Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Length
    147 in 373.4 cm
  • Width
    35 in 88.9 cm
  • Height
    76.5 in 194.3 cm
  • Weight - Engine Option One
    4000 lbs 1814.4 kg
  • Width with Dual Wheel Option (Additional)
    56 in 142.2 cm
  • Chip Blade Dimension
    Standard - 34 inches wide, 13.75 inches tall Standard - 34 inches wide, 13.75 inches tall
  • Description
    Capacitive Handles - Swing/Raise & Lower Capacitive Handles - Swing/Raise & Lower
  • Make and Model
    Kohler KDI 1903 Kohler KDI 1903
  • Frame Description
    Welded tube and plate steel Welded tube and plate steel
  • System Voltage
    12 Volt 12 Volt
  • Radio Remote Control
    Optional Optional
  • Special Paint
    Optional Optional
  • Cutterwheel Diameter without Teeth
    23 in 58.4 cm
  • Tank capacity
    17 gal 64.4 L
  • Blade Travel Above Ground
    14 in 35.6 cm
  • Sensor Type
    Capacitive Handles Capacitive Handles
  • Number of Cylinders
    3 3
  • Control Station Description
    Swing out control station with three available positions plus auxiliary control station Swing out control station with three available positions plus auxiliary control station
  • Battery
    950 CCA 950 CCA
  • Remote Functions
    Engine stop, throttle, cutter wheel engage, swing, raise/lower, propel, creep, smartsweep Engine stop, throttle, cutter wheel engage, swing, raise/lower, propel, creep, smartsweep
  • Extended Warranty
    2 years/ 2000 hours or 3 years/3000 hours 2 years/ 2000 hours or 3 years/3000 hours
  • Cutterwheel Thickness
    1.1 in 2.9 cm
  • Recommended Oil Type
    Vermeer HyPower 68 Vermeer HyPower 68
  • Quantity/Location
    2 - Swing Out Station 2 - Swing Out Station
  • Gross Horsepower (Maximum)
    56 hp 41.8 kw
  • Operator Vision Shield Description
    Abrasion resistant coated polycarbonate, 3/16" thick Abrasion resistant coated polycarbonate, 3/16" thick
  • Remote Display
    LED LED
  • Preventive Maintenance
    Optional Optional
  • Cutterwheel Speed
    1124 rpm 1124 rpm
  • System Type
    2 closed loops and 1 open 2 closed loops and 1 open
  • Bumper
    .75" (1.9 cm) plate .75" (1.9 cm) plate
  • Visual Interface
    Indicator Light/Display Indicator Light/Display
  • Torque (Max)
    165 ft-lb 223.7 Nm
  • Toolbox Description
    Standard Standard
  • Deluxe Gauges
    DP05 Display - Fuel,Hour Meter, Selectible DP05 Display - Fuel,Hour Meter, Selectible
  • Remote Range
    300' 300'
  • Cutterwheel Straight Line Dimension
    72 in 182.9 cm
  • Lower Gearbox
    90 degree 90 degree
  • Filtration Method
    Suction strainers, one charge pump filter and one 3 micron return filter Suction strainers, one charge pump filter and one 3 micron return filter
  • Fuel Tank Capacity
    14.5 gal 54.9 L
  • Warning Lights
    Low oil pressure, high engine temperature, alternator/charging, wait to start glow plug indicator, high and low hydraulic temp, ACS controller function lights- various functions shown on controller Low oil pressure, high engine temperature, alternator/charging, wait to start glow plug indicator, high and low hydraulic temp, ACS controller function lights- various functions shown on controller
  • Cutterwheel Cut Above Ground
    31 in 78.7 cm
  • Oil Type - Lower Gearbox
    Syn 75W90 Syn 75W90
  • Max Fuel Consumption
    2.4 gph 9.2 lph
  • Switches
    Two-speed ground drive, blade, steering, differential propel lock, SmartSweep settings, cutterwheel engage/disengage, creep, propel system joystick and boom controls joystick Two-speed ground drive, blade, steering, differential propel lock, SmartSweep settings, cutterwheel engage/disengage, creep, propel system joystick and boom controls joystick
  • Cutterwheel Cut Below Ground
    25 in 63.5 cm
  • Oil Capacity - Lower Gearbox
    1.6 qt 1.5 L
  • Fuel Type
    Diesel Diesel
  • Controller
    Vermeer ACS Vermeer ACS
  • Tooth Description
    Yellow Jacket Cutting System Yellow Jacket Cutting System
  • Driveshaft
    Standard Standard
  • Air Cleaner
    Dry type safety element and restriction indicator Dry type safety element and restriction indicator
  • Steerable Axle Type
    Two wheels, hydraulic Two wheels, hydraulic
  • Number of Teeth
    26 26
  • Driveshaft - U Joints
    2 standard with double lip seals 2 standard with double lip seals
  • Directional Control
    Electric over hydraulic Electric over hydraulic
  • Oil Filter
    Cartridge Style Cartridge Style
  • Degree of Oscillation
    15 deg 15 deg
  • Shutdown System
    High coolant temperature, low oil pressure and high hydraulic oil temperature High coolant temperature, low oil pressure and high hydraulic oil temperature
  • Number of Indexes
    2 per tooth 2 per tooth
  • Oil Cooler
    Standard Standard
  • Recommended Oil
    SAE 10W30 Low SAPS - ACEA E6-E9 SAE 10W30 Low SAPS - ACEA E6-E9
  • Turning Radius
    105 deg 105 deg
  • Radio Remote Control
    Functions include: propel forward/reverse; boom up/down, boom left/right, steering left/right, blade up/down, SmartSweep settings, travel speed high/low, differential lock, throttle Functions include: propel forward/reverse; boom up/down, boom left/right, steering left/right, blade up/down, SmartSweep settings, travel speed high/low, differential lock, throttle
  • Number of Pockets
    26 26
  • Oil Volume with Filter
    9.4 qt 8.9 L
  • Reversible Pockets
    Yes- standard Yes- standard
  • Maximum Angle of Continuous Operation
    30 deg 30 deg
  • Cutterwheel Guard
    Standard Standard
  • Cooling Medium
    Liquid Liquid
  • Chip Containment
    28.2 cu ft .8 cu m
  • Coolant Capacity (Engine and Radiator)
    1.7 gal 6.2 L
  • Axle/Suspension
    Steerable axle type Steerable axle type
  • Alternator
    100 amp 100 amp
  • Fan
    Suction Suction
  • Clutch Type
    Hydrostatic Transmission Hydrostatic Transmission
  • Tires - Standard
    Rear:Duals, 23x8.5-14 Rear:Duals, 23x8.5-14
  • Wheels - Standard
    Rear: 14" x 6" (35.56 cm x 15.24 cm) Rear: 14" x 6" (35.56 cm x 15.24 cm)
  • Brake Type
    Spring applied, hydraulic release at planetary drives and hydrostatic braking (closed loop) Spring applied, hydraulic release at planetary drives and hydrostatic braking (closed loop)