Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Length - Feed Table Up, Tongue In
    140.4 in 356.6 cm
  • Length - Table Down, Tongue Extended
    154.8 in 393.2 cm
  • Width
    79.5 in 201.9 cm
  • Height
    97 in 246.4 cm
  • Weight - Engine Option One
    3060 lbs 1388 kg
  • Tongue Weight - Engine Option One
    320 lbs 145.1 kg
  • Make and Model
    Briggs and Stratton Vanguard Briggs and Stratton Vanguard
  • Gross Horsepower (Maximum)
    35 hp 26.1 kw
  • Torque (Max)
    53 ft-lb 71.9 Nm
  • Fuel Tank Capacity
    16 gal 60.6 L
  • Max Fuel Consumption
    3.2 gph 12.1 lph
  • Fuel Type
    Gasoline Gasoline
  • Air Cleaner
    Engine-mounted Engine-mounted
  • Oil Filter
    Spin-On Spin-On
  • Recommended Oil
    10W30 10W30
  • Oil Volume with Filter
    2.9 qt 2.7 L
  • Cooling Medium
    Air Air
  • Alternator
    20 amp 20 amp
  • Clutch Drive Engagement
    Clutchless PTO Clutchless PTO
  • Feed Roller Orientation
    Horizontal Horizontal
  • Number of Feed Rollers
    1 1
  • Feed Roller Clamp Load
    560 lbs 254 kg
  • Feed Roller Clamp Type
    Spring/weight Spring/weight
  • Feed Roller Dimension
    15.8" dia x 13.5" long (40 cm x 34.3 cm) 15.8" dia x 13.5" long (40 cm x 34.3 cm)
  • Number of Knives
    12 12
  • Weight of Feed Roller
    210 lbs 95.3 kg
  • Number of Feed Roller Motors
    1 1
  • Motor Displacement
    33.1 CID 33.1 CID
  • Motor Manufacturer
    White White
  • Feed Speed
    140 ft/min 140 ft/min
  • Infeed Table Width
    48 in 121.9 cm
  • Infeed Table Length
    26 in 66 cm
  • Infeed Hopper Height
    32 in 81.3 cm
  • Infeed Throat Capacity
    9 in x 14 in (22.9 cm x 35.6 cm) 9 in x 14 in (22.9 cm x 35.6 cm)
  • Pinch Point - Distance to End of Feed Table
    65 in 165.1 cm
  • Distance from Feed Table to Ground
    29 in 73.7 cm
  • Infeed Table Material Thickness
    .2 in .5 cm
  • Bottom Feed Stop Bar
    Standard Standard
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Bottom Feed Stop Bar Material Thickness
    11 GA 11 GA
  • Actuation Force (BFSB)
    34 lbs 15.4 kg
  • Normal Sensitivity
    22 deg 22 deg
  • Reduced Sensitivity
    12 deg 12 deg
  • Reset Method
    Dual green hold-to-run buttons Dual green hold-to-run buttons
  • Four Position Feed Control Bar
    Standard Standard
  • Diameter
    2 in 5.1 cm
  • Material Thickness
    .1 in .3 cm
  • Positions
    Four positions: Emergency stop, forward, stop and reverse Four positions: Emergency stop, forward, stop and reverse
  • Green Hold to Run Button
    Standard Standard
  • Material Capacity
    9 in 22.9 cm
  • Thickness
    1 in 2.5 cm
  • Diameter
    33 in 83.8 cm
  • Speed
    1500 rpm 1500 rpm
  • Weight With Shaft
    330 lbs 149.7 kg
  • Safety Lock - Number of Positions
    6 6
  • Number of Knives
    2 2
  • Knife Thickness
    .6 in 1.6 cm
  • Material
    A8 chipper steel A8 chipper steel
  • Useable Edges
    2 2
  • Knife Size
    5" x 11.75" (12.7 cm x 29.8 cm) 5" x 11.75" (12.7 cm x 29.8 cm)
  • Number of Bolts/Knife
    5 5
  • Replaceable Threaded Knife Block
    Yes Yes
  • Number of Paddles
    2 2
  • Fixture Method
    Bolt-on Bolt-on
  • Air Flow
    3925 cfm 3925 cfm
  • Bedknife Size
    5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical
  • Bedknife Thickness
    .8 in 1.9 cm
  • Bedknife Material
    Grade 50 Grade 50
  • Bedknife - Number of Useable Edges
    2 2
  • Number of Bearings
    2 2
  • Bore
    2.2 in 5.6 cm
  • Type
    Dual spherical roller Dual spherical roller
  • Manufacturer
    Linkbelt Linkbelt
  • Dynamic Capacity
    31400 lbs 14242.8 kg
  • Static Capacity
    53500 lbs 24267.2 kg
  • Belt Idler/Tensioner
    Yes Yes
  • Belt Type
    Chipper - Polyester Cord with wrap Chipper - Polyester Cord with wrap
  • Chute Height
    96.7 in 245.6 cm
  • Bottom Thickness
    .1 in .2 cm
  • Top Thickness
    .1 in .3 cm
  • Side Wall Thickness
    .1 in .3 cm
  • Deflector Thickness
    .1 in .3 cm
  • Chute Rotation Angle
    270 deg 270 deg
  • Rotation Type
    Manual dual handles with pin lock Manual dual handles with pin lock
  • Rotational Lock
    Yes Yes
  • Tank capacity
    6.8 gal 25.7 L
  • Recommended Oil Type
    Vermeer VMF Gold Vermeer VMF Gold
  • System Type
    Tandem Center Tandem Center
  • Filtration Method
    10 micron return 10 micron return
  • Pump Flow at Maximum RPM
    5 gpm 18.9 L/min
  • System relief pressure
    2500 psi 172.4 bar
  • Auto Reverse PSI
    2300 psi 158.6 bar
  • System Voltage
    12 V 12 V
  • Battery
    Group 24 - 580 CCA Group 24 - 580 CCA
  • Standard Gauges
    Hour meter Hour meter
  • Controller
    Vermeer ACS Vermeer ACS
  • Shutdown System
    Engine Engine
  • Frame Description
    3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm) 3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm)
  • Tongue Description
    3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
  • Hitch Type
    Pintle or ball Pintle or ball
  • Fender Description
    Bolt-on Bolt-on
  • Axle/Suspension
    3500 lb (1587.6 kg) 3500 lb (1587.6 kg)
  • Type - Option One
    Rubber torsional Rubber torsional
  • Manufacturer - Option One
    Dexter Dexter
  • Capacity - Option One
    3500 (1587.6 kg) 3500 (1587.6 kg)
  • Tires - Option One
    ST215/75R14 ST215/75R14
  • Wheels - Option One
    14" (35.6 cm) 14" (35.6 cm)
  • Axle/Suspension - Option Two
    3500 lb (1587.6 kg) with electric brakes 3500 lb (1587.6 kg) with electric brakes
  • Type - Option Two
    Rubber torsional Rubber torsional
  • Manufacturer - Option Two
    Dexter Dexter
  • Special Paint
    Yes Yes
  • Extended Warranty
    Yes Yes
  • Preventive Maintenance
    Yes Yes
  • See Product