Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Length - Feed Table Up, Tongue In
    150 in 381 cm
  • Length - Table Down, Tongue Extended
    198 in 502.9 cm
  • Width
    66.5 in 168.9 cm
  • Height
    101 in 256.5 cm
  • Weight - Engine Option One
    4995 lbs 2265.7 kg
  • Weight - Engine Option Two
    4995 lbs 2265.7 kg
  • Tongue Weight - Engine Option One
    600 lbs 272.2 kg
  • Tongue Weight - Engine Option Two
    600 lbs 272.2 kg
  • Number of Bearings
    2 2
  • Material Capacity
    12 in 30.5 cm
  • Bottom Feed Stop Bar
    Standard Standard
  • Make and Model
    Deutz D2.9L Tier 4 Final Deutz D2.9L Tier 4 Final
  • Make and Model
    Deutz TD2.9L Tier 4 Final Deutz TD2.9L Tier 4 Final
  • Frame Description
    7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
  • Chute Height
    101 in 256.5 cm
  • Tank capacity
    7 gal 26.5 L
  • System Voltage
    12 Volt 12 Volt
  • Special Paint
    Optional Optional
  • Feed Roller Orientation
    Horizontal Horizontal
  • Bore
    2.4 in 6.1 cm
  • Width
    20 in 50.8 cm
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Number of Cylinders
    4 4
  • Number of Cylinders
    4 4
  • Recommended Oil Type
    Vermeer VMF Vermeer VMF
  • Battery
    Group 31; 950 CCA Group 31; 950 CCA
  • Extended Warranty
    Optional Optional
  • Number of Feed Rollers
    1 1
  • Type
    Spherical rollers Spherical rollers
  • Thickness
    .4 in 1 cm
  • Bottom Feed Stop Bar Material Thickness
    11 GA 11 GA
  • Gross Horsepower (Maximum)
    74 hp 55.2 kw
  • Gross Horsepower (Maximum)
    49 hp 36.5 kw
  • Tongue Description
    2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm)
  • System Type
    Tandem center Tandem center
  • Standard Gauges
    MFD, hour MFD, hour
  • Preventive Maintenance
    Optional Optional
  • Feed Roller Clamp Load
    350 lbs 158.8 kg
  • Manufacturer
    Linkbelt Linkbelt
  • Diameter
    20 in 50.8 cm
  • Actuation Force (BFSB)
    34 lbs 15.4 kg
  • Torque (Max)
    181 ft-lb 245.4 Nm
  • Torque (Max)
    108 ft-lb 146.4 Nm
  • Tongue Extension
    Extendable 24" (61 cm) @ 12" (30.5 cm) increments Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • Filtration Method
    10 micron return; 100 micron suction 10 micron return; 100 micron suction
  • Dynamic Capacity
    31400 lbs 14242.8 kg
  • Speed
    2050 rpm 2050 rpm
  • Normal Sensitivity
    22 deg 22 deg
  • Fuel Tank Capacity
    25 gal 94.6 L
  • Fuel Tank Capacity
    25 gal 94.6 L
  • Hitch Type
    Pintle Pintle
  • Pump Flow at Maximum RPM
    2.7 gpm 10.2 L/min
  • Switches
    Feed Stop Bar Sensitivity, Droop, Ecoldle Feed Stop Bar Sensitivity, Droop, Ecoldle
  • Feed Roller Minimum Distance to Drum
    1 in 2.5 cm
  • Static Capacity
    53500 lbs 24267.2 kg
  • Weight With Shaft
    460 lbs 208.7 kg
  • Reduced Sensitivity
    12 deg 12 deg
  • Max Fuel Consumption
    4.6 gph 17.4 lph
  • Max Fuel Consumption
    3 gph 11.4 lph
  • Fender Description
    Bolt-on-steel Bolt-on-steel
  • Chute Rotation Angle
    270 deg 270 deg
  • System relief pressure
    2500 psi 172.4 bar
  • Controller
    Vermeer ACS Vermeer ACS
  • Feed Roller Dimension
    20" x 17" (50.8 cm x 43.2 cm) 20" x 17" (50.8 cm x 43.2 cm)
  • Belt Idler/Tensioner
    Yes Yes
  • Safety Lock - Number of Positions
    2 2
  • Reset Method
    Green hold-to-run button Green hold-to-run button
  • Fuel Type
    Diesel Diesel
  • Fuel Type
    Diesel Diesel
  • Axle/Suspension
    Torsion Torsion
  • Rotation Type
    Rotation handle with pin lock Rotation handle with pin lock
  • Display
    Multifunctional display (MFD) Multifunctional display (MFD)
