Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Make and Model
    Deutz TD2.9L Tier 4 Final/ Stage IV Deutz TD2.9L Tier 4 Final/ Stage IV
  • Conveyor Operation
    17 gpm 64.4 L/min
  • Overs Conveyor Length
    10.5 ft 3.2 m
  • Brush Diameter
    14 in 35.6 cm
  • Drum Operation
    0-30.9 gpm (0-117.0 L/min) 0-30.9 gpm (0-117.0 L/min)
  • Hopper Capacity
    5.5 cu yd 4.2 cu m
  • Frame Description
    Heavy Duty Structural Tubing Heavy Duty Structural Tubing
  • Weight
    32000 lbs 14515 kg
  • Conveyor Motor Displacement
    33 cu-in 540.8 cu-cm
  • Maximum Variable Overs Belt Speed
    350 ft/min 106.7 m/min
  • Bristle Material
    Polyethylene Polyethylene
  • Hopper Bottom Width
    34 in 86.4 cm
  • Axle/Suspension
    Single Leaf Sprung Single Leaf Sprung
  • Tank capacity
    55 gal 208.2 L
  • Number of Cylinders
    4 4
  • Fines Conveyor Length
    55 ft 16.8 m
  • Conveyor Belt Size
    36 36
  • Brush Assembly Support
    Two 1.25" (3.2 cm) sealed ball bearings Two 1.25" (3.2 cm) sealed ball bearings
  • Drum Diameter
    5 ft 1.5 m
  • Capacity
    20000 lbs 9071.8 kg
  • Hitch Weight
    11600 lbs 5261.7 kg
  • Engine Rating
    74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm
  • Fines Belt Speed
    500 ft/min 152.4 m/min
  • Conveyor Belt Type
    220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option
  • Drum Support Description
    Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width
  • Tires - Option One
    445/50R22.5 445/50R22.5
  • Fuel Tank Capacity
    44 gal 166.6 L
  • Conveyor Belt Width
    36 in 91.4 cm
  • Conveyor Belt Stacking Height
    6' 6'
  • Transport Length
    39 ft 11.9 m
  • Fuel Consumption
    4.6 4.6
  • Conveyor Belt Type
    220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide   
  • Thrust Bearing Diameter
    4 in 10.2 cm
  • Hopper Height
    9.5 9.5
  • Transport Width
    98.4 in 249.9 cm
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg 30 deg
  • Conveyor Belt Stacking Height
    15' 15'
  • Head Pulley Bearing
    2 7/16" (6.2 cm) pillow block    2 7/16" (6.2 cm) pillow block   
  • Thrust Bearing Face
    2.9 in 7.4 cm
  • Hopper Opening
    34x37 34x37
  • Battery
    950 Cold Cranking Amp Group 31 950 Cold Cranking Amp Group 31
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (96.5 cm) wide    Rubber lagged, 12" (30.5 cm) diameter, 38" (96.5 cm) wide   
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft   
  • Drum Speed
    0-24 RPM 0-24 RPM
  • Transport Height
    13.4 ft 4.1 m
  • Oil Filter
    Spin-on Spin-on
  • Head Pulley Bearing
    2 7/16" (6.2 cm) pillow block    2 7/16" (6.2 cm) pillow block   
  • Drum Drive Chain
    140 custom extended pin 140 custom extended pin
  • Operation Length
    89.9 ft 27.4 m
  • Recommended Oil
    Mobil 15W40 Mobil 15W40
  • Drum Angle Adjustability
    0-7 degrees 0-7 degrees
  • Operation Width
    112.8 in 286.5 cm
  • Oil Volume with Filter
    8.4 qt 7.9 L
  • Troughing Idler Type
    20° CEMA "B" with permanently sealed bearings 20° CEMA "B" with permanently sealed bearings
  • Maximum Screen Panels
    4 4
  • System Voltage
    12 12
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft   
  • Operation Height
    15 ft 4.6 m
  • Air Cleaner
    Dual element Dual element
  • Head Pulley Takeup
    10 in 25.4 cm
  • Capacity
    100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40% 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40%
  • Radiator Fan
    Suction Suction
  • Self-Cleaning Return Idlers
    4" (10.2 cm) rubber disc, qty 8 4" (10.2 cm) rubber disc, qty 8
  • Fines Conveyor Frame
    2" (5.1 cm) x 8" (20.3 cm) structural steel tubing 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing