Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Maximum Length - Transport
    29.3 ft 8.9 m
  • Maximum Length - Conveyor Unfolded
    51.3 ft 15.6 m
  • Maximum Width (Transport)
    8.4 ft 2.5 m
  • Maximum Height (Transport)
    11.8 ft 3.6 m
  • Weight - Engine Option One
    42080 lbs 19087.2 kg
  • Front Mount Pad Weight (Operation)
    14800 lbs 6713.2 kg
  • Rear Mount Pad Weight (Operation)
    30650 lbs 13902.6 kg
  • Make and Model
    WEG W22 WEG W22
  • Gross Horsepower (Maximum)
    500 hp 372.8 kw
  • Torque (Max)
    1451 ft-lb 1967.3 Nm
  • Cooling Medium
    Air Air
  • Torque Limiter
    PT Tech - Continuously engaged, friction type PT Tech - Continuously engaged, friction type
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 145T NEMA 145T
  • Horsepower
    2 hp 1.5 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1750 rpm 1750 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    2.61 2.61
  • Locked Rotor Amps
    19.6 19.6
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    5.9 ft-lb 8 Nm
  • Locked Rotor (%)
    240% 240%
  • Break Down
    300% 300%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    86.5 (NEMA Premium Efficiency) 86.5 (NEMA Premium Efficiency)
  • Power Factor
    0.84 0.84
  • Approximate Weight
    51 lbs 23.1 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 364/5TS NEMA 364/5TS
  • Horsepower
    60 hp 44.7 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1775 rpm 1775 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    68.3 68.3
  • Locked Rotor Amps
    451 451
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    175 ft-lb 237.3 Nm
  • Locked Rotor (%)
    240% 240%
  • Break Down
    260% 260%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95 (NEMA Premium Efficiency) 95 (NEMA Premium Efficiency)
  • Power Factor
    0.87 0.87
  • Approximate Weight
    869 lbs 394.2 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount, Short Shaft Terminal Block, NEMA C-Face Mount, Short Shaft
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA L447/9T NEMA L447/9T
  • Horsepower
    500 hp 372.8 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1785 rpm 1785 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    561 561
  • Locked Rotor Amps
    4040 4040
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    1451 ft-lb 1967.3 Nm
  • Locked Rotor (%)
    250% 250%
  • Break Down
    260% 260%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    96.2 (NEMA Premium Efficiency) 96.2 (NEMA Premium Efficiency)
  • Power Factor
    0.86 0.86
  • Approximate Weight
    3462 lbs 1570.3 kg
  • Added Items
    Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E bearing Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E bearing
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    NEMA 586/7T NEMA 586/7T
  • Horsepower
    500 hp 372.8 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1790 rpm 1790 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    567 567
  • Locked Rotor Amps
    4026 4026
  • Service Factor
    1.15 1.15
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    1454 ft-lb 1971.4 Nm
  • Locked Rotor (%)
    260% 260%
  • Break Down
    260% 260%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    96.1 (NEMA Premium Efficiency) 96.1 (NEMA Premium Efficiency)
  • Power Factor
    0.85 0.85
  • Approximate Weight
    4041 lbs 1833 kg
  • Added Items
    Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E bearing Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E bearing
