill.

Find A Dealer Request More Info

Maximize your drilling muscle with the field-tested D1320x900. Loaded with feature after feature to improve performance, reliability and durability, the D1320x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 102,500 ft-lb (138,971.6 Nm) of rotational torque and 1,360,000 lb (616,885.7 kN) of thrust/pullback.

Maximize your drilling muscle with the field-tested D1320x900 Navigator® horizontal directional drill.

Maximize your drilling muscle with the field-tested D1320x900. Loaded with feature after feature to improve performance, reliability and durability, the D1320x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 102,500 ft-lb (138,971.6 Nm) of rotational torque and 1,360,000 lb (616,885.7 kN) of thrust/pullback.

Find A Dealer Request More Info

Features & Benefits

High-torque, low-speed Hagglunds hydraulic motors

Operates efficiently with high-torque, low-speed Hagglunds hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.

Thrust box bearing-pack assembly

Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.

Floating vise

Helps prevent rod wrap or windup because its floating vise allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.

Higher torque

Muscles through difficult ground formations with higher torque than other models.

Specifications

Compare Models
  • Drill Rack

    • Length (Minimum Transport) 50.5 ft 15.4 m
    • Width 8.5 ft 2.6 m
    • Height (Minimum Transport) 11.5 ft 3.5 m
    • Weight 101000 lbs 45812.8 kg
    • Suspension Triple axle with air ride suspension
    • Front Base Anchor Length 20 ft 6.1 m
    • Front Base Anchor Width 6 ft 1.8 m
    • Front Base Anchor Height 24 in 61 cm
    • Front Flat Anchor Length 9.5 ft 2.9 m
    • Front Flat Anchor Width 5 ft 1.5 m
    • Front Flat Anchor Height 8 in 20.3 cm
    • Rear Base Anchor Length 16 ft 4.9 m
    • Rear Base Anchor Width 7.8 ft 2.4 m
    • Rear Base Anchor Height 8 in 20.3 cm
    • Number of Rear Legs 2
    • Drill Rack Angle 8 degrees to 12 degrees
  • Driller Cabin

    • Length 10 ft 3.1 m
    • Width 8.5 ft 2.6 m
    • Height 9 ft 2.7 m
    • Weight 6000 lbs 2721.6 kg
    • Heat and Air Conditioning In-wall combination unit
  • Power Pack

    • Length 22.4 ft 6.8 m
    • Width 8 ft 2.4 m
    • Height 10.3 ft 3.1 m
    • Weight 38000 lbs 17236.5 kg
    • Make and Model (1) CAT C-27
    • Fuel Type Diesel
    • Fuel Capacity 500 gal 1892.7 L
    • Hydraulic Tank Capacity 720 gal 2725.5 L
    • Maximum Engine RPM 2000 rpm
    • Gross Horsepower 800 hp 596.6 kw
    • EPA Certification Family Tier 2 (EU Stage II)
  • Power Pack Option Two

    • Length 32.2 ft 9.8 m
    • Width 8 ft 2.4 m
    • Height 10.3 ft 3.1 m
    • Weight 57260 lbs 25972.7 kg
    • Make and Model (2) CAT C-18
    • Fuel Type Diesel
    • Fuel Capacity 1000 gal 3785.4 L
    • Hydraulic Tank Capacity 720 gal 2725.5 L
    • Maximum Engine RPM 2000 rpm
    • Gross Horsepower 1200 hp 894.8 kw
    • EPA Certification Family Tier 3 (EU Stage II)
  • Power Pack Option Three

    • Length 32.2 ft 9.8 m
    • Width 8 ft 2.4 m
    • Height 10.3 ft 3.1 m
    • Weight 57260 lbs 25972.7 kg
    • Make and Model (2) CAT C-27
    • Fuel Type Diesel
    • Fuel Capacity 1000 gal 3785.4 L
    • Hydraulic Tank Capacity 720 gal 2725.5 L
    • Maximum Engine RPM 2000 rpm
    • Gross Horsepower 1600 hp 1193.1 kw
    • EPA Certification Family Tier 2 (EU Stage II)
  • Operational

    • Thrust 1360000 lbs 6049.6 kN
    • Pullback 1360000 lbs 6049.6 kN
    • Maximum Spindle Torque 102500 ft-lb 138971.6 Nm
    • Maximum Spindle Torque (Low at Maximum Engine RPM) 102500 ft-lb 138971.6 Nm
    • Maximum Spindle Speed at Maximum Engine RPM (with PS800) 36 rpm
    • Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600) 54 rpm
    • Maximum Carriage Speed at Maximum Engine RPM 64 ft/min 19.5 m/min
    • Number of Rotation Motors 1
    • Number of Drive Motors 6
    • Mud Swivel 3 in 7.6 cm
  • Lower Breakout Vise

    • Breakout Force 253000 ft-lb 343022.5 Nm
    • Configuration 3-jaw clamp, 8 " (20.3 cm)
    • Weight 3800 lbs 1723.7 kg
    • Travel 6 ft 1.8 m
    • Inside Diameter 9.8 in 24.9 cm
  • Upper Breakout Vise

    • Clamp Force 250000 ft-lb 338955 Nm
    • Configuration 2-jaw clamp
    • Inside Diameter 10 in 25.4 cm
  • Safety

    • Remote Lockout Yes
    • Strike Alert Yes

See it in action

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from your machine

24/7 HDD tooling purchasing

24/7 HDD tooling purchasing

BORESTORE® tooling warehouse is your complete source for HDD tooling and accessories.

Get tooling
Purchase with confidence

Purchase with confidence

Vermeer Confidence Plus® asset protection program provides the ongoing service you need to assist in protecting the productivity and value of your equipment.

Learn more

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries Copyright © 2016 Vermeer Corporation. All Rights Reserved.