The BC190XL is built tough to support your daily business and surpass expectations.

Find A Dealer Request More Info

Engineered with exclusive features that promote user-friendly operation, high efficiency and operator safety, the BC190XL also delivers outstanding maintenance access and ease of transport. This makes the BC190XL a great value for arborists, landscape contractors and rental stores who need to get rid of their woody waste material.

The BC190XL is built tough to support your daily business and surpass expectations.

Engineered with exclusive features that promote user-friendly operation, high efficiency and operator safety, the BC190XL also delivers outstanding maintenance access and ease of transport. This makes the BC190XL a great value for arborists, landscape contractors and rental stores who need to get rid of their woody waste material.

Find A Dealer Request More Info

Features & Benefits

20.3-cm x 30.5-cm infeed opening

Wide letterbox style opening allows easy feeding of material with side branches and greatly reduces the need to precut material down to size.

35.9-kW (48.8-PS/48,1-hp) 4-cylinder, water-cooled Kubota diesel engine

Quiet and fuel-efficient engine providing high cutting performance with proven market-leading reliability and support. Oversize cooling system provides high capacity even when subjected to high dust and airborne debris.

Offset oversized horizontal feed rollers

Large-diameter feed rollers combined with 390 kg of clamping force allow even the most densely branched material to be pulled in without delay. The offset lower roller greatly enhances the feeding of very short pieces and provides superior grip on awkwardly shaped material.

SmartFeed with infeed auto reverse

Productivity is enhanced by providing engine load management to allow appropriate power for processing of the material and enabling reduced fuel consumption when not needed. Infeed auto reverse and refeed of difficult material helps reduce operator effort or resawing of material.

Localised service points

All filters and engine service points are quickly accessible through the right engine door to help minimize maintenance time and for convenience. Cutter bearing grease points are located on the outside, opposite the disc for quick and direct access.

Oversized bearings

Drive shaft, belt tensioner, feed roller and cutter disc bearings are all oversized and are taken from our larger chippers. Proven reliability can contribute toward reduced maintenance and service costs.

Feed table above 600 mm from ground

Infeed table is located at a height ensuring good feeding position and enhanced comfort for the operator. Fully floating lower and side feed stop bars meet the most stringent EC requirements, enabling enhanced operator control of chipping operations.

Fully enclosed body

Chipping mechanism is enclosed within a compact cover that produces reduced noise emissions and keeps system clear of debris. Quick and easy access to key service points, fluid tanks and chipping mechanism is achieved through access doors, allowing plenty of room to work for reduced operator effort and fatigue during service operations.

Specifications

Compare Models
  • Discharge System

    • Bottom Thickness .1 in .3 cm
    • Top Thickness .1 in .3 cm
    • Side Wall Thickness .1 in .3 cm
    • Deflector Thickness .1 in .2 cm
    • Chute Rotation Angle 270 deg
    • Rotation Type Pin
    • Rotational Lock Clamp
  • Feed System

    • Infeed Throat Capacity 8” (203 mm) X 12” (305 mm)
  • Hydraulic System

    • Tank capacity 6 gal 22.7 L
    • Recommended Oil Type Shell Tellus 68
    • System relief pressure 2500 psi 172.4 bar
  • Chassis

    • Hitch Type Alko 161S 50 mm ball
    • Fender Description Bolt on-steel 2 mm
    • Axle/Suspension Alko Plus 1500 kg
    • Tires - Option One 175R14C8PR
    • Wheels - Option One 550 lb Jockey Wheel
    • Brake Type 200 mm x 50 mm surge brake activated
  • Electrical System

    • System Voltage 12
    • Controller CB02
    • Display LED
  • Cutter Drive Components - Engine Option One

    • Number of Bearings 2
    • Type Dual Spherical Roller
    • Manufacturer Linkbelt
    • Belt Idler/Tensioner Over center idler arm, manually adjusted
    • Belt Type 3 Rib Classic B, Banded Aramid with Clutching Cover
  • Drum/Disc Cutting System

    • Material Capacity 8 in 20.3 cm
    • Width 12 in 30.5 cm
    • Number of Knives 4
    • Material A8 Chipper Steel
    • Useable Edges 2
    • Number of Bolts/Knife 2
  • General Dimensions and Weights

    • Length - Feed Table Up, Tongue In 147.2 in 374 cm
    • Width 60.2 in 153 cm
    • Height 97.6 in 248 cm
    • Weight - Engine Option One 3262.8 lbs 1480 kg
    • Tongue Weight - Engine Option One 165.3 lbs 75 kg
  • Engine Option One

    • Make and Model Kubota V2203-M-E3B
    • Number of Cylinders 4
    • Gross Horsepower (Maximum) 48.1 hp 35.9 kw
    • Torque (Max) 106.9 ft-lb 145 Nm
    • Fuel Tank Capacity 14.8 gal 56 L
    • Fuel Type Diesel
    • Air Cleaner Donaldson 2 Stage Dry
    • Oil Filter Spin On
    • Recommended Oil API CH-4/SJ
    • Cooling Medium Liquid
    • Alternator Kubota-40 Amps
    • Fan 381 mm Suction
    • Clutch Type Group 24 - 660 CCA

See it in action

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required Field
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy, terms and conditions. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Unmatched partnerships

Brush chipper knives

Brush chipper knives

Built tough enough to withstand the daily grind, Vermeer parts and accessories surpass expectations.

Learn more
MyVermeer

MyVermeer

Get to know your equipment even when you're on the go.

Register now

Copyright © 2019 Vermeer Corporation. All Rights Reserved.