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 90L IEC 90L
  • Horsepower
    2 hp 1.5 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1445 rpm 1445 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    3.21 3.21
  • Locked Rotor Amps
    23.8 23.8
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    7.3 ft-lb 9.9 Nm
  • Locked Rotor (%)
    230% 230%
  • Break Down
    300% 300%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    85.6 85.6
  • Power Factor
    0.83 0.83
  • Approximate Weight
    51 lbs 23.1 kg
  • Added Items
    Terminal Block, NEMA C Face Mount Terminal Block, NEMA C Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 225S/M IEC 225S/M
  • Horsepower
    60 hp 44.7 kw
  • Voltage
    380 380
  • Frequency
    50 50
  • Phase
    3 3
  • Rated Speed
    1475 rpm 1475 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    83.9 83.9
  • Locked Rotor Amps
    663 663
  • Service Factor
    1 1
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    213 ft-lb 288.8 Nm
  • Locked Rotor (%)
    250% 250%
  • Break Down
    270% 270%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    94.7 94.7
  • Power Factor
    0.86 0.86
  • Approximate Weight
    926 lbs 420 kg
  • Added Items
    Terminal Block, NEMA C Face Mount Terminal Block, NEMA C Face Mount
  • Drive Type
    Direct Direct
  • Manufacturer
    Weg W22 Weg W22
  • Frame
    IEC 355M/L IEC 355M/L
  • Horsepower
    500 hp 372.8 kw
  • Voltage
    380 380
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1790 rpm 1790 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    688 688
  • Locked Rotor Amps
    5227 5227
  • Service Factor
    1.15 1.15
  • Duty Cycle
    S1 S1
  • NEMA Design
    N N
  • Insulation Class
    F F
  • Full Load Torque
    1454 ft-lb 1971.4 Nm
  • Locked Rotor (%)
    260% 260%
  • Break Down
    260% 260%
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    96.1 96.1
  • Power Factor
    0.85 0.85
  • Approximate Weight
    4041 lbs 1833 kg
  • Added Items
    Terminal Blocks; thermostats, inverter duty; D.E. ground brush & insulated N.D.E. bearing Terminal Blocks; thermostats, inverter duty; D.E. ground brush & insulated N.D.E. bearing
  • Drive Type
    Direct Direct
  • Height
    87 in 221 cm
  • Width
    72 in 182.9 cm
  • Depth
    27 in 68.6 cm
  • Weight
    1800 lbs 816.5 kg
  • Height
    93 in 236.2 cm
  • Width
    119 in 302.3 cm
  • Depth
    28 in 71.1 cm
  • Weight
    3020 lbs 1369.8 kg
  • Tub Table Thickness
    .4 in 1 cm
  • Tub Table Type
    T1 Steel T1 Steel
  • Table Tilt Degrees
    91 deg 91 deg
  • Millbox Opening
    24.2" x 47.9" (61.4 cm x 121.5 cm) 24.2" x 47.9" (61.4 cm x 121.5 cm)
  • Inside Diameter of Tub
    8 ft 2.4 m
  • Inside Flare Diameter - At Base of Tub
    8.1 ft 2.5 m
  • Inside Flare Diameter - At Tub Opening
    12.3 ft 3.7 m
  • Depth of Tub
    5 ft 1.5 m
  • Tub Capacity
    11.3 cu yd 8.6 cu m
  • Wall Thickness
    .3 in .6 cm
  • Wall Type
    T1 Steel T1 Steel
  • Loading Height
    10.6 ft 3.2 m
  • Drive Type
    Continuous sprocket Continuous sprocket
  • Drive Chain
    120H roller chain 120H roller chain
  • Drive Tensioner
    Standard Standard
  • Drive Motor
    Open loop Open loop
  • Tub Roller Quantity
    8 carrier, 8 guide (16 total) 8 carrier, 8 guide (16 total)
  • Tub Speed
    10 rpm 10 rpm
  • Tub Agitators
    4 4
  • Thrown Object Restraint System
    Pivoting tub cover assembly Pivoting tub cover assembly
  • Tub Cover Description
