Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Weight
    39700 lbs 18007.6 kg
  • Hitch Weight
    13400 lbs 6078.1 kg
  • Transport Length
    46.5 ft 14.2 m
  • Transport Width
    102 in 259.1 cm
  • Transport Height
    13.1 ft 4 m
  • Operation Length
    86 ft 26.2 m
  • Operation Width
    102 in 259.1 cm
  • Operation Height
    15.9 ft 4.9 m
  • Capacity
    Approximately 150 cu yd (114.7 m³) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40% Approximately 150 cu yd (114.7 m³) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40%
  • Make and Model
    Cummins QSB 3.8l Tier 4 Final Cummins QSB 3.8l Tier 4 Final
  • Number of Cylinders
    4 4
  • Engine Rating
    120 hp 120 hp
  • Fuel Tank Capacity
    73 gal 276.3 L
  • Fuel Consumption
    3.1 gph (11.7 L/hr) 3.1 gph (11.7 L/hr)
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg 30 deg
  • Battery
    950 CCA 950 CCA
  • Oil Filter
    Spin-on Spin-on
  • Recommended Oil
    Mobil 15W40 Mobil 15W40
  • System Voltage
    12 V, 134 amp alternator 12 V, 134 amp alternator
  • Air Cleaner
    Dual element Dual element
  • Radiator Fan
    Suction Suction
  • Operation
    62.9 gpm @2500 psi (238.1 L/min @ 172.4 bar) 62.9 gpm @2500 psi (238.1 L/min @ 172.4 bar)
  • Tank capacity
    157 gal 594.3 L
  • Frame Description
    Four independent hydraulic jacklegs Four independent hydraulic jacklegs
  • Axle/Suspension
    Leaf spring Leaf spring
  • Capacity
    22500 lbs 10205.8 kg
  • Tires - Option One
    235-75R 17.5 H qty 8 235-75R 17.5 H qty 8
  • Hopper Capacity
    5 cu yd 3.8 cu m
  • Hopper Bottom Width
    34 in 86.4 cm
  • Apron Conveyor Speed
    0-35 fpm (0-10.7 m/min)       0-35 fpm (0-10.7 m/min)      
  • Apron Opening Height
    34 in 86.4 cm
  • Apron Opening Width
    37 in 94 cm
  • Hopper Height
    9.5' (2.9 m) from ground level at operating incline 9.5' (2.9 m) from ground level at operating incline
  • Hopper Opening
    13.2' x 5' (4 m x 1.5 m) 13.2' x 5' (4 m x 1.5 m)
  • Apron Conveyor Length
    15 ft 4.6 m
  • Apron Conveyor Belt Width
    42 in 106.7 cm
  • Apron Conveyor Rollers
    6" (10.2 cm) diameter qty. 13 6" (10.2 cm) diameter qty. 13
  • Drum Operation
    0-33.1 gpm (0-125.3 L/min)       0-33.1 gpm (0-125.3 L/min)      
  • Drum Motor
    48.8 cu in (800 cu cm) displacement       48.8 cu in (800 cu cm) displacement      
  • Drum Diameter
    5 ft 1.5 m
  • Drum Support Description
    Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
  • Drum Length
    21 ft 6.4 m
  • Thrust Bearing Diameter
    5 in 12.7 cm
  • Thrust Bearing Face
    2.9 in 7.4 cm
  • Drum Speed
    0-24 rpm 0-24 rpm
  • Drum Drive Chain
    120 WT 120 WT
  • Drum Angle Adjustability
    3-5 degrees 3-5 degrees
  • Maximum Screen Panels
    6 6
  • Brush Diameter
    14 in 35.6 cm
  • Bristle Material
    Polyethylene Polyethylene
  • Brush Assembly Support
    Two 1.25" (3.2 cm) sealed ball bearings Two 1.25" (3.2 cm) sealed ball bearings
  • Conveyor Belt Width
    36 in 91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm)    220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm)   
  • Head/Tail Pulley Type
    Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide    Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide   
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block    2.5" (6.4 cm) pillow block   
  • Rubber Flashing
    Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm)    Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm)   
  • Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (61 cm) centers    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (61 cm) centers   
  • Tail Pulley Takeup
    12 in 30.5 cm
  • Self-Cleaning Return Idlers
    7, each 4" (10.2 cm) diameter    7, each 4" (10.2 cm) diameter   
  • Fines Conveyor Frame
    Part of trailer frame Part of trailer frame
  • Conveyor Motor Displacement
    28.3 cu-in 463.8 cu-cm
  • Fines Conveyor Length
    65 ft 19.8 m
  • Fines Belt Speed
    515 ft/min 157 m/min
  • Conveyor Belt Width
    36 in 91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    14.5' with drum at 4 degree 14.5' with drum at 4 degree
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block 2.5" (6.4 cm) pillow block
  • Rubber Flashing
    Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
  • Troughing Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    12 in 30.5 cm
  • Self-Cleaning Return Idlers
    7, each 4" (10.2 cm) diameter 7, each 4" (10.2 cm) diameter
  • Fines Conveyor Frame
    4" x 8" (10.2 cm x 20.3 cm) structural steel tubing 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • Conveyor Motor Displacement
    15.9 cu-in 260.6 cu-cm
  • Fines Conveyor Length
    30.5 ft 9.3 m
  • Fines Belt Speed
    705 ft/min 214.9 m/min
  • Conveyor Belt Type
    150 lb (99.8 kg), 2-ply, 1/32" x 1/32" (.8 mm x .8 mm), vulcanized 150 lb (99.8 kg), 2-ply, 1/32" x 1/32" (.8 mm x .8 mm), vulcanized
  • Head/Tail Pulley Type
    Rubber-lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide    Rubber-lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide   
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block    2.5" (6.4 cm) pillow block   
  • Rubber Flashing
    Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm)    Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm)   
  • Idler Type
    30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104.1 cm) centers    30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104.1 cm) centers   
  • Self-Cleaning Return Idlers
    4, each 4" (10.2 cm) diameter    4, each 4" (10.2 cm) diameter   
  • Fines Conveyor Frame
    2" x 8" (5.1 cm x 20.3 cm) structural steel building    2" x 8" (5.1 cm x 20.3 cm) structural steel building   
  • Overs Conveyor Length
    20 ft 6.1 m
  • Maximum Variable Overs Belt Speed
    290 ft/min 88.4 m/min
  • Conveyor Belt Size
    36" (91.4 cm) wide with raised crescent 36" (91.4 cm) wide with raised crescent
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    3' (.9 m) x 10' (3.1 m) 3' (.9 m) x 10' (3.1 m)
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block 2.5" (6.4 cm) pillow block
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    12 in 30.5 cm
  • Solid Return Idler Size
    4" (10.2 cm) diameter 4" (10.2 cm) diameter
  • Overs Conveyor Frame
    2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing 2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing
  • See Product