Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Maximum Length - Transport
    48.5 ft 14.8 m
  • Maximum Length - Conveyor Unfolded
    68.8 ft 21 m
  • Maximum Width (Transport)
    11.9 ft 3.6 m
  • Maximum Height (Transport)
    11.3 ft 3.4 m
  • Weight - Engine Option One
    70800 lbs 32114.3 kg
  • Front Mount Pad Weight (Operation)
    26300 lbs 11929.5 kg
  • Rear Mount Pad Weight (Operation)
    44500 lbs 20184.9 kg
  • Maximum Length - Transport
    48.5 ft 14.8 m
  • Maximum Length - Conveyor Unfolded
    68.8 ft 21 m
  • Maximum Reach of Loader
    29.5 ft 9 m
  • Maximum Width (Transport)
    11.9 ft 3.6 m
  • Maximum Height (Transport)
    144 in 365.8 cm
  • Maximum Height - Cab in Operating Position
    18.7 ft 5.7 m
  • Weight - Engine Option One
    82150 lbs 37262.6 kg
  • Front Mount Pad Weight (Operation)
    49450 lbs 22430.1 kg
  • Rear Mount Pad Weight (Operation)
    50250 lbs 22793 kg
  • Make and Model
    Weg W22 Weg W22
  • Gross Horsepower (Maximum)
    1000 hp 745.7 kw
  • Torque (Max)
    4412 ft-lb 5981.9 Nm
  • Cooling Medium
    Air Air
  • Torque Limiter
    PT Tech - Continuously engaged, friction type PT Tech - Continuously engaged, friction type
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 145T NEMA 145T
  • Horsepower
    2 hp 1.5 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1750 rpm 1750 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    2.61 2.61
  • Locked Rotor Amps
    19.6 19.6
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    5.9 ft-lb 8 Nm
  • Locked Rotor (%)
    240% 240%
  • Break Down
    300% 300%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    86.5 (NEMA Premium Efficiency) 86.5 (NEMA Premium Efficiency)
  • Power Factor
    0.84 0.84
  • Approximate Weight
    51 lbs 23.1 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 364/5T NEMA 364/5T
  • Horsepower
    75 hp 55.9 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1775 rpm 1775 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    84.1 84.1
  • Locked Rotor Amps
    538 538
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    219 ft-lb 296.9 Nm
  • Locked Rotor (%)
    240% 240%
  • Break Down
    260% 260%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.4 (NEMA Premium Efficiency) 95.4 (NEMA Premium Efficiency)
  • Power Factor
    0.86 0.86
  • Approximate Weight
    919 lbs 416.9 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 404/5T NEMA 404/5T
  • Horsepower
    100 hp 74.6 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1775 rpm 1775 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    111 111
  • Locked Rotor Amps
    810 810
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    292 ft-lb 395.9 Nm
  • Locked Rotor (%)
    240% 240%
  • Break Down
    260% 260%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.4 (NEMA Premium Efficiency) 95.4 (NEMA Premium Efficiency)
  • Power Factor
    0.88 0.88
  • Approximate Weight
    1140 lbs 517.1 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 586/7T NEMA 586/7T
  • Horsepower
    500 hp 372.8 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1190 rpm 1190 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    606 606
  • Locked Rotor Amps
    3818 3818
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    2206 ft-lb 2990.9 Nm
  • Locked Rotor (%)
    220% 220%
  • Break Down
    210% 210%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.8 (NEMA High Efficiency) 95.8 (NEMA High Efficiency)
  • Power Factor
    0.8 0.8
  • Approximate Weight
    4403 lbs 1997.2 kg
  • Added Items
    Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 90L IEC 90L
  • Horsepower
    2 hp 1.5 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1445 rpm 1445 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    3.21 3.21
  • Locked Rotor Amps
    23.8 23.8
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    NM NM
  • Insulation Class
    F F
  • Full Load Torque
    7.3 ft-lb 9.9 Nm
  • Locked Rotor (%)
    230% 230%
  • Break Down
    300% 300%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    85.6 85.6
  • Power Factor
    0.83 0.83
  • Approximate Weight
    51 lbs 23.1 kg
  • Added Items
    Terminal Block, NEMA C Face Mount Terminal Block, NEMA C Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 250S/M IEC 250S/M
  • Horsepower
    75 hp 55.9 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1480 rpm 1480 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    104 104
