- Weight
32000 lbs 14515 kg
- Hitch Weight
11600 lbs 5261.7 kg
- Transport Length
39 ft 11.9 m
- Transport Width
98.4 in 249.9 cm
- Transport Height
13.4 ft 4.1 m
- Operation Length
89.9 ft 27.4 m
- Operation Width
112.8 in 286.5 cm
- Operation Height
15 ft 4.6 m
- Capacity
100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40% 100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40%
- Make and Model
Siemens Siemens
- Motor rating
480 VAC, 3 Phase, 60 Hz, 60 hp (44.7 kW), 177 lb-ft (240 Nm) at 1800 rpm 480 VAC, 3 Phase, 60 Hz, 60 hp (44.7 kW), 177 lb-ft (240 Nm) at 1800 rpm
- System Voltage
12 V 12 V
- AC panel
75 hp, 480 VAC, soft start 75 hp, 480 VAC, soft start
- Tank capacity
55 gal 208.2 L
- Frame Description
Heavy-duty structural tubing Heavy-duty structural tubing
- Axle/Suspension
Single leaf sprung Single leaf sprung
- Capacity
20000 lbs 9071.8 kg
- Tires - Option One
445/50R22.5 445/50R22.5
- Hopper Capacity
5.5 cu yd 4.2 cu m
- Hopper Bottom Width
37 in 94 cm
- Hopper Height
9.5 ft (2.9 m) 9.5 ft (2.9 m)
- Hopper Opening
34-in tall x 37-in wide 34-in tall x 37-in wide
- Drum Operation
0-30.9 gpm (0-117 L/min) 0-30.9 gpm (0-117 L/min)
- Drum Diameter
5 ft 1.5 m
- Drum Support Description
Eight poly trunnion rollers 8-in (20.3-cm) diameter, 4-in (10.2-cm) wide Eight poly trunnion rollers 8-in (20.3-cm) diameter, 4-in (10.2-cm) wide
- Drum Length
15 ft 4.6 m
- Thrust Bearing Diameter
4 in 10.2 cm
- Thrust Bearing Face
2.9 in 7.4 cm
- Drum Speed
0-24 rpm 0-24 rpm
- Drum Drive Chain
140 custom extended pin 140 custom extended pin
- Drum Angle Adjustability
0-7 deg 0-7 deg
- Maximum Screen Panels
4 4
- Brush Diameter
14 in 35.6 cm
- Bristle Material
Polyethylene Polyethylene
- Brush Assembly Support
Two 1.25-in (2.3-cm) sealed ball bearings Two 1.25-in (2.3-cm) sealed ball bearings
- Conveyor Operation
17 gpm 64.4 L/min
- Conveyor Motor Displacement
33 cu-in 540.8 cu-cm
- Fines Conveyor Length
55 ft 16.8 m
- Fines Belt Speed
500 ft/min 152.4 m/min
- Conveyor Belt Width
36 in 91.4 cm
- Conveyor Belt Type
220-lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional 220-lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional
- Conveyor Belt Stacking Height
15 ft 15 ft
- Head Pulley Type
Rubber-lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width Rubber-lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width
- Head Pulley Bearing
2 7/16-in (6.2-cm) pillow block 2 7/16-in (6.2-cm) pillow block
- Troughing Idler Type
20-deg CEMA "B" with permanently seated bearings 20-deg CEMA "B" with permanently seated bearings
- Self-Cleaning Tail Pulley Dimensions
10-in (25.4-cm) diamater, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft 10-in (25.4-cm) diamater, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft
- Head Pulley Takeup
10 in 25.4 cm
- Self-Cleaning Return Idlers
4-in (10.2-cm) rubber disc, qty 8 4-in (10.2-cm) rubber disc, qty 8
- Fines Conveyor Frame
2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing
- Overs Conveyor Length
10.5 ft 3.2 m
- Maximum Variable Overs Belt Speed
250 ft/min 76.2 m/min
- Conveyor Belt Size
36 in 36 in
- Conveyor Belt Type
220 lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional 220 lb, 2-ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional
- Conveyor Belt Stacking Height
7 ft (2.1 m) 7 ft (2.1 m)
- Head Pulley Type
Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width
- Head Pulley Bearing
2 7/16-in (6.2-cm) pillow block 2 7/16-in (6.2-cm) pillow block
- Self-Cleaning Tail Pulley Dimensions
10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft 10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft
- Overs Conveyor Length
25 ft 7.6 m
- Maximum Variable Overs Belt Speed
250 ft/min 76.2 m/min
- Conveyor Belt Size
36 in 36 in
- Conveyor Belt Type
220 lb, 2 ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional 220 lb, 2 ply, 3/16 in x 1/16 in, R2 splice, continuous belt optional
- Conveyor Belt Stacking Height
13.75 ft (4.2 m) 13.75 ft (4.2 m)
- Head Pulley Type
Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width Rubber lagged, 12-in (30.5-cm) diameter, 38-in (96.5-cm) width
- Head Pulley Bearing
2 7/16-in (6.2-cm) pillow block 2 7/16-in (6.2-cm) pillow block
- Self-Cleaning Tail Pulley Dimensions
10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft 10-in (25.4-cm) diameter, 38-in (96.5-cm) width with 2 7/16-in (6.1-cm) shaft