Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Length
    110 in 279.4 cm
  • Width
    49.8 in 126.5 cm
  • Height
    53 in 134.6 cm
  • Overall Width Transport (without duals)
    35 in 88.9 cm
  • Overall Width Transport (with duals)
    49.8 in 126.5 cm
  • Overall Height Transport
    53 in 134.6 cm
  • Weight - Engine Option One
    1320 lbs 598.7 kg
  • Sound Power
    106 106
  • Make and Model
    Briggs & Stratton Vanguard Briggs & Stratton Vanguard
  • Gross Horsepower (Maximum)
    35 hp 26.1 kw
  • Torque (Max)
    53 ft-lb 71.9 Nm
  • Fuel Tank Capacity
    6 gal 22.7 L
  • Max Fuel Consumption
    3.2 gph 12.1 lph
  • Fuel Type
    Gasoline Gasoline
  • Air Cleaner
    Dry-type safety element and restriction indicator Dry-type safety element and restriction indicator
  • Oil Filter
    Spin-on Spin-on
  • Recommended Oil
    10W30 (See engine manual) 10W30 (See engine manual)
  • Oil Volume with Filter
    2 qt 1.9 L
  • Cooling Medium
    Air Air
  • Alternator
    20 amp 20 amp
  • Clutch Type
    Electric clutch with brake Electric clutch with brake
  • Cutterwheel Diameter
    17 in 43.2 cm
  • Cutterwheel Thickness
    .5 in 1.3 cm
  • Cutterwheel Speed
    1400 rpm 1400 rpm
  • Cutterwheel Straight Line Dimension
    47 in 119.4 cm
  • Cutterwheel Cut Above Ground
    24 in 61 cm
  • Cutterwheel Cut Below Ground
    15 in 38.1 cm
  • Tooth Description
    Yellow Jacket™ cutter system Yellow Jacket™ cutter system
  • Number of Teeth
    16 16
  • Number of Indexes
    2 2
  • Number of Pockets
    16 16
  • Reversible Pockets/Teeth
    16 16
  • Cutterwheel Guard
    Standard Standard
  • Chip Containment
    7.7 cu ft .2 cu m
  • Belt Type
    V-Belt V-Belt
  • Number of Primary Belts
    2 individual (matched pair) 2 individual (matched pair)
  • Jackshaft Dimension
    1.3 1.3
  • Jackshaft Bearing Type
    Sealed ball Sealed ball
  • Bearing Dimensions
    1.3 bore 1.3 bore
  • Number of Secondary Belts
    6 Banded 6 Banded
  • Cutterwheel Shaft
    1.8" (4.8 cm) 1.8" (4.8 cm)
  • Bearing Dimensions - Secondary Belt
    1.8" (4.8 cm) double spherical roller pillow block 1.8" (4.8 cm) double spherical roller pillow block
  • Tank capacity
    4 gal 15.1 L
  • Recommended Oil Type
    Vermeer HyPower 68 Vermeer HyPower 68
  • System Type
    Open-loop series system Open-loop series system
  • Filtration Method
    Pump suction strainer (100 mesh) and 6 micron return filter Pump suction strainer (100 mesh) and 6 micron return filter
  • Pump Flow at Maximum RPM
    3.7 gpm 14 L/min
  • System relief pressure
    2030 psi 140 bar
  • Flow Control
    AutoSweep® (option) or 2 speed ground drive AutoSweep® (option) or 2 speed ground drive
  • Directional Control
    Manual hydraulic value Manual hydraulic value
  • System Voltage
    12 V 12 V
  • Battery
    400 CCA 400 CCA
  • Standard Gauges
    Hourmeter Hourmeter
  • Warning Lights
    Operator presence status, clutch engage/disengagement status Operator presence status, clutch engage/disengagement status
  • Switches
    Two-speed ground drive, clutch engage/disengage, operator presence handles Two-speed ground drive, clutch engage/disengage, operator presence handles
  • Controller
    Vermeer ACS Vermeer ACS
  • Shutdown System
    Engine low oil pressure Engine low oil pressure
  • Frame Description
    Welded tube and plate steel Welded tube and plate steel
  • Control Station Description
    Fixed side location Fixed side location
  • Toolbox Description
    Standard Standard
  • Steerable Axle Type
    Hydraulic steering, oscillating axle Hydraulic steering, oscillating axle
  • Tires - Option One
    5.7" x 8" (14.5 x 20.3 cm) duals standard 5.7" x 8" (14.5 x 20.3 cm) duals standard
  • Fender Description
    Yes Yes
  • Axle/Suspension
    Rigid/Fixed (Rear) Rigid/Fixed (Rear)
  • Low Speed Travel
    66 ft/min 20.1 m/min
  • High Speed Travel
    133 ft/min 40.5 m/min