Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Maximum Length - Transport with Dolly
    45.8 ft 14 m
  • Maximum Length (Operation)
    54.5 ft 16.6 m
  • Maximum Width Transport - with Dolly
    9.8 ft 3 m
  • Weight
    56000 lbs 25401.2 kg
  • Tongue Weight - Engine Option 1 with Dolly
    21600 lbs 9797.6 kg
  • Axle Weight - Engine Option 1 with Dolly
    43400 lbs 19685.9 kg
  • Dolly Weight
    9500 lbs 4309.1 kg
  • Weight
    55500 lbs 25174.4 kg
  • Rear Pad Weight
    31600 lbs 14333.5 kg
  • Front Pad Weight
    23900 lbs 10840.9 kg
  • Manufacturer
    WEG W22 WEG W22
  • Frame
    145T 145T
  • Horsepower
    2 hp 1.5 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1750 rpm 1750 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    2.61 2.61
  • Locked Rotor Amps
    19.6 19.6
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    5.9 ft-lb 8 Nm
  • Locked Rotor (%)
    240 240
  • Break Down
    300 300
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    86.5 86.5
  • Power Factor
    .84 .84
  • Approximate Weight
    51 lbs 23.1 kg
  • Added Items
    Terminal Block Terminal Block
  • Manufacturer
    WEG W22 WEG W22
  • Frame
    364/5TS 364/5TS
  • Horsepower
    60 hp 44.7 kw
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1775 rpm 1775 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    68.3 68.3
  • Locked Rotor Amps
    451 451
  • Service Factor
    1.25 1.25
  • Duty Cycle
    S1 S1
  • NEMA Design
    B B
  • Insulation Class
    F F
  • Full Load Torque
    175 ft-lb 237.3 Nm
  • Locked Rotor (%)
    240 240
  • Break Down
    260 260
  • Ambient Temperature
    40 c 1352 f
  • Nominal Efficiency
    95 95
  • Power Factor
    .87 .87
  • Approximate Weight
    869 lbs 394.2 kg
  • Added Items
    Nema C Face Mount, Terminal Block Nema C Face Mount, Terminal Block
  • Manufacturer
    WEG W22 WEG W22
  • Frame
    NEMA 586/7Z NEMA 586/7Z
  • Voltage
    460 460
  • Frequency
    60 60
  • Phase
    3 3
  • Rated Speed
    1790 rpm 1790 rpm
  • Enclosure
    TEFC TEFC
  • Full Load Amps
    401 401
  • Locked Rotor Amps
    2390 2390
  • Service Factor
    1.15 1.15
  • Duty Cycle
    S1 S1
  • NEMA Design
    NEMA A NEMA A
  • Insulation Class
    F F
  • Full Load Torque
    1373 ft-lb 1861.5 Nm
  • Locked Rotor (%)
    220 220
  • Break Down
    260 260
  • Ambient Temperature
    4 c 135.2 f
  • Nominal Efficiency
    95.8 95.8
  • Power Factor
    .85 .85
  • Approximate Weight
    3363 lbs 1525.4 kg
  • Added Items
    Temperature switch; Inverter duty; Terminal Block Temperature switch; Inverter duty; Terminal Block
  • Drive Belt Type
    Synchronous, carbon fiber Synchronous, carbon fiber
  • Height
    87.4 in 222 cm
  • Width
    158 in 401.3 cm
  • Depth
    24.1 in 61.2 cm
  • Weight
    4100 lbs 1859.7 kg
  • Feed Table Width
    60 in 152.4 cm
  • Feed Table Length - Option One
    20 ft 6.1 m
  • Loading Height
    7.6 ft 2.3 m
  • Flare Construction
    Integrated with infeed Integrated with infeed
  • Feed Conveyor Type
    Welded slat chain Welded slat chain
  • Material Construction
    Steel Steel
  • Drive Type
    Radial piston motor Radial piston motor
  • Drive Roller Construction
    Welded steel Welded steel
  • Front Idler Roller Construction
    Self-cleaning steel auger Self-cleaning steel auger
  • Infeed Floor Construction
    Welded steel with replaceable UHMW wear plates Welded steel with replaceable UHMW wear plates
  • Infeed Roller Width
    56.8 in 144.3 cm
  • Infeed Roller Weight
    1300 lbs 589.7 kg
  • Infeed Roller Diameter
    36.1 in 91.8 cm
  • Maximum Feed Height
    32 in 81.3 cm
  • Material Type
    Fabricated steel Fabricated steel
  • Tooth Design
    Serrated bars Serrated bars
  • Number of Teeth
    13 bars 13 bars
  • Drive Motor
    Fixed displacement, Geroler Fixed displacement, Geroler
  • Drive Planetary
    Two options (HD - 26.18:1) (STD - 34.2:1) Two options (HD - 26.18:1) (STD - 34.2:1)
  • Feed Roller Down Pressure
    Adjustable Adjustable
  • Thrown Object Deflector
    Standard Standard
  • Deflector Position
    Variable Variable
  • Millbox Opening
    60" W x 32" H (152.4 cm W x 81.3 cm H) 60" W x 32" H (152.4 cm W x 81.3 cm H)
  • Drum Diameter
    5600 in 14224 cm
  • Tip Diameter
    28 in 71.1 cm
  • Drum Cutting Width
    36.4 in 92.5 cm
  • Drum Skin Thickness
    62.4 in 158.5 cm
  • Drum Speed
    1.5 rpm 1.5 rpm