  • Locked Rotor Amps
    778 778
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    262 ft-lb 355.2 Nm
  • Locked Rotor (%)
    280% 280%
  • Break Down
    300% 300%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    94.7 94.7
  • Power Factor
    0.85 0.85
  • Approximate Weight
    970 lbs 440 kg
  • Added Items
    Terminal Block, NEMA C Face Mount Terminal Block, NEMA C Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 280S/M IEC 280S/M
  • Horsepower
    100 hp 74.6 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1485 rpm 1485 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    141 141
  • Locked Rotor Amps
    1060 1060
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    356 ft-lb 482.7 Nm
  • Locked Rotor (%)
    220% 220%
  • Break Down
    290% 290%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.2 (IE3) 95.2 (IE3)
  • Power Factor
    0.85 0.85
  • Approximate Weight
    926 lbs 420 kg
  • Added Items
    Terminal Block, NEMA C Face Mount Terminal Block, NEMA C Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 355M/L IEC 355M/L
  • Horsepower
    500 hp 372.8 kw
  • Voltage
    380 380
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1190 rpm 1190 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    743 743
  • Locked Rotor Amps
    4680 4680
  • Service Factor
    1.15 1.15
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    2191 ft-lb 2970.6 Nm
  • Locked Rotor (%)
    220% 220%
  • Break Down
    230% 230%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95.7 (IE2) 95.7 (IE2)
  • Power Factor
    0.79 0.79
  • Approximate Weight
    4386 lbs 1989.5 kg
  • Added Items
    Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing
  • Drive Type
    Direct Direct
  • Height
    87.4 in 222 cm
  • Width
    158 in 401.3 cm
  • Depth
    24.1 in 61.2 cm
  • Weight
    4300 lbs 1950.4 kg
  • Tub Table Thickness
    .5 in 1.3 cm
  • Tub Table Type
    T1 Steel T1 Steel
  • Table Tilt Degrees
    92 deg 92 deg
  • Millbox Opening
    27" x 69" (68.9 cm x 175.3 cm) 27" x 69" (68.9 cm x 175.3 cm)
  • Inside Diameter of Tub
    10 ft 3 m
  • Inside Flare Diameter - At Base of Tub
    10.3 ft 3.1 m
  • Inside Flare Diameter - At Tub Opening
    13 ft 4 m
  • Depth of Tub
    4.7 ft 1.4 m
  • Tub Capacity
    15 cu yd 11.5 cu m
  • Wall Type
    T1 Steel T1 Steel
  • Loading Height
    11.4 ft 3.5 m
  • Drive Type
    Closed loop hydraulc, continuous sprocket Closed loop hydraulc, continuous sprocket
  • Drive Chain
    ANSI #160 roller chain ANSI #160 roller chain
  • Drive Tensioner
    Hydraulic Hydraulic
  • Drive Motor
    Hydraulic, low speed/high torque (qty 2) Hydraulic, low speed/high torque (qty 2)
  • Tub Roller Quantity
    8 carrier, 8 guide (16 total) 8 carrier, 8 guide (16 total)
  • Tub Speed
    7.2 rpm 7.2 rpm
  • Tub Agitators
    4 4
  • Thrown Object Restraint System
    Pivoting tub cover assembly Pivoting tub cover assembly
  • Tub Cover Description
    Conical cover wit hhydraulic swing-away Conical cover wit hhydraulic swing-away
  • Tub Cover Positions
    Transport and operate with hydraulic lock Transport and operate with hydraulic lock
  • Rotor Deflector
    Standard Standard
  • Wear Liner Thickness
    .5 in 1.3 cm
  • Wear Liner Type
    AR400 AR400
  • Falling Object Protection at Control Station
    Overhead and side protection Overhead and side protection
  • Drum Diameter
    22.5 in 57.2 cm
  • Tip Diameter
    31 in 78.7 cm
  • Drum Cutting Width
    65.3 in 165.9 cm
  • Drum Skin Thickness
    1.5 in 3.8 cm
  • Drum Speed
    1190 rpm 1190 rpm
  • Tip Speed
    9960 rpm 9960 rpm
  • Bearing Type
    Double row, spherical roller Double row, spherical roller
  • Bearing - Inner Race Diameter
    5.5 in 14 cm
  • Bearing - Dynamic Capacity
    145000 lbs 65770.9 kg
  • Number of Hammers
    10 10
  • Number of Cutters
    20 20
  • Cutter Block Types
    2 bolt retension with 7/8" (2.2 cm) UNC fasteners, 2.75" (7 cm) and 3.5" (8.9 cm) wide block options 2 bolt retension with 7/8" (2.2 cm) UNC fasteners, 2.75" (7 cm) and 3.5" (8.9 cm) wide block options
  • Center Retention Pin Dimensions
    2" (5.1 cm) 2" (5.1 cm)
  • Number of Wipers
    4 4
  • Screen Weight
    500 lbs 226.8 kg
  • Screen Dimensions
    72.4" x 35.8" x 10.3" (183.9 cm x 91 cm x 21.2 cm) 72.4" x 35.8" x 10.3" (183.9 cm x 91 cm x 21.2 cm)
  • Screen Type
    AR400, reversible (qty 2) AR400, reversible (qty 2)
  • Breaker Bar Type
