Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Length
    118 in 299.7 cm
  • Width
    50.1 in 127.3 cm
  • Height
    53 in 134.6 cm
  • Overall Width Transport (without duals)
    35.5 in 90.2 cm
  • Weight - Engine Option One
    1950 lbs 884.5 kg
  • Weight With Chip Blade Option (Additional)
    85 lbs 38.6 kg
  • Low Speed Travel
    65 ft/min 19.8 m/min
  • Chip Blade Dimension
    Optional - 33" (83.8 cm) wide, 12" (30.5 cm) tall Optional - 33" (83.8 cm) wide, 12" (30.5 cm) tall
  • Make and Model
    Briggs & Stratton Vanguard EFI Briggs & Stratton Vanguard EFI
  • System Voltage
    12 V 12 V
  • Tank capacity
    6.5 gal 24.6 L
  • Cutterwheel Diameter without Teeth
    17 in 43.2 cm
  • Frame Description
    Welded tube and plate steel Welded tube and plate steel
  • Blade Travel Above Ground
    8 in 20.3 cm
  • Number of Cylinders
    2 2
  • Battery
    400 CCA 400 CCA
  • Recommended Oil Type
    Vermeer HyPower 68 Vermeer HyPower 68
  • Cutterwheel Thickness
    .5 in 1.3 cm
  • Control Station Description
    Fixed side location Fixed side location
  • High Speed Travel
    130 ft/min 39.6 m/min
  • Blade Travel Below Ground
    2.5 in 6.4 cm
  • Gross Horsepower (Maximum)
    37 hp 27.6 kw
  • System Type
    Open-loop series system Open-loop series system
  • Cutterwheel Speed
    1560 rpm 1560 rpm
  • Torque (Max)
    49 ft-lb 66.4 Nm
  • Filtration Method
    10 micron fill strainer and 6 micron return filter 10 micron fill strainer and 6 micron return filter
  • Cutterwheel Straight Line Dimension
    47 in 119.4 cm
  • Toolbox Description
    Standard Standard
  • Fuel Tank Capacity
    10 gal 37.9 L
  • Warning Lights
    Oil pressure, engine fault, operator presence status, clutch engage/disengage status Oil pressure, engine fault, operator presence status, clutch engage/disengage status
  • Pump Flow at Maximum RPM
    6.4 gpm 24.2 L/min
  • Cutterwheel Cut Above Ground
    24 in 61 cm
  • Max Fuel Consumption
    3.2 gph 12.1 lph
  • Switches
    Two-speed 2x4 and 4x4 ground drive, cutter wheel engage/disengage, creep, blade (if applicable) Two-speed 2x4 and 4x4 ground drive, cutter wheel engage/disengage, creep, blade (if applicable)
  • System relief pressure
    2470 psi 170.3 bar
  • Cutterwheel Cut Below Ground
    15 in 38.1 cm
  • Fuel Type
    Gas Gas
  • Controller
    Danfoss Danfoss
  • Flow Control
    SmartSweep SmartSweep
  • Tooth Description
    Yellow Jacket cutter system Yellow Jacket cutter system
  • Air Cleaner
    Dry-type safety element and restriction indicator Dry-type safety element and restriction indicator
  • Directional Control
    Electric over hydraulic Electric over hydraulic
  • Number of Teeth
    20 20
  • Steerable Axle Type
    Hydraulic steering, oscillating axle Hydraulic steering, oscillating axle
  • Oil Filter
    Spin-on Spin-on
  • Belt Type
    V-belt V-belt
  • Shutdown System
    Engine low oil pressure Engine low oil pressure
  • Number of Indexes
    2 2
  • Degree of Oscillation
    12 deg 12 deg
  • Recommended Oil
    10W30 (See engine manual) 10W30 (See engine manual)
  • Number of Primary Belts
    2 individual (matched pair) 2 individual (matched pair)
  • Number of Pockets
    20 20
  • Oil Volume with Filter
    2.5 qt 2.4 L
  • Jackshaft Dimension
    1.3 1.3
  • Reversible Pockets
    20 20
  • Tires - Option One
    5.7"x 8" (14.5 x 20.3 cm) dual standard 5.7"x 8" (14.5 x 20.3 cm) dual standard
  • Maximum Angle of Continuous Operation
    25 deg 25 deg
  • Jackshaft Bearing Type
    Sealed ball Sealed ball
  • Cutterwheel Guard
    Standard Standard
  • Cooling Medium
    Air Air
  • Bearing Dimensions
    1.3 bore 1.3 bore
  • Chip Containment
    7.5 cu ft .2 cu m
  • Fender Description
    Yes Yes
  • Axle/Suspension
    Rigid/fixed (rear) Rigid/fixed (rear)
  • Alternator
    20/50 amp (rpm-based) 20/50 amp (rpm-based)
  • Number of Secondary Belts
    6 banded 6 banded
  • Cutterwheel Shaft
    1.8" (4.8 cm) 1.8" (4.8 cm)
  • Clutch Type
    Electric clutch with brake Electric clutch with brake
  • Bearing Dimensions - Secondary Belt
    1.8" (4.8 cm) double spherical roller pillow block 1.8" (4.8 cm) double spherical roller pillow block
  • Brake Type
    Spring-applied, hydraulic release at rear motors Spring-applied, hydraulic release at rear motors