  • Tip Speed
    1080 rpm 1080 rpm
  • Bearing Type
    Double row, spherical roller Double row, spherical roller
  • Bearing - Inner Race Diameter
    5.5 in 14 cm
  • Number of Hammers
    10 10
  • Number of Tips
    20 20
  • Center Retention Pin Dimensions
    2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L)
  • Screen Weight
    470 lbs 213.2 kg
  • Screen Dimensions
    3/4" (1.9 cm) thick 3/4" (1.9 cm) thick
  • Screen Type
    Fabricated out of abrasion resistant steel Fabricated out of abrasion resistant steel
  • Number of Screens
    2 2
  • Screen Area
    3317 sq in 21400 sq cm
  • Number of Sides
    1 1
  • Millbox Lid Liner Dimensions
    Abrasion resistant steel Abrasion resistant steel
  • Liner Dimensions
    1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L)
  • Anvil Type
    Fabricated steel with replaceable wear surfaces Fabricated steel with replaceable wear surfaces
  • Anvil Dimensions
    22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm)
  • Length
    81.3 ft 24.8 m
  • Width
    48 in 121.9 cm
  • Belt Design
    3 ply - 330# or straight warp single ply 330# both with V cleat 3 ply - 330# or straight warp single ply 330# both with V cleat
  • Splice
    R2-stainless steel or Super splice R2-stainless steel or Super splice
  • Return Roller Quantity
    3 3
  • Idler Roller Diameter
    12 in 30.5 cm
  • Idler Roller Bearing
    1-15/16, 4-bolt flange 1-15/16, 4-bolt flange
  • Standard Drive Roller Diameter
    12.8 in 32.4 cm
  • Magnetic Drive Roller Diameter
    12.8 in 32.4 cm
  • Drive Motor
    Fixed displacement, Geroler Fixed displacement, Geroler
  • Drive Motor Bearings
    1-15/16, 4-bolt flange 1-15/16, 4-bolt flange
  • Belt Speed
    780 ft/min 237.7 m/min
  • Load Height
    14.5 ft 4.4 m
  • Tank capacity
    65 gal 246.1 L
  • Recommended Oil
    Vermeer HyPower 68 Vermeer HyPower 68
  • Filtration Method
    Dual in-tank return filters with suction strainer Dual in-tank return filters with suction strainer
  • Number of Coolers
    1 1
  • System Type
    Open-loop, pressure- and flow-compensated Open-loop, pressure- and flow-compensated
  • Pump Type
    Variable displacement, axial piston Variable displacement, axial piston
  • Pump Flow at Maximum RPM
    28.5/27.3 (60Hz/50Hz) 28.5/27.3 (60Hz/50Hz)
  • System Relief Pressure
    4500 4500
  • System Type
    Open-loop Open-loop
  • Pump Type
    Fixed displacement, gear pump Fixed displacement, gear pump
  • Pump Flow at Maximum RPM
    23 gpm 87.1 L/min
  • System Relief Pressure
    3000 3000
  • Motor Series
    Char-Lyn 6000 Series, geroler Char-Lyn 6000 Series, geroler
  • System Voltage
    24V Machine Control Circuit 24V Machine Control Circuit
  • System Protection
    Fused Fused
  • Display Type
    LCD LCD
  • Engine Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Switches
    Moisture-proof, toggle style Moisture-proof, toggle style
  • Display Type
    LCD LCD
  • Engine Information
    Yes Yes
  • Machine Information
    Yes Yes
  • Operational Faults
    Yes Yes
  • Switches
    Sealed membrane Sealed membrane
  • Operating Range
    Up to 300' (91.4 m) Up to 300' (91.4 m)
  • Battery Type
    AA (qty 6) AA (qty 6)
  • Channel Setting
    50 channels 50 channels
  • Frame Description
    Unit body construction Unit body construction
  • Tongue Description
    Bolt-on to infeed structure Bolt-on to infeed structure
  • Hitch Type
    Fifth wheel Fifth wheel
  • Fender Description
    Formed steel, Replaceable Formed steel, Replaceable
  • Brake Type
    Air-actuated with spring-applied parking brake Air-actuated with spring-applied parking brake
  • Trailer Light Type
    12-24 V LED 12-24 V LED
  • Suspension Type
    Air-ride Air-ride
  • Manufacturer - Option One
    Hendrickson Hendrickson
  • Capacity per Axle
    20000 lbs 9071.8 kg
  • Number of Axles
    3 3
  • Tires - Option One
    255/70R22.5 Duals 255/70R22.5 Duals
  • Wheels - Option One
    22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel
  • Ground Clearance - Option One
    5.3 in 13.5 cm
  • Air Compressor Brand
    Mi-T-M Mi-T-M
  • Maximum Pressure
    175 psi 12.1 bar
  • Maximum Air Flow
    29 cfm .8 cmm
  • Tank capacity
    30 gal 113.6 L
  • Screens
    Yes Yes
  • Special Tools Group
    Yes Yes
  • Extended Warranty
    Yes Yes
  • Preventative Maintenance
    Optional Optional
  • Special Paint
    Yes Yes