TR6400 Trommel Screen

The TR6400 trommel screen was designed with toughness, compactness and ease of maintenance in mind. The 100 hp (75 kW) Deutz Tier 4 Final engine, combined with a 6 ft (1.8 m) by 20 ft (6.1 m) drum is ideal for topsoil, compost and woody biomass applications.

Features and benefits

  • Duetz 3.6L Tier 4F (Stage IV) 100 hp (74.4 kW) engine - The Deutz 3.6L Tier 4F (Stage IV) engine meets all U.S., Canada and European Union tier/stage regulations.
  • Drum service access - A single large drum along the side and entry from the end provide superior drum service access.
  • Low hopper height - A lower hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.
  • Quick-change drum - Efficiently change product size by exchanging drums.
  • Quick-change screens - Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that requires frequent screen changes. The design also creates a smooth exterior to the drum, reducing the amount of brush wear.
  • Square lift bars - Square lift bars inside the drum enable more material to be carried at a slower drum speed, helping decrease fuel consumption and premature wear.
  • Swing-out engine bay - A single large access door provides service access.
  • Tensioned screens - Compatibility with smaller gauge wire increase the open screen area, thus overall production of the machine, particularly in applications when processing wetter materials. 
  • Vermeer ACS control system - These control systems offer the operator flexibility when operating from the machine or cab of the loader. Operators can also adjust conveyor height from the remote, providing the ability to keep them low to the ground to reduce blowing of material.
Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries © 2019 Vermeer Corporation. All Rights Reserved.
Weight 37000 lbs 16782.9 kg
Hitch Weight 4200 lbs 1905.1 kg
Transport Length 40 ft 12.2 m
Transport Width 99 in 251.5 cm
Transport Height 13.1 ft 4 m
Operation Length 54 ft 16.5 m
Operation Width 295 in 749.3 cm
Operation Height 16.7 ft 5.1 m
Capacity Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
Make and Model Deutz 3.6L Tier 4F (Stage IV)
Number of Cylinders 4
Engine Rating 100 hp (74.5 kW)
Fuel Tank Capacity 50 gal 189.3 L
Fuel Consumption 3 gph (11.4 L/h)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 30 deg
Battery 950 CCA
Oil Filter Spin-on
Recommended Oil Mobil 15W40
Oil Volume with Filter 10 qt 9.5 L
System Voltage 12 V, 120 amp alternator
Air Cleaner Dual element
Radiator Fan Suction
Operation 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar)
Tank capacity 80 gal 302.8 L
Frame Description Four independent hydraulic jacklegs
Axle/Suspension Leaf spring
Tires - Option One 445/50 R22.5
Hopper Capacity 6.5 cu yd 5 cu m
Hopper Bottom Width 37.5 in 95.3 cm
Apron Conveyor Speed 0-15 fpm
Apron Opening Height 45 in 114.3 cm
Apron Opening Width 37.5 in 95.3 cm
Hopper Height 9.5 in (42.1 cm) from ground level at operating incline
Hopper Opening 11.7 x 5.3 in (29.7 x 13.5 cm)
Apron Conveyor Length 12.4 ft 3.8 m
Apron Conveyor Belt Width 42 in 106.7 cm
Apron Conveyor Rollers 5 CEMA "D" x 17 in (12.7 x 43.2 cm)
Drum Operation 0-33.1 gpm (0-125.3 L/min)
Drum Motor 35.5 cu in (581.7 cu cm) displacement
Drum Diameter 6.5 ft 2 m
Drum Support Description 8 polyurethane trunnion wheels on pivoting bogeys 8 od x 4 in wide (20.3 x 10.2 cm)
Thrust Bearing Diameter 4 in 10.2 cm
Thrust Bearing Face 2 in 5.1 cm
Drum Speed 0-25 rpm
Drum Drive Chain 140 extended pin/extended width
Drum Angle Adjustability 0-5 deg
Maximum Screen Panels 8
Brush Diameter 14 in 35.6 cm
Bristle Material Polyethylene
Brush Assembly Support Two 1.25 in (3.2 cm) sealed ball bearings/brush
Collecting Conveyor Length 16 ft 4.9 m
Collecting Belt Speed 360 ft/min 109.7 m/min
Conveyor Belt Width 36 in 91.4 cm
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/6" x 1/16" (4.8 mm x 1.6 mm)
Head/Tail Pulley Type 8 in (20.3 cm) crowned
Head Pulley Bearing 1.75 in (4.4 cm) double roller
Rubber Flashing Adjustable corded rubber
Idler Type 4 in (10.2 cm) CEMA "B" straight
Tail Pulley Takeup 6 in 15.2 cm
Self-Cleaning Return Idlers 4 in (10.2 cm) rubber disk x 3
Fines Conveyor Frame Part of trailer frame
Conveyor Motor Displacement 14.2 cu-in 232.7 cu-cm
Fines Conveyor Length 23.5 ft 7.2 m
Fines Belt Speed 400 ft/min 121.9 m/min
Conveyor Belt Width 36 in 91.4 cm
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/16 x 1/16 in (4.8 mm x 1.6 mm) smooth
Conveyor Belt Stacking Height 10.5 ft (3.2 m) (conveyor @ 30 deg)
Head Pulley Type 8 in (20.3 cm) crowned
Head Pulley Bearing 1.5 in (3.8 cm) pillow block
Troughing Idler Type 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers
Self-Cleaning Tail Pulley Dimensions 8 in diameter, 38 in wide, crowned wing pully
Head Pulley Takeup 8 in 20.3 cm
Self-Cleaning Return Idlers 2, 4 in (10.2 cm) diameter; 1, 5 in (12.7 cm) diameter, "rattle roller"
Fines Conveyor Frame Engineered structural frame
Overs Conveyor Length 19.2 ft 5.9 m
Maximum Variable Overs Belt Speed 360 ft/min 109.7 m/min
Conveyor Belt Size 42 in (106.7 cm)
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/16 x 1/16 in (4.8 x 1.6 mm) cleated
Conveyor Belt Stacking Height 9 ft (2.7 m) (conveyor @ 25 deg)
Head Pulley Type 8 in (20.3 cm) crowned
Head Pulley Bearing 1.5 in (3.8 cm) pillow block
Self-Cleaning Tail Pulley Dimensions 8 in (20.3 cm) diameter, 44 in (111.8 cm) wide, crowned wing pulley, 1.75 in (4.4 cm) shaft
Head Pulley Takeup 8 in 20.3 cm
Self-Cleaning Return Idlers 2, 4 in (10.2 cm) diameter; 1, 5 in (12.7 cm) diameter, "rattle roller"
Overs Conveyor Frame Engineered structural frame
Troughing Idler Type 20 degrees CEMA "B" with permanently sealed bearings spaced at 32-in centers
Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries © 2019 Vermeer Corporation. All Rights Reserved.

Videos

Features and benefits of the T6400 trommel screen

The TR6400 trommel screen was designed with toughness, compactness and ease of maintenance in mind.

Images

TR6400 Trommel Screen in Action

This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.