Get pro silage baling performance with the 504 Pro baler.

Find A Dealer Request More Info

It’s built to handle the demands of heavy, wet material and produce high-quality bales in a variety of materials. For operators who want pro performance for frequent silage baling, the 504 Pro baler sets the standard.

Get pro silage baling performance with the 504 Pro baler.

It’s built to handle the demands of heavy, wet material and produce high-quality bales in a variety of materials. For operators who want pro performance for frequent silage baling, the 504 Pro baler sets the standard.

Find A Dealer Request More Info

Features & Benefits

Heavy-duty drive components

Heavy-duty drive components, from chains to bearings, to effectively and consistently handle heavy, dense silage bales.


Hydroflexcontrol allows the baler floor to flex up and down to minimize blockage in the pickup. Or, the operator can hydraulically open the floor from the cab to clear plugs and move material back into the chamber.

Xtracut17 chopper system

Xtracut17 chopper system cuts the crop for better bale density, fermentation, silage quality and digestibility. The pre-cut crop also provides a consistent material for additions to rations fed using a mixer wagon.

E-Link Pro monitor

The E-Link Pro monitor offers the ability to electronically adjust density control from the cab, collect and store comprehensive field and operation statistics, and more.

Powersplit transmission

Patented powersplit transmission provides a split gearbox design that controls belts and rollers separately from the rotor and pickup, to make better use of horsepower when baling heavy material.


Compare Models
  • Bale Size

    • Bale Diameter 60 in 152.4 cm
    • Bale Width 48 in 121.9 cm
    • Bale Weight 2400 lbs 1088.6 kg
  • Dimensions and Weights

    • Length (With Ramp) 196.1 in 498.1 cm
    • Height 115 in 292.1 cm
    • Width - Standard 96 in 243.8 cm
    • Weight (Fully Optioned) 8680 lbs 3937.2 kg
    • Drawbar Weight 1520 lbs 689.5 kg
  • Bale Forming Chamber

    • Type of Chamber Variable
    • Number of Rollers 15
    • Idler Roller Size 9.6 in 24.4 cm
    • Width of Belt 11.2 in 28.4 cm
    • Number of Belts 4
    • Type of Lace Endless Belts
    • Length of Belt - Long 433.1 in 1100.1 cm
  • Drive System

    • Driveline 80 Degree CV, 540 RPM
    • Roller Chain 12 B-1, 16 B-1, 20 B-1, 12 B-2, 16 B-2
    • Torque Protection - Main Input Shaft Cutout clutch
    • Torque Protection - Pick-up Radial Pin Clutch
    • Bearing and Sprocket Configuration Round drive shafts, greasable roller bearings
  • Tractor Requirements

    • Horsepower Required 80 hp 59.7 kw
    • Horsepower Recommended 110 hp 82 kw
  • Wide Pickup

    • Width (Tooth to Tooth) 73 in 185.4 cm
    • Width (On Outside Flair) 78 in 198.1 cm
    • Tooth Bars 5, camless
    • Number of Teeth 65 steel double tines
    • Stripper Band Diameter 12.3 in 31.2 cm
    • Drive 12 B-1
    • Floatation Pneumatic gauge wheels - 16 x 6.50 - 8 - spring assist
    • Pickup Lift Hydraulic
  • Standard Details

    • Bale Formation Horizontal chamber with bottom drum
    • Monitor/Controller E-link Pro
    • Machine Adjustments Gauge wheel height and hydraulic denisty
    • Miscellaneous Automatic chain lube system, shaft driven and adjustable, spring loaded bale ramp
    • Safety Equipment SMB sign, tail lights
    • Tailgate Cylinders Standard hydraulic cylinders, single acting
    • Density System Electronically adjustable via E-link Pro controller
    • Tire Size - Standard 21.5L-16.1 tires (604 Pro)
  • Bale Monitor

    • Monitor E-Link Pro
    • Bale Shape Feedback (Left (L) / Center (C) / Right (R) indicators) Left, Right
    • Number of wraps per bale for Net Wrap Yes
    • Manual Override Yes
    • Pause function Yes
    • "Near Full" and "Full Bale" alarms Yes, adjustable "Near Full" alarm
    • Tailgate locked alarm/indicator Yes
    • Ramp "home" indicator Yes
    • Alarm on/off/volume control Yes
    • Real-time bale size data Yes, bale diameter
    • Bales per hour Yes
    • Monitor Mount RAM MOunt
    • Self-diagnostic monitor and sensors Yes
    • Error history Yes
    • Touchscreen and button control Yes
    • Electronic Bale Density control Yes
    • Dual Knife Bank Control Yes
    • Field Statistics Yes
  • Optional Features - Netwrap System

    • Feed Mechanism Steel and rubber feed rollers
    • Net Tension Adjustable disk brake
    • Net Width Capable of standard and over width netwrap; 48 " and 51 " (121.9 cm and 129.5 cm)
    • Net Storage One extra roll storage located in easy load system, second extra roll storage inside left side door
  • Optional Features - Cutting Attachment

    • Knife Protection HydroFlexControl, hydraulic acumulator
    • Engage/Disengage Select in the E-Link control, hydraulic valve actuated
  • Optional Features

    • Safety Equipment Fire extinguisher, safety chain

See it in action

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More about the Vermeer 504 Pro baler

Why go pro?

Why go pro?

Are you a large hay producer or a custom operator? Is productivity important to you? If you answered “yes” to any of these questions, it might be a good time to go Pro.

Read more
Silage of the South

Silage of the South

Adjusting a conventional strategy of grazing and feeding dry hay to incorporate baled silage is a way to shore up available forage gaps when weather impedes hay growth and production.

Read more
Will baleage pay?

Will baleage pay?

Baleage is growing in popularity among forage and cattle producers for a few reasons, but does it meet the nutritional and economic needs of your operation?

Read more

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries Copyright © 2016 Vermeer Corporation. All Rights Reserved.