TR620 Trommel Screen

The TR620 trommel screen is built with the toughness you expect from Vermeer, packaged in a compact design to meet your jobsite needs. The tension screen and drum are designed for optimum productivity, offering simple adjustments and maintenance. Combined with the flexibility to produce three products with an optional conveyor, the TR620 offers simplicity and versatility with a reduced footprint.

Features and benefits

  • With the flexibility to choose an optional three-conveyor configuration, the TR620 allows you to extract three unique products from the incoming material.
  • A Cummins QSB 3.3l Tier4i (Stage IIIB), 120 hp (90 kW) engine is mounted on a pivoting frame that swings out 30 degrees for superior access to fuel filters and hydraulic reservoir for maintenance and service.
  • With the ability to tension the screen around the drum, operators can add rigidity to the screens. This design allows the user of smaller gauge wire, ultimately increasing the open area of the screen to help improve productivity.
  • Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a hand-held transceiver remote. From either control, the operator can choose from four programmable presets or adjust on the fly based on incoming material.
  • A single-hinged side panel exposes the full length of the trommel drum from ground level for drum service and removal.
  • A hydraulic chain drive system allows the drum to lift off the cog for service, and bolt-on sprockets can be changed quickly and help lower repair costs.
Weight 37440 lbs 16982.5 kg
Weight with third product conveyor 40000 lbs 18143.7 kg
Hitch Weight 4205 lbs 1907.4 kg
Hitch weight with third product conveyor 5300 lbs 2404 kg
Transport Length 39.5 ' 12 m
Transport Width 111 " 281.9 cm
Transport width with third product conveyor 9.3 lbs 4.2 kg
Transport Height 12.5 ' 3.8 m
Operation Length 54.2 ' 16.5 m
Operation Width 274.8 " 698 cm
Operation width with third product conveyor 454.8 " 1155.2 cm
Operation Height 12 ' 3.7 m
Capacity 180 cu yd (137.6 cu m) per hour with 0.5" (1.3 cm) screens installed and material with moisture less than 40%
Make and Model Cummins QSB 3.8l Tier 4F
Number of Cylinders 4
Engine Rating 120 hp
Fuel Tank Capacity 73 gal 276.3 L
Fuel Consumption 3.1 gph (11.7 Lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 30 deg
Battery 950 CCA
Oil Filter Spin-on
Recommended Oil Mobil 15W40
Oil Volume with Filter 11.8 qt 11.2 L
System Voltage 12 V, 134 amp alternator
Air Cleaner Dual element
Radiator Fan Suction
Operation 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar)
Tank capacity 110 gal 416.4 L
Frame Description Four independent hydraulic jacklegs
Axle/Suspension Leaf spring
Tires - Option One 445/50R22.5l
Hopper Capacity 6.5 cu yd 5 cu m
Hopper Bottom Width 37.5 " 95.3 cm
Apron Conveyor Speed 0-15 ft/min
Apron Opening Height 45 " 114.3 cm
Apron Opening Width 37.5 " 95.3 cm
Hopper Height 9.5' from ground level at operating incline
Hopper Opening 11.7' x 5.3'
Apron Conveyor Length 12.4 ' 3.8 m
Apron Conveyor Belt Width 42 " 106.7 cm
Apron Conveyor Rollers 5" CEMA "D" x 17
Drum Operation 0-33.1 gpm (0-125.3 L/min)
Drum Motor 48.8 cu in (800 cu cm) displacement
Drum Diameter 6.5 ' 2 m
Drum Support Description 8 polyurethane trunnion wheels on pivoting bogeys 8" od x 4" wide
Thrust Bearing Diameter 4 " 10.2 cm
Thrust Bearing Face 2.5 " 6.4 cm
Drum Speed 0-21 rpm
Drum Drive Chain 140 extended pin/extended width
Drum Angle Adjustability 0-5 degrees
Maximum Screen Panels 8
Brush Diameter 14 " 35.6 cm
Bristle Material Polyethylene
Brush Assembly Support Two 1.25" sealed ball bearings/brush
Conveyor Motor Displacement 9.9 cu-in 162.2 cu-cm
Fines Conveyor Length 16 ' 4.9 m
Fines Belt Speed 620 ft/min 189 m/min
Conveyor Belt Width 36 " 91.4 cm
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
Head/Tail Pulley Type 8" crowned
Head Pulley Bearing 1 15/16" double roller
Rubber Flashing Adjustable corded rubber
Idler Type 4" CEMA "B" straight
Tail Pulley Takeup 9 " 22.9 cm
Self-Cleaning Return Idlers 4" rubber disk x 3
Fines Conveyor Frame Part of trailer frame
Conveyor Motor Displacement 9.9 cu-in 162.2 cu-cm
Fines Conveyor Length 22.8 ' 6.9 m
Fines Belt Speed 620 ft/min 189 m/min
Conveyor Belt Width 30 " 76.2 cm
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) cleated
Conveyor Belt Stacking Height 8' 2" (conveyor @ 25 degrees)
Head Pulley Type 8" crowned
Head Pulley Bearing 1.5" pillow block
Troughing Idler Type 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" centers
Self-Cleaning Tail Pulley Dimensions 5" diameter, 32" wide, crowned wing pulley, 1.5" shaft
Head Pulley Takeup 6 " 15.2 cm
Self-Cleaning Return Idlers 2, 4" diameter; 1, 5" diameter, "rattle roller"
Fines Conveyor Frame Engineered structural frame
Conveyor Motor Displacement 9.9 cu-in 162.2 cu-cm
Fines Conveyor Length 22 ' 6.7 m
Fines Belt Speed 620 ft/min 189 m/min
Conveyor Belt Width 42 " 106.7 cm
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) cleated
Conveyor Belt Stacking Height 8' 2" (conveyor @ 25 degrees)
Head Pulley Type 8" crowned
Head Pulley Bearing 1.5" pillow block
Troughing Idler Type 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" centers
Self-Cleaning Tail Pulley Dimensions 5" diameter, 44" wide, crowned wing pulley, 1.5" shaft
Head Pulley Takeup 6 " 15.2 cm
Self-Cleaning Return Idlers 2, 4" diameter; 1, 5" diameter, "rattle roller"
Fines Conveyor Frame Engineered structural frame
Overs Conveyor Length 17.5 ' 5.3 m
Maximum Variable Overs Belt Speed 350 ft/min 106.7 m/min
Conveyor Belt Size 48"
Conveyor Belt Type 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) cleated
Conveyor Belt Stacking Height 8'-10' (conveyor @25 degrees)
Head Pulley Type 8" crowned
Head Pulley Bearing 1.938" pillow block
Self-Cleaning Tail Pulley Dimensions 8" diameter, 50" wide, crowned wing pulley, 1.938" shaft
Head Pulley Takeup 6 " 15.2 cm
Solid Return Idler Size 1, 4" diameter
Overs Conveyor Frame Engineered structural frame

Images

TR620

VIDEOS

TR620 Trommel Screen | Vermeer Recycling Equipment

The TR620 trommel screen is built with the toughness you expect from Vermeer, packaged in a compact design to meet your jobsite needs. The tension screen and drum are designed for optimum productivity, offering simple adjustments and maintenance
July 29, 2016
The TR620 trommel screen is built with the toughness you expect from Vermeer, packaged in a compact design to meet your jobsite needs. The tension screen and drum are designed for optimum productivity, offering simple adjustments and maintenance

Find my Vermeer dealer