Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Width
    79 in 200.7 cm
  • Height
    108 in 274.3 cm
  • Weight (without winch and hydraulic jack)
    11000 lbs 4989.5 kg
  • Weight (with winch, hydraulic jack and hydraulic chute)
    11400 lbs 5171 kg
  • Weight with outriggers (additional)
    170 lbs 77.1 kg
  • Make and Model
    John Deere 4045HFC09 John Deere 4045HFC09
  • Number of Cylinders
    4 4
  • Gross Horsepower (Maximum)
    173 hp 129 kw
  • Torque (Max)
    492 ft-lb 667.1 Nm
  • Fuel Tank Capacity
    40 gal 151.4 L
  • Max Fuel Consumption
    6.8 gph 25.7 lph
  • Fuel Type
    Diesel Diesel
  • Air Cleaner
    2 Stage Dry 2 Stage Dry
  • Oil Filter
    Spin-on Spin-on
  • Recommended Oil
    ACEA E-7 & E-6 or API CI-4 ACEA E-7 & E-6 or API CI-4
  • Oil Volume with Filter
    15.5 qt 14.7 L
  • Maximum Angle of Continuous Operation
    30 deg 30 deg
  • Cooling Medium
    Liquid Liquid
  • Coolant Capacity (Engine and Radiator)
    32 gal 121.1 L
  • Alternator
    90 90
  • Fan
    26" Suction 26" Suction
  • Clutch Type
    12" Spring Loaded 12" Spring Loaded
  • Clutch Drive Engagement
    Manual Lever Manual Lever
  • Feed Roller Orientation
    Horizontal Horizontal
  • Number of Feed Rollers
    2 2
  • Feed Roller Clamp Load
    4000 lbs 1814.4 kg
  • Feed Roller Clamp Type
    Hydraulic Hydraulic
  • Feed Roller Minimum Distance to Drum
    5 in 12.7 cm
  • Feed Roller Dimension
    19" dia x 28.25 length 19" dia x 28.25 length
  • Number of Knives
    12 12
  • Weight of Feed Roller
    350 lbs 158.8 kg
  • Feed Roller Dimension (Two)
    11" dia x 28.25 length 11" dia x 28.25 length
  • Number of Knives (2)
    10 10
  • Weight of Feed Roller (Option Two)
    186 lbs 84.4 kg
  • Number of Feed Roller Motors
    4 4
  • Motor Displacement
    28.4 28.4
  • Motor Manufacturer
    White RE470 White RE470
  • Feed Speed
    119 ft/min 119 ft/min
  • Infeed Table Width
    71 in 180.3 cm
  • Infeed Table Length
    60.5 in 153.7 cm
  • Infeed Hopper Height
    35 in 88.9 cm
  • Infeed Throat Capacity
    28.875" wide x 24" tall 28.875" wide x 24" tall
  • Distance from Feed Table to Ground
    30.3 in 77 cm
  • Infeed Table Material Thickness
    .3 in .6 cm
  • Bottom Feed Stop Bar
    Standard Standard
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Bottom Feed Stop Bar Material Thickness
    11 GA 11 GA
  • Actuation Force (BFSB)
    34 lbs 15.4 kg
  • Normal Sensitivity
    22 deg 22 deg
  • Reduced Sensitivity
    12 deg 12 deg
  • Reset Method
    Green Hold to Run Button Green Hold to Run Button
  • Four Position Feed Control Bar
    Standard Standard
  • Diameter
    1.5 in 3.8 cm
  • Material Thickness
    11 in 27.9 cm
  • Positions
    4: E-Stop, Forward, Neutral, Reverse 4: E-Stop, Forward, Neutral, Reverse
  • Actuation Force
    34 lbs 15.4 kg
  • Green Hold to Run Button
    Standard Standard
  • Material Capacity
    19 in 48.3 cm
  • Width
    .5 in 1.3 cm
  • Thickness
    26.1 in 66.3 cm
  • Diameter
    36 in 91.4 cm
  • Speed
    1100 1100
  • Weight With Shaft
    1160 lbs 526.2 kg
  • Safety Lock - Number of Positions
    4 4
  • Number of Knives
    4 4
  • Knife Thickness
    .6 in 1.6 cm
  • Material
    A8 Modified Chipper Steel A8 Modified Chipper Steel
  • Useable Edges
    2 2
  • Knife Size
    0.625 x 5 x 10 0.625 x 5 x 10
  • Number of Bolts/Knife
    5 5
  • Replaceable Threaded Knife Block
    Yes Yes
  • Number of Paddles
    12 12
  • Fixture Method
    Weld-on Weld-on
  • Bedknife Size
    3" x 20.25" 3" x 20.25"
