Compare

Compare up to 4 products at a time below. Swipe left and right to reveal more information.

Show Metric
  • Length - Feed Table Up, Tongue In
    113 in 287 cm
  • Length - Table Down, Tongue Extended
    133 in 337.8 cm
  • Width
    71 in 180.3 cm
  • Height
    102 in 259.1 cm
  • Weight (without winch and hydraulic jack)
    1800 lbs 816.5 kg
  • Weight - Engine Option One
    1800 lbs 816.5 kg
  • Make and Model
    Perkins 403D-11 Perkins 403D-11
  • Number of Cylinders
    3 3
  • Gross Horsepower (Maximum)
    25 hp 18.6 kw
  • Torque (Max)
    49.3 ft-lb 66.8 Nm
  • Fuel Tank Capacity
    6 gal 22.7 L
  • Fuel Type
    Diesel Diesel
  • Recommended Oil
    API CH4/SJ /ACEA E5 API CH4/SJ /ACEA E5
  • Make and Model
    Kohler ECH740 Kohler ECH740
  • Number of Cylinders
    2 2
  • Gross Horsepower (Maximum)
    25 hp 18.6 kw
  • Torque (Max)
    41.7 ft-lb 56.5 Nm
  • Fuel Tank Capacity
    6 gal 22.7 L
  • Fuel Type
    Gasoline Gasoline
  • Recommended Oil
    Kohler Oil or API CH4/SJ Kohler Oil or API CH4/SJ
  • Feed Roller Orientation
    Horizontal Horizontal
  • Number of Feed Rollers
    1 1
  • Feed Roller Clamp Load
    525 lbs 238.1 kg
  • Feed Roller Clamp Type
    Spring/feed roller weight Spring/feed roller weight
  • Feed Roller Minimum Distance to Drum
    4 in 10.2 cm
  • Feed Roller Dimension
    10 in (25.4 cm) 10 in (25.4 cm)
  • Number of Knives
    2 2
  • Weight of Feed Roller
    100 lbs 45.4 kg
  • Number of Knives (2)
    2 2
  • Number of Feed Roller Motors
    1 1
  • Motor Displacement
    14.2 14.2
  • Motor Manufacturer
    White Hydraulics White Hydraulics
  • Feed Speed
    49.4 ft/min 49.4 ft/min
  • Infeed Table Width
    41.2 in 104.6 cm
  • Infeed Table Length
    30.2 in 76.7 cm
  • Infeed Hopper Height
    22.1 in 56.1 cm
  • Infeed Throat Capacity
    6 in x 8 in (15.2 cm x 20.3 cm) 6 in x 8 in (15.2 cm x 20.3 cm)
  • Pinch Point - Distance to End of Feed Table
    65.4 in 166.1 cm
  • Distance from Feed Table to Ground
    28.1 in 71.4 cm
  • Bottom Feed Stop Bar
    Standard Standard
  • Bottom Feed Stop Bar Diameter
    2 in 5.1 cm
  • Bottom Feed Stop Bar Material Thickness
    12 in (30.48 cm) 12 in (30.48 cm)
  • Reset Method
    Dual green hold-to-run buttons Dual green hold-to-run buttons
  • Four Position Feed Control Bar
    Standard Standard
  • Diameter
    2 in 5.1 cm
  • Material Thickness
    .1 in .3 cm
  • Positions
    Four position: E-stop, Forward, Stop, Reverse Four position: E-stop, Forward, Stop, Reverse
  • Green Hold to Run Button
    Standard Standard
  • Material Capacity
    6 in 15.2 cm
  • Width
    8 in 20.3 cm
  • Thickness
    1.3 in 3.2 cm
  • Diameter
    23.9 in 60.7 cm
  • Speed
    1748 rpm 1748 rpm
  • Weight With Shaft
    176 lbs 79.8 kg
  • Safety Lock - Number of Positions
    2 2
  • Number of Knives
    2 2
  • Knife Thickness
    .6 in 1.5 cm
  • Material
    A8 chipper steel A8 chipper steel
  • Useable Edges
    2 2
  • Replaceable Threaded Knife Block
    Yes Yes
  • Fixture Method
    Welded Welded
  • Air Flow
    5000 cfm 5000 cfm
  • Bedknife Size
    Horizontal: 4 in x 8.6 in (10.2 cm x 21.9 cm); Vertical: 4 in x 5.8 in (10.2 cm x 14.6 cm) Horizontal: 4 in x 8.6 in (10.2 cm x 21.9 cm); Vertical: 4 in x 5.8 in (10.2 cm x 14.6 cm)
  • Bedknife Material
    ASTM A572 Grade 50 ASTM A572 Grade 50
  • Number of Bearings
    2 2
  • Bore
    1.5 in 3.8 cm
  • Type
    Flange-mounted ball type, self-aligning Flange-mounted ball type, self-aligning
  • Manufacturer
    Linkbelt Linkbelt
  • Dynamic Capacity
    5640 lbs 2558.3 kg
  • Static Capacity
    4460 lbs 2023 kg
  • Belt Idler/Tensioner
    Spring-loaded adjustable idler Spring-loaded adjustable idler
  • Belt Type
    2-band 5-V profile Aramid 2-band 5-V profile Aramid
  • Chute Height
    97.2 in 246.9 cm
  • Bottom Thickness
    .1 in .3 cm
  • Top Thickness
    .1 in .3 cm
  • Side Wall Thickness
    .1 in .3 cm
  • Deflector Thickness
    .1 in .3 cm
  • Chute Rotation Angle
    270 deg 270 deg
  • Rotation Type
    Manual Manual
  • Rotational Lock
    Standard latch Standard latch
  • Tank capacity
    6.8 gal 25.7 L
  • Recommended Oil Type
    Vermeer VMF Gold Vermeer VMF Gold
  • System Type
    Open center Open center
  • Filtration Method
    Return flow filtration, 10 micron Return flow filtration, 10 micron
  • Pump Flow at Maximum RPM
    3.8 gpm 14.4 L/min
  • System relief pressure
    2500 psi 172.4 bar
  • System Voltage
    12 volt 12 volt
  • Battery
    Group 26, 400 CCA Group 26, 400 CCA
  • Standard Gauges
    Hour meter Hour meter
  • Switches
    Hold-to-run, sensitivity selector Hold-to-run, sensitivity selector
  • Controller
    Vermeer ACS CB02 Vermeer ACS CB02
  • Frame Description
    3/16 in (.5 cm) ASTM A1011 steel 3/16 in (.5 cm) ASTM A1011 steel
  • Hitch Type
    Pintle (o coupler) Pintle (o coupler)
  • Fender Description
    Steel bolt-on Steel bolt-on
  • Axle/Suspension
    Torsion axle Torsion axle
  • Capacity - Option One
    3307 lb (1500 kg) 3307 lb (1500 kg)
  • Tires - Option One
    185/70R13 185/70R13
  • Wheels - Option One
    4.5Jx13, ET=25 4.5Jx13, ET=25
  • Brake Type
    Parking brake only Parking brake only
  • Trailer Light Type
    LED LED