  • Number of Knives
    2 2
  • Belt Type
    5V 5V
  • Number of Knives
    2 2
  • Four Position Feed Control Bar
    Standard Standard
  • Air Cleaner
    2-stage dry with safety element 2-stage dry with safety element
  • Air Cleaner
    2-stage dry with safety element 2-stage dry with safety element
  • Type - Option One
    Rubber torsional Rubber torsional
  • Rotational Lock
    Yes Yes
  • Flow Control
    No No
  • Shutdown System
    Yes Yes
  • Weight of Feed Roller
    400 lbs 181.4 kg
  • Knife Thickness
    .6 in 1.6 cm
  • Oil Filter
    Spin-on Spin-on
  • Oil Filter
    Spin-on Spin-on
  • Manufacturer - Option One
    Dexter Dexter
  • Directional Control
    Yes Yes
  • Radio Remote Control
    No No
  • Material
    A8 chipper steel A8 chipper steel
  • Recommended Oil
    10W30 10W30
  • Recommended Oil
    10W30 10W30
  • Capacity - Option One
    5200 lb (2358.7 kg) 5200 lb (2358.7 kg)
  • Oil Cooler
    No No
  • Useable Edges
    2 2
  • Positions
    4: E-stop, forward, neutral and reverse 4: E-stop, forward, neutral and reverse
  • Oil Volume with Filter
    8.4 qt 7.9 L
  • Oil Volume with Filter
    8.4 qt 7.9 L
  • Tires - Option One
    ST235/80/R16 Load Range E ST235/80/R16 Load Range E
  • Knife Size
    0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm)
  • Actuation Force
    34 lbs 15.4 kg
  • Maximum Angle of Continuous Operation
    30 deg 30 deg
  • Maximum Angle of Continuous Operation
    30 deg 30 deg
  • Wheels - Option One
    16" (40.6 cm) 16" (40.6 cm)
  • Number of Feed Roller Motors
    1 1
  • Number of Bolts/Knife
    4 4
  • Green Hold to Run Button
    Standard Standard
  • Cooling Medium
    Liquid Liquid
  • Coolant Capacity (Engine and Radiator)
    2.9 gal 11 L
  • Axle/Suspension - Option Two
    Torsion Torsion
  • Motor Displacement
    28.3 28.3
  • Replaceable Threaded Knife Block
    Yes Yes
  • Coolant Capacity (Engine and Radiator)
    13.3 gal 50.3 L
  • Cooling Medium
    Liquid Liquid
  • Type - Option Two
    Rubber torsional Rubber torsional
  • Motor Manufacturer
    White White
  • Number of Paddles
    5 5
  • Alternator
    95 Amp 95 Amp
  • Alternator
    95 Amp 95 Amp
  • Manufacturer - Option Two
    Dexter Dexter
  • Feed Speed
    105 ft/min 105 ft/min
  • Fixture Method
    Weld-on Weld-on
  • Fan
    18.625" (47.3 cm) suction 18.625" (47.3 cm) suction
  • Fan
    15" (38.1 cm) suction 15" (38.1 cm) suction
  • Capacity - Option Two
    7000 lb (3175.2 kg) 7000 lb (3175.2 kg)
  • Infeed Table Width
    52 in 132.1 cm
  • Clutch Type
    Clutchless PTO Clutchless PTO
  • Clutch Type
    Clutchless PTO Clutchless PTO
  • Tires - Option Two
    ST235/80R16 Load Range E ST235/80R16 Load Range E
  • Infeed Table Length
    32 in 81.3 cm
  • Bedknife Size
    3.5" x 17.3" (8.9 cm x 43.8 cm) 3.5" x 17.3" (8.9 cm x 43.8 cm)
  • Clutch Drive Engagement
    Belt tensioner Belt tensioner
  • Clutch Drive Engagement
    Belt tensioner Belt tensioner
  • Wheels - Option Two
    16" x 6" (40.6 cm x 15.2 cm) 16" x 6" (40.6 cm x 15.2 cm)
  • Infeed Hopper Height
    12 in 30.5 cm
  • Bedknife Thickness
    1 in 2.5 cm
  • Infeed Throat Capacity
    12" H x17" W (30.5 cm H x 43.2 cm W) 12" H x17" W (30.5 cm H x 43.2 cm W)
  • Bedknife Material
    1018 1018
  • Pinch Point - Distance to End of Feed Table
    66.5 in 168.9 cm
  • Bedknife - Number of Useable Edges
    4 4
  • Distance from Feed Table to Ground
    26 in 66 cm
  • Infeed Table Material Thickness
    .2 in .5 cm
  • Brake Type
    Standard electric or optional hydraulic Standard electric or optional hydraulic
  • Trailer Light Type
    LED LED
  • See Product