  • Bedknife Thickness
    1.3 in 3.2 cm
  • Bedknife Material
    1018 CD 1018 CD
  • Bedknife - Number of Useable Edges
    4 4
  • Number of Bearings
    2 2
  • Bore
    2.5 in 6.4 cm
  • Type
    Spherical Roller Spherical Roller
  • Manufacturer
    Linkbelt Linkbelt
  • Dynamic Capacity
    31400 lbs 14242.8 kg
  • Static Capacity
    53500 lbs 24267.2 kg
  • Belt Idler/Tensioner
    Spring loaded Spring loaded
  • Belt Type
    5V 5V
  • Chute Height
    108 in 274.3 cm
  • Bottom Thickness
    .1 in .2 cm
  • Top Thickness
    .2 in .5 cm
  • Side Wall Thickness
    .1 in .3 cm
  • Deflector Thickness
    .1 in .2 cm
  • Chute Rotation Angle
    270 deg 270 deg
  • Rotation Type
    Worm gear with rotational lock Worm gear with rotational lock
  • Rotational Lock
    Self lock Self lock
  • Tank capacity
    20 gal 75.7 L
  • Recommended Oil Type
    HY POWER 68 HY POWER 68
  • System Type
    Open Center Open Center
  • Filtration Method
    6 micron return, 100 micron suction 6 micron return, 100 micron suction
  • Pump Flow at Maximum RPM
    14.8 gpm 56 L/min
  • System relief pressure
    3000 psi 206.8 bar
  • Auto Reverse PSI
    2800 psi 193.1 bar
  • Flow Control
    No No
  • Directional Control
    Yes Yes
  • Oil Cooler
    No No
  • System Voltage
    12 12
  • Battery
    950 CCA 950 CCA
  • Standard Gauges
    Digital Display with tachometer, hourmeter, oil pressure, water temp, battery voltage and engine error codes. Fuel and DEF gauges Digital Display with tachometer, hourmeter, oil pressure, water temp, battery voltage and engine error codes. Fuel and DEF gauges
  • Switches
    Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity, Chute controls, Manual Crush Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity, Chute controls, Manual Crush
  • Controller
    Vermeer ACS: C248 Vermeer ACS: C248
  • Display
    MFD MFD
  • Shutdown System
    High temp, low pressure, Tier 4 emissions related High temp, low pressure, Tier 4 emissions related
  • Radio Remote Control
    Optional Optional
  • Frame Description
    7.5" Z-Channel x 0.25" Thick 7.5" Z-Channel x 0.25" Thick
  • Toolbox Description
    Standard Standard
  • Tongue Description
    5" x 3" x 0.375" 5" x 3" x 0.375"
  • Tongue Extension
    Extendable 12" Extendable 12"
  • Hitch Type
    Pintle Pintle
  • Fender Description
    Bolt-on Bolt-on
  • Axle/Suspension
    Tandem Torsion 7000 lb capacity Tandem Torsion 7000 lb capacity
  • Type - Option One
    TandemTorsion TandemTorsion
  • Manufacturer - Option One
    Dexter Dexter
  • Capacity - Option One
    14,000 (Tandem 7,000 lbs) 14,000 (Tandem 7,000 lbs)
  • Tires - Option One
    LT285/75R16 Load Range E LT285/75R16 Load Range E
  • Wheels - Option One
    16" 16"
  • Brake Type
    Electric Electric
  • Trailer Light Type
    LED LED
  • Winch Relief System
    2300 psi 158.6 bar
  • Winch Boom Structure
    0.25 GR50 detachable 0.25 GR50 detachable
  • Winch Input Speed
    87 rpm 87 rpm
  • Winch Controls
    Forward, Reverse, Free Spool Forward, Reverse, Free Spool
  • Winch Rope
    9/16" 9/16"
  • Rope Length
    150 ft 45.7 m
  • Rope Line Pull
    3250 lbs 1474.2 kg
  • Special Paint
    Optional Optional
  • Extended Warranty
    Optional Optional
  • Preventive Maintenance
    Optional Optional
  • Adjustable Height Discharge Chute
    Optional Optional
  • Remote Control
    (Basic or optional Deluxe) (Basic or optional Deluxe)
  • Hydraulic Outriggers
    Optional (Manual only) Optional (Manual only)
  • Hydraulic Chute Controls
    Standard Standard