    Hydraulically activated Hydraulically activated
  • Tub Cover Positions
    2 2
  • Rotor Deflector
    Standard Standard
  • Falling Object Protection at Control Station
    Overhead and side protection Overhead and side protection
  • Drum Diameter
    22.5 in 57.2 cm
  • Tip Diameter
    28.6 in 72.6 cm
  • Drum Cutting Width
    46 in 116.8 cm
  • Drum Skin Thickness
    1.8 in 4.4 cm
  • Drum Speed
    1785 rpm 1785 rpm
  • Bearing Type
    spherical roller spherical roller
  • Number of Hammers
    8 8
  • Number of Cutters
    16 16
  • Cutter Block Types
    Block style single bolt wide 3" x 3.5" (7.6 cm x 8.9 cm) wide; 2-bolt 2" x 3" (5.1 cm x 7. 6 cm) narrow Block style single bolt wide 3" x 3.5" (7.6 cm x 8.9 cm) wide; 2-bolt 2" x 3" (5.1 cm x 7. 6 cm) narrow
  • Center Retention Pin Dimensions
    2" (5.1 cm) 2" (5.1 cm)
  • Number of Wipers
    2 2
  • Screen Weight
    400 lbs 181.4 kg
  • Screen Dimensions
    49.5" x 28.5" x 14.9" (126 cm x 72.4 cm x 37.8 cm) 49.5" x 28.5" x 14.9" (126 cm x 72.4 cm x 37.8 cm)
  • Screen Type
    Fabricated from abrasion resistant steel (qty 2) Fabricated from abrasion resistant steel (qty 2)
  • Breaker Bar Type
    T1 steel, replaceable T1 steel, replaceable
  • Breaker Bar Dimensions
    2.5" x 3" (6.4 cm x 7.6 cm) 2.5" x 3" (6.4 cm x 7.6 cm)
  • Screen Area
    2714 sq in 17509.6 sq cm
  • Distance - Screen to Millbox Wall
    11 in 27.9 cm
  • Length
    24 ft 7.3 m
  • Width
    36 in 91.4 cm
  • Belt Design
    One piece, 330# with V-cleat One piece, 330# with V-cleat
  • Splice
    Flexco R2 stainless steel Flexco R2 stainless steel
  • Return Roller Quantity
    5 standard and 1 vibrating roller 5 standard and 1 vibrating roller
  • Idler Roller Diameter
    8 in 20.3 cm
  • Standard Drive Roller Diameter
    12.8 in 32.5 cm
  • Magnetic Drive Roller Diameter
    12.8 in 32.5 cm
  • Drive Motor
    Geroler Geroler
  • Belt Speed
    640 ft/min 195.1 m/min
  • Load Height
    14 ft 4.3 m
  • Tank capacity
    95 gal 359.6 L
  • Recommended Oil
    Hy-Power 68 Hy-Power 68
  • Filtration Method
    In-tank return filters (qty 2) In-tank return filters (qty 2)
  • Number of Coolers
    1 1
  • System Type
    Open loop Open loop
  • Pump Type
    Gear Gear
  • Pump Flow at Maximum RPM
    19.2 gpm 72.7 L/min
  • System relief pressure
    2800 psi 193.1 bar
  • System Type
    Open loop Open loop
  • Pump Type
    Gear Gear
  • Pump Flow at Maximum RPM
    19.2 gpm 72.7 L/min
  • System relief pressure
    2800 psi 193.1 bar
  • System Voltage
    24 VDC 24 VDC
  • System Protection
    Fused Fused
  • Display Type
    Analog hydraulic gauges, LCD multifunction Analog hydraulic gauges, LCD multifunction
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Gauges
    Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure
  • Switches
    Moisture proof, toggle switch Moisture proof, toggle switch
  • Display Type
    LCD multifunction LCD multifunction
  • Engine Information
    Motor start/stop Motor start/stop
  • Motor Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Switches
    Sealed membrane Sealed membrane
  • Operating Range
    300' (91.4 m) 300' (91.4 m)
  • Battery Type
    AA (qty 6) AA (qty 6)
  • Channel Setting
    50 channels 50 channels
  • Frame Description
    Continuous I-beam Continuous I-beam
  • Screens
    Optional Optional
  • Special Tools Group
    Optional Optional
  • Special Paint
    Optional Optional
  • Extended Warranty
    Optional Optional
  • Preventative Maintenance
    Optional Optional