Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Length - Feed Table Up, Tongue In
    150 in 381 cm
  • Length - Table Down, Tongue Extended
    198 in 502.9 cm
  • Width
    66.5 in 168.9 cm
  • Height
    101 in 256.5 cm
  • Weight - Engine Option One
    4680 lbs 2122.8 kg
  • Tongue Weight - Engine Option One
    520 lbs 235.9 kg
  • Sound Power
    119 dB 119 dB
  • Make and Model
    PSI 3.0L EFI PSI 3.0L EFI
  • Bottom Feed Stop Bar
    Standard Standard
  • Material Capacity
    12 in 30.5 cm
  • Number of Bearings
    2 2
  • System Voltage
    12 volt 12 volt
  • Frame Description
    7" (17.8 cm) Z channel; .25" (0.6 cm) thickness 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness
  • Special Paint
    Optional Optional
  • Feed Roller Orientation
    Horizontal Horizontal
  • Chute Height
    101 in 256.5 cm
  • Tank capacity
    7 gal 26.5 L
  • Number of Cylinders
    4 4
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Bore
    2.4 in 6.1 cm
  • Battery
    Group 24; 580 CCA Group 24; 580 CCA
  • Extended Warranty
    Optional Optional
  • Number of Feed Rollers
    1 1
  • Recommended Oil Type
    Vermeer VMF Vermeer VMF
  • Gross Horsepower (Maximum)
    89 hp 66.4 kw
  • Bottom Feed Stop Bar Material Thickness
    11 GA 11 GA
  • Thickness
    20 in 50.8 cm
  • Type
    Spherical rollers Spherical rollers
  • Standard Gauges
    Fuel and MFD Fuel and MFD
  • Tongue Description
    2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm)
  • Preventive Maintenance
    Optional Optional
  • Feed Roller Clamp Load
    350 lbs 158.8 kg
  • System Type
    Open center Open center
  • Torque (Max)
    142 ft-lb 192.5 Nm
  • Actuation Force (BFSB)
    34 lbs 15.4 kg
  • Diameter
    20 in 50.8 cm
  • Manufacturer
    Linkbelt Linkbelt
  • Deluxe Gauges
    Standard Standard
  • Tongue Extension
    Extendable 24" (61 cm) at 12" (30.5 cm) increments Extendable 24" (61 cm) at 12" (30.5 cm) increments
  • Filtration Method
    10 micron return; 100 micron suction 10 micron return; 100 micron suction
  • Fuel Tank Capacity
    20 gal 75.7 L
  • Normal Sensitivity
    22 deg 22 deg
  • Speed
    2220 rpm 2220 rpm
  • Dynamic Capacity
    31400 lbs 14242.8 kg
  • Switches
    Droop, EcoIdle, and Sensitivity Droop, EcoIdle, and Sensitivity
  • Hitch Type
    Pintle Pintle
  • Feed Roller Minimum Distance to Drum
    1 in 2.5 cm
  • Pump Flow at Maximum RPM
    3 gpm 11.4 L/min
  • Max Fuel Consumption
    7.8 gph 29.5 lph
  • Reduced Sensitivity
    12 deg 12 deg
  • Weight With Shaft
    460 lbs 208.7 kg
  • Static Capacity
    53500 lbs 24267.2 kg
  • Controller
    Vermeer ACS Vermeer ACS
  • Fender Description
    Bolt-on steel Bolt-on steel
  • Feed Roller Dimension
    20 " x 17 " (50.8 cm x 43.2 cm) 20 " x 17 " (50.8 cm x 43.2 cm)
  • Chute Rotation Angle
    270 deg 270 deg
  • System relief pressure
    2500 psi 172.4 bar
  • Fuel Type
    Unleaded and E10 gasoline Unleaded and E10 gasoline
  • Reset Method
    Green hold-to-run button Green hold-to-run button
  • Safety Lock - Number of Positions
    2 2
  • Belt Idler/Tensioner
    Yes Yes
  • Display
    In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road. In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road.
