Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Length
    118 in 299.7 cm
  • Width
    50.1 in 127.3 cm
  • Height
    53 in 134.6 cm
  • Overall Width Transport (without duals)
    35.5 in 90.2 cm
  • Overall Width Transport (with duals)
    50.1 in 127.3 cm
  • Overall Height Transport
    53 in 134.6 cm
  • Weight - Engine Option One
    1950 lbs 884.5 kg
  • Weight With Chip Blade Option (Additional)
    85 lbs 38.6 kg
  • Sound Power
    107.6 dB(A) 107.6 dB(A)
  • Make and Model
    Briggs & Stratton Vanguard® EFI/ETC Briggs & Stratton Vanguard® EFI/ETC
  • Number of Cylinders
    2 2
  • Gross Horsepower (Maximum)
    40 hp 29.8 kw
  • Torque (Max)
    56 ft-lb 75.9 Nm
  • Fuel Tank Capacity
    10 gal 37.9 L
  • Max Fuel Consumption
    2.2 gph 8.3 lph
  • Fuel Type
    Gasoline Gasoline
  • Air Cleaner
    Dry-type safety element and restriction indicator Dry-type safety element and restriction indicator
  • Oil Filter
    Spin-on Spin-on
  • Recommended Oil
    10W30 (see engine manual) 10W30 (see engine manual)
  • Oil Volume with Filter
    2.5 qt 2.4 L
  • Maximum Angle of Continuous Operation
    25 deg 25 deg
  • Cooling Medium
    Air Air
  • Alternator
    20/50 Amp (rpm-based) 20/50 Amp (rpm-based)
  • Clutch Type
    Electric clutch with brake Electric clutch with brake
  • Cutterwheel Diameter without Teeth
    20 in 50.8 cm
  • Cutterwheel Thickness
    .5 in 1.3 cm
  • Cutterwheel Speed
    1525 rpm 1525 rpm
  • Cutterwheel Straight Line Dimension
    47 in 119.4 cm
  • Cutterwheel Cut Above Ground
    24 in 61 cm
  • Cutterwheel Cut Below Ground
    15 in 38.1 cm
  • Tooth Description
    Vermeer cutting system (VCS) Vermeer cutting system (VCS)
  • Number of Teeth
    18 18
  • Reversible Pockets/Teeth
    16 16
  • Cutterwheel Guard
    Standard Standard
  • Chip Containment
    7.5 cu ft .2 cu m
  • Cutterwheel Diameter without Teeth
    17 in 43.2 cm
  • Cutterwheel Thickness
    .5 in 1.3 cm
  • Cutterwheel Speed
    1525 rpm 1525 rpm
  • Cutterwheel Straight Line Dimension
    47 in 119.4 cm
  • Cutterwheel Cut Above Ground
    24 in 61 cm
  • Cutterwheel Cut Below Ground
    15 in 38.1 cm
  • Tooth Description
    Yellow Jacket™ cutter system Yellow Jacket™ cutter system
  • Number of Teeth
    20 20
  • Cutterwheel Guard
    Standard Standard
  • Number of Indexes
    2 2
  • Number of Pockets
    20 20
  • Reversible Pockets/Teeth
    20 20
  • Chip Containment
    7.5 cu ft .2 cu m
  • Belt Type
    V-belt V-belt
  • Number of Primary Belts
    2 individual (matched pair) 2 individual (matched pair)
  • Jackshaft Dimension
    1.3 1.3
  • Jackshaft Bearing Type
    Sealed ball Sealed ball
  • Bearing Dimensions
    1.3 bore 1.3 bore
  • Number of Secondary Belts
    6 banded 6 banded
  • Cutterwheel Shaft
    1.8 1.8
  • Bearing Dimensions - Secondary Belt
    1.8 1.8
  • Tank capacity
    6.5 gal 24.6 L
  • Recommended Oil Type
    Vermeer HyPower 68 Vermeer HyPower 68
  • System Type
    Open-loop series system Open-loop series system
  • Filtration Method
    10-micron fill strainer and 6-micron return filter 10-micron fill strainer and 6-micron return filter
  • Pump Flow at Maximum RPM
    6.2 gpm 23.5 L/min
  • System relief pressure
    2470 psi 170.3 bar
  • Flow Control
    SmarSweep SmarSweep
  • Directional Control
    Electric over hydraulic Electric over hydraulic
  • System Voltage
    12 V 12 V
  • Battery
    550 CCA 550 CCA
  • Warning Lights
    Oil pressure, engine fault, operator presence status, clutch engage/disengage status Oil pressure, engine fault, operator presence status, clutch engage/disengage status
  • Switches
    Two-speed 2x4 and 4x4 ground drive, cutterwheel engage/disengage, blade (if equipped) Two-speed 2x4 and 4x4 ground drive, cutterwheel engage/disengage, blade (if equipped)
  • Controller
    Danfoss® Danfoss®
  • Shutdown System
    Engine low oil pressure will derate engine Engine low oil pressure will derate engine
  • Frame Description
    Welded tube and plate steel Welded tube and plate steel
  • Control Station Description
    Fixed side Fixed side
  • Toolbox Description
    Standard Standard
  • Steerable Axle Type
    Hydraulic steering oscillating axle Hydraulic steering oscillating axle
  • Degree of Oscillation
    12 deg 12 deg
  • Tires - Option One
    5.7 in x 8 in (14.5 cm x 20.3 cm) dual standard 5.7 in x 8 in (14.5 cm x 20.3 cm) dual standard
  • Fender Description
    Yes Yes
  • Axle/Suspension
    Rigid/fixed (rear) Rigid/fixed (rear)
  • Brake Type
    Spring-applied, hydraulic release at rear motors Spring-applied, hydraulic release at rear motors
  • Low Speed Travel
    65 ft/min 19.8 m/min
  • High Speed Travel
    130 ft/min 39.6 m/min
  • Chip Blade Dimension
    33-in wide x 12-in tall (83.8 cm x 30.5 cm) 33-in wide x 12-in tall (83.8 cm x 30.5 cm)
  • Blade Travel Above Ground
    8 in 20.3 cm
  • Blade Travel Below Ground
    2.5 in 6.4 cm
  • See Product