Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

  • Length - Feed Table Up, Tongue In
    113 in 287 cm
  • Length - Table Down, Tongue Extended
    133 in 337.8 cm
  • Width
    71 in 180.3 cm
  • Height
    102 in 259.1 cm
  • Weight - Engine Option One
    1800 lbs 816.5 kg
  • Tongue Weight - Engine Option One
    180 lbs 81.6 kg
  • Make and Model
    Kohler ECH740 Kohler ECH740
  • Gross Horsepower (Maximum)
    25 hp 18.6 kw
  • Torque (Max)
    41.7 ft-lb 56.5 Nm
  • Fuel Tank Capacity
    6 gal 22.7 L
  • Max Fuel Consumption
    2.4 gph 9.1 lph
  • Fuel Type
    Gasoline Gasoline
  • Air Cleaner
    Kohler HD 2-Stage Dry Kohler HD 2-Stage Dry
  • Oil Filter
    Spin-on Spin-on
  • Recommended Oil
    Kohler oil or API CH4/SJ Kohler oil or API CH4/SJ
  • Oil Volume with Filter
    2 qt 1.9 L
  • Maximum Angle of Continuous Operation
    25 deg 25 deg
  • Cooling Medium
    Oil/Air Oil/Air
  • Alternator
    20A Charging 20A Charging
  • Clutch Type
    Centrifugal PTO Centrifugal PTO
  • Clutch Drive Engagement
    Centrifugal Centrifugal
  • Feed Roller Orientation
    Horizontal Horizontal
  • Feed Roller Clamp Load
    525 lbs 238.1 kg
  • Feed Roller Clamp Type
    Spring/Feed Roller Weight Spring/Feed Roller Weight
  • Feed Roller Minimum Distance to Drum
    4 in 10.2 cm
  • Feed Roller Dimension
    10" Diameter 10" Diameter
  • Weight of Feed Roller
    100 lbs 45.4 kg
  • Motor Displacement
    14 14
  • Motor Manufacturer
    White Hydraulics White Hydraulics
  • Feed Speed
    49.4 ft/min 49.4 ft/min
  • Infeed Table Width
    41.2 in 104.6 cm
  • Infeed Table Length
    30.2 in 76.7 cm
  • Infeed Hopper Height
    22.1 in 56.1 cm
  • Infeed Throat Capacity
    6" x 8" (15.24 cm x 20.32 cm) 6" x 8" (15.24 cm x 20.32 cm)
  • Pinch Point - Distance to End of Feed Table
    65.4 in 166.1 cm
  • Distance from Feed Table to Ground
    28.1 in 71.4 cm
  • Bottom Feed Stop Bar
    Standard Standard
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Bottom Feed Stop Bar Material Thickness
    12" (30.48 cm) 12" (30.48 cm)
  • Reset Method
    Dual green hold-to-run buttons Dual green hold-to-run buttons
  • Four Position Feed Control Bar
    Standard Standard
  • Diameter
    2 in 5.1 cm
  • Material Thickness
    .1 in .3 cm
  • Positions
    Four position: (E-Stop), Forward, Stop, (Reverse) Four position: (E-Stop), Forward, Stop, (Reverse)
  • Green Hold to Run Button
    Standard Standard
  • Material Capacity
    6 in 15.2 cm
  • Width
    8 in 20.3 cm
  • Thickness
    1.3 in 3.2 cm
  • Diameter
    23.9 in 60.7 cm
  • Speed
    1748 1748
  • Weight With Shaft
    176 lbs 79.8 kg
  • Knife Thickness
    .6 in 1.6 cm
  • Material
    A8 Chipper Steel A8 Chipper Steel
  • Replaceable Threaded Knife Block
    Yes Yes
  • Fixture Method
    Welded Welded
  • Air Flow
    5000 cfm 5000 cfm
  • Bedknife Size
    4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert
  • Bedknife Material
    ASTM A572 Grade 50 ASTM A572 Grade 50
  • Bore
    1.5 in 3.8 cm
  • Type
    Flange-mounted ball type, self-aligning Flange-mounted ball type, self-aligning
  • Manufacturer
    Linkbelt Linkbelt
  • Dynamic Capacity
    5640 lbs 2558.3 kg
  • Static Capacity
    4460 lbs 2023 kg
  • Belt Idler/Tensioner
    Spring-loaded adjustable Idler Spring-loaded adjustable Idler
  • Belt Type
    2-band 5-V profile Aramid 2-band 5-V profile Aramid
  • Chute Height
    97.2 in 246.8 cm
  • Bottom Thickness
    .1 in .3 cm
  • Top Thickness
    .1 in .3 cm
  • Side Wall Thickness
    .1 in .3 cm
  • Deflector Thickness
    .1 in .2 cm
  • Chute Rotation Angle
    240 deg 240 deg
  • Rotation Type
    Manual Manual
  • Rotational Lock
    Standard Latch Standard Latch
  • Tank capacity
    6.8 gal 25.7 L
  • Recommended Oil Type
    Vermeer VMF Gold Vermeer VMF Gold
  • System Type
    Open center Open center
  • Filtration Method
    Return flow filtration, 10 micron Return flow filtration, 10 micron
  • Pump Flow at Maximum RPM
    3.8 gpm 14.4 L/min
  • System relief pressure
    2500 psi 172.4 bar
  • System Voltage
    12 Volt 12 Volt
  • Battery
    Group 26, 400 CCA Group 26, 400 CCA
  • Standard Gauges
    Hour meter Hour meter
  • Switches
    Hold-to-run, sensitivity selector Hold-to-run, sensitivity selector
  • Controller
    Vermeer ACS CB02 Vermeer ACS CB02
  • Frame Description
    3/16"/(.5 cm) ASTM A1011 steel 3/16"/(.5 cm) ASTM A1011 steel
  • Hitch Type
    2"/(5.1 cm) ball coupler 2"/(5.1 cm) ball coupler
  • Fender Description
    .1"/(.3 cm) Steel bolt-on .1"/(.3 cm) Steel bolt-on
  • Axle/Suspension
    2000 lb/(907.2 kg) rubber torsion axle 2000 lb/(907.2 kg) rubber torsion axle
  • Type - Option One
    Rubber Torsional Rubber Torsional
  • Manufacturer - Option One
    Dexter Dexter
  • Capacity - Option One
    2000 lb/(907.2 kg) 2000 lb/(907.2 kg)
  • Tires - Option One
    ST185/80D13 load range D ST185/80D13 load range D
  • Wheels - Option One
    13 x 5, bolt circle 5 on 4.5 13 x 5, bolt circle 5 on 4.5
  • Axle/Suspension - Option Two
    2000lb/(907.2 kg) rubber torsion axle with electric brakes 2000lb/(907.2 kg) rubber torsion axle with electric brakes
  • Type - Option Two
    Rubber torsional, braked Rubber torsional, braked
  • Manufacturer - Option Two
    Dexter Dexter
  • Capacity - Option Two
    2000 lb/(907.2 kg) 2000 lb/(907.2 kg)
  • Brake Type
    Electric optional Electric optional
  • Trailer Light Type
    LED LED
  • Special Paint
    Available, Optional Available, Optional
  • Extended Warranty
    Available, Optional Available, Optional
  • Preventive Maintenance
    Available, Optional Available, Optional
  • See Product