    T1 steel, replaceable T1 steel, replaceable
  • Breaker Bar Dimensions
    2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm) 2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm)
  • Number of Sides
    4 useable edges 4 useable edges
  • Screen Area
    4162 sq in 26851.6 sq cm
  • Distance - Screen to Millbox Wall
    21.4 in 54.4 cm
  • Length
    24 ft 7.3 m
  • Width
    48 in 121.9 cm
  • Belt Design
    One piece, 330# with V-cleat One piece, 330# with V-cleat
  • Splice
    Flexco R2 stainless steel Flexco R2 stainless steel
  • Return Roller Quantity
    6 standard and 2 vibrating roller 6 standard and 2 vibrating roller
  • Idler Roller Diameter
    12 in 30.5 cm
  • Idler Roller Bearing
    1- 15/16", 4 bolt flange 1- 15/16", 4 bolt flange
  • Standard Drive Roller Diameter
    13.8 in 35.1 cm
  • Magnetic Drive Roller Diameter
    13.8 in 35.1 cm
  • Drive Motor
    Geroler Geroler
  • Belt Speed
    960 ft/min 292.6 m/min
  • Load Height
    14.2 ft 4.3 m
  • Tank capacity
    100 gal 378.5 L
  • Recommended Oil
    Hy-Power 68 Hy-Power 68
  • Filtration Method
    In-tank return filters (qty 2) In-tank return filters (qty 2)
  • Number of Coolers
    1 1
  • Components
    Conveyor with auxiliary valve Conveyor with auxiliary valve
  • System Type
    Load sense, pressure compensated Load sense, pressure compensated
  • Pump Type
    Axial piston, variable displacement Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    34.1 gpm 129.1 L/min
  • System relief pressure
    3000 psi 206.8 bar
  • System Type
    Closed loop Closed loop
  • Pump Type
    Axial piston, variable displacement Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    34.1 gpm 129.1 L/min
  • System relief pressure
    3000 psi 206.8 bar
  • Motor Series
    Heavy-duty, high torque (qty 2) Heavy-duty, high torque (qty 2)
  • System Type
    Load sense, pressure compensated Load sense, pressure compensated
  • Pump Type
    Axial piston, variable displacement Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    52.3 gpm 198 L/min
  • System relief pressure
    3500 psi 241.3 bar
  • System Voltage
    24 VDC 24 VDC
  • System Protection
    Fused Fused
  • Display Type
    LCD multifunction, analog hydraulic gauges LCD multifunction, analog hydraulic gauges
  • Machine Information
    Operational, diagnostic, and system parameters Operational, diagnostic, and system parameters
  • Operational Faults
    SAE J1939 diagnostic codes SAE J1939 diagnostic codes
  • Gauges
    Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure
  • Switches
    Moisture proof, toggle switch Moisture proof, toggle switch
  • Display Type
    LCD multifunction LCD multifunction
  • Motor Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Switches
    Sealed membrane Sealed membrane
  • Operating Range
    300' (91.4 m) 300' (91.4 m)
  • Battery Type
    AA (qty 6) AA (qty 6)
  • Channel Setting
    50 channels 50 channels
  • Display Type
    LCD multifunction LCD multifunction
  • Engine Information
    Yes Yes
  • Motor Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Gauges
    Loader hydraulic pressure Loader hydraulic pressure
  • Switches
    Moisture proof, toggle style Moisture proof, toggle style
  • Frame Description
    Continuous I-beam Continuous I-beam
  • Loader Reach
    29.5 ft 9 m
  • Pedestal/Cab Rotation
    370 deg 370 deg
  • Loader Lift Capacity at Full Reach
    4000 lbs 1814.4 kg
  • Loader Lift Capacity at 10 ' (3.05 m)
    12000 lbs 5443.1 kg
  • Grapple Type
    Multiple Tine, Continuous 360 Degree Rotation Multiple Tine, Continuous 360 Degree Rotation
  • Grapple Weight
    1451 lbs 658.2 kg
  • Loader Controls
    Pilot operated Pilot operated
  • Climate Controls
    A/C and heat A/C and heat
  • Radio
    AM/FM, CD and 2.4" (6.1 cm) speakers AM/FM, CD and 2.4" (6.1 cm) speakers
  • Window Type
    3/8" (.95 cm) polycarbonate 3/8" (.95 cm) polycarbonate
  • Front Intrusion Guard
    5/8" (1.6 cm) diameter reinforced wire mesh 5/8" (1.6 cm) diameter reinforced wire mesh
  • Air Compressor Brand
    Mi-T-M Mi-T-M
  • Engine
    7.5 hp (5.6 kW) 7.5 hp (5.6 kW)
  • Maximum Pressure
    175 psi 12.1 bar
  • Maximum Air Flow
    23.4 cfm .7 cmm
  • Tank capacity
    30 gal 113.6 L
  • Screens
    Optional Optional
  • Special Tools Group
    Optional Optional
  • Special Paint
    Optional Optional
  • Extended Warranty
    Optional Optional
  • Preventative Maintenance
    Optional Optional
  • See Product