  • Axle/Suspension
    Torsion Torsion
  • Number of Knives
    2 2
  • Rotation Type
    Manual rotate with pin lock Manual rotate with pin lock
  • Air Cleaner
    2-stage dry with safety element 2-stage dry with safety element
  • Four Position Feed Control Bar
    Standard Standard
  • Number of Knives
    2 2
  • Belt Type
    5V 5V
  • Shutdown System
    High temp, low pressure High temp, low pressure
  • Type - Option One
    Rubber torsional Rubber torsional
  • Weight of Feed Roller
    400 lbs 181.4 kg
  • Rotational Lock
    Yes Yes
  • Flow Control
    No No
  • Oil Filter
    Spin-on Spin-on
  • Knife Thickness
    .6 in 1.6 cm
  • Radio Remote Control
    No No
  • Manufacturer - Option One
    Dexter Dexter
  • Directional Control
    Yes Yes
  • Recommended Oil
    SAE 10W30 SAE 10W30
  • Material
    A8 chipper steel A8 chipper steel
  • Capacity - Option One
    5200 lb (2358.7 kg) 5200 lb (2358.7 kg)
  • Oil Cooler
    No No
  • Oil Volume with Filter
    4.5 qt 4.3 L
  • Positions
    4: E-stop, forward, neutral, and reverse 4: E-stop, forward, neutral, and reverse
  • Useable Edges
    2 2
  • Tires - Option One
    ST235/80/R16 Load Range E ST235/80/R16 Load Range E
  • Maximum Angle of Continuous Operation
    20 deg 20 deg
  • Actuation Force
    34 lbs 15.4 kg
  • Knife Size
    0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm)
  • Wheels - Option One
    16 " x 6 " (40.6 cm x 15.2 cm) 16 " x 6 " (40.6 cm x 15.2 cm)
  • Number of Feed Roller Motors
    1 1
  • Cooling Medium
    Liquid Liquid
  • Green Hold to Run Button
    Standard Standard
  • Number of Bolts/Knife
    4 4
  • Axle/Suspension - Option Two
    Torsion Torsion
  • Motor Displacement
    28.3 28.3
  • Coolant Capacity (Engine and Radiator)
    3.6 gal 13.6 L
  • Replaceable Threaded Knife Block
    Yes Yes
  • Type - Option Two
    Rubber torsional Rubber torsional
  • Motor Manufacturer
    White White
  • Alternator
    70 70
  • Number of Paddles
    5 5
  • Manufacturer - Option Two
    Dexter Dexter
  • Feed Speed
    118 ft/min 118 ft/min
  • Fan
    16.5" (41.9 cm) pusher 16.5" (41.9 cm) pusher
  • Fixture Method
    Weld-on Weld-on
  • Capacity - Option Two
    7000 lb (3175.2 kg) 7000 lb (3175.2 kg)
  • Infeed Table Width
    52 in 132.1 cm
  • Clutch Type
    Clutchless PTO Clutchless PTO
  • Air Flow
    580 cfm 580 cfm
  • Tires - Option Two
    ST235/80R16 Load Range E ST235/80R16 Load Range E
  • Infeed Table Length
    32 in 81.3 cm
  • Clutch Drive Engagement
    Belt tensioner Belt tensioner
  • Bedknife Size
    3.5 " x 17.3 " (8.9 cm x 43.8 cm) 3.5 " x 17.3 " (8.9 cm x 43.8 cm)
  • Wheels - Option Two
    16 " x 6 " (40.6 cm x 15.2 cm) 16 " x 6 " (40.6 cm x 15.2 cm)
  • Infeed Hopper Height
    12 in 30.5 cm
  • Bedknife Thickness
    1 in 2.5 cm
  • Infeed Throat Capacity
    12 " x 17.5 " (30.5 cm x 43.2 cm) 12 " x 17.5 " (30.5 cm x 43.2 cm)
  • Bedknife Material
    1018 1018
  • Pinch Point - Distance to End of Feed Table
    66.5 in 168.9 cm
  • Bedknife - Number of Useable Edges
    4 4
  • Distance from Feed Table to Ground
    26 in 66 cm
  • Infeed Table Material Thickness
    .2 in .5 cm
  • Brake Type
    Standard electric or optional hydraulic Standard electric or optional hydraulic
  • Trailer Light Type
    LED LED