RTX1250 Ride-On Tractor

The RTX1250 offers contractors a powerful, yet versatile unit they can use in a variety of applications – including gas, fiber and electric utility installations. The unit’s quad track system can help enhance productivity by allowing you to work in a broader range of weather and ground conditions, making every day a work day. A wide range of attachments – from a variety of trenchers and plows, to a 52” (132.1 cm) rockwheel, help you attack a variety of jobs.
 

Features and benefits

 
•      Common controls across the RTX lineup (RTX450 through RTX1250) help operators
become more efficient and productive and help lessen training time.
 
•      As the engine rpm drops under load, the horsepower increases from 120 hp (89 kW) to 127 hp (95 kW) to run at maximum horsepower in work mode — helping increase performance and productivity.
 
•      On a normal working day, the machine can operate all day before it’s necessary to refuel the 42.6 gal (161.3 L) fuel tank — helping to increase jobsite productivity.
 
•      Hydraulic and engine coolers are arranged in a single parallel layer providing access for service and routine maintenance — making coolers easier to inspect and keep clean, optimizing cooling performance.
 
•      Four independent rubber tracks have several benefits over traditional rubber tires on many jobsites — including improved floatation, reduced surface damage, increased tractive effort and greater stability.
 
•      Interchangeable axle hubs allow the RTX1250 to change from a track machine to a rubber
tire machine — giving contractors the flexibility to meet jobsite demands.
 
•      Differential locks and planetary axles allow the operator to distribute torque equally to all wheels so turf damage, axle stress and tire wear are reduced.
Weight (basic tractor, rubber tires) 10690 lbs 4848.9 kg
Weight (basic tractor, tracks) 15270 lbs 6926.4 kg
Length (basic tractor, rubber tires) 157.2 " 399.3 cm
Length (basic tractor, tracks) 166.8 " 423.7 cm
Width (basic tractor, rubber tires) 86 " 218.4 cm
Width (basic tractor, tracks) 92.5 " 235 cm
Height (basic tractor, rubber tires) 108.5 " 275.6 cm
Height (basic tractor, tracks) 108.5 " 275.6 cm
Ground Clearance (rubber tires) 14 " 35.6 cm
Ground Clearance (tracks) 14 " 35.6 cm
Make and Model Cummins QSF3.8
Gross Horsepower (Maximum) 120 hp 89.5 kw
Maximum Torque 360 ft-lb 488.1 Nm
Cooling Medium Liquid
Fuel Type Ultra-low sulfur diesel
Emissions rating Tier 4 Final EPA/CARB
Noise Level at Operator's Ear 95 dB(a)
Make and Model Cummins QSB4.5TAA
Maximum Torque 350 ft-lb 474.5 Nm
Cooling Medium Liquid
Fuel Type Diesel
Emissions rating Tier 3 (EU Stage IIIA)
Noise Level at Operator's Ear 96 dB(a)
Ground drive pump capacity 30.3 gpm 114.7 L/min
Ground drive pump relief 6090 psi 419.9 bar
Attachment pump capacity 66 gpm 249.8 L/min
Attachment pump relief 5500 psi 379.2 bar
Auxiliary pump capacity 18.5 gpm 70 L/min
Auxiliary pump relief 2500 psi 172.4 bar
Fuel Tank 42.6 gal 161.3 L
Hydraulic Tank 29.9 gal 113.2 L
Hydraulic System 33.9 gal 128.3 L
Coolant 7.3 gal 27.4 L
Maximum forward transport speed (high) 10.6 mph 17.1 km/h
Maximum reverse transport speed (high) 10.6 mph 17.1 km/h
Tire size 38" x 18 - 20" (97 cm x 45.7 - 50.8 cm)
Maximum forward transport speed (high) 8.9 mph 14.3 km/h
Maximum reverse transport speed (high) 8.9 mph 14.3 km/h
Front Axle Type Steerable planetary with hydraulic differential lock
Rear Axle Type Steerable planetary with hydraulic differential lock
Axle load rating (static, per axle) 35970 lbs 16315.7 kg
Outside Turning Diameter (Rubber Tires, Front Steer Only) 40 ' 12.2 m
Outside turning diameter (tracks, front steer only) 40 '
Outside Turning Diameter (Rubber Tires, Front and Rear Steer) 23 ' 7 m
Outside turning diameter (tracks, front and rear steer) 26 '
Service Brake Type Hydrostatic
Parking Brake Type Spring-applied hydraulic release

Power down through the surface for efficient cable installation with minimal surface disruption.

Model Name VPX1250
Drive Type Hydrostatic
Weight Without Blade 3690 lbs 1673.8 kg
Length (Minimum Transport) 66.3 " 168.4 cm
Shaker Force (Maximum RPM) 35900 lbs 16284 kg
Maximum Plow Steer Angle 30 deg
Maximum Swing Angle 30 deg
Maximum Plow Depth (Rubber Tires) 36 " 91.4 cm
Maximum Plow Depth (Tracks) 42 " 106.7 cm

Cuts through rock, concrete and other tough surfaces.

Model Name RW1236W
Drive Type Hydrostatic
Weight (Without Teeth and Segments) 4260 lbs 1932.3 kg
Length (Minimum Transport) 88.6 " 225 cm
Ground Clearance (Maximum Transport) 28.4 " 72.1 cm
Wheel Diameter 88 " 223.5 cm
Maximum Cutting Depth 36 " 91.4 cm
Maximum Cutting Width 12 " 30.5 cm
Minimum Cutting Width 4 " 10.2 cm

Cuts a width of 4-12”/10-30 cm in a single pass.

Model Name RW1240W
Drive Type Hydrostatic
Weight (Without Teeth and Segments) 5880 lbs 2667.1 kg
Length (Minimum Transport) 94.3 " 239.5 cm
Ground Clearance (Maximum Transport) 21.7 " 55.1 cm
Wheel Diameter 97 " 246.4 cm
Maximum Cutting Depth 40 " 101.6 cm
Maximum Cutting Width 12 " 30.5 cm
Minimum Cutting Width 4 " 10.2 cm

Flexible trenching or plowing option in one attachment.

Model Name PT1250
Drive Type Hydrostatic
Weight (No Blade, Boom, or Chain) 4270 lbs 1936.8 kg
Length (Minimum Transport) 79.1 " 200.9 cm
Shaker Force (Maximum RPM) 35900 lbs 16284 kg
Maximum Plow Depth 30 " 76.2 cm
Maximum Trench Depth 60 " 152.4 cm
Maximum Trench Width 12 " 30.5 cm
Minimum Trench Width 6 " 15.2 cm

Cut clean, flat-bottomed trenches the size you need.

Cut through difficult rock formations with high volume spoil removal.

Gives you an offset of up to 27”/69 cm and uniform spoils displacement up to 60”/152 cm from the center of the trench.

Model Name SOC1250
Drive Type Hydrostatic
Weight (48 " (121.92 cm) boom, no chain) 4650 lbs 2109.2 kg
Length (Minimum Transport) 114.9 " 291.9 cm
Maximum Trench Depth 60 " 152.4 cm
Maximum Trench Width 16 " 40.6 cm
Minimum Trench Width 6 " 15.2 cm
Maximum offset 27 " 68.6 cm
Maximum Spoil Displacement (From Center of Trench) 59 " 149.9 cm

Cuts a depth of 52” (132.1 cm) through rock, concrete and other tough surfaces.

Model Name RW1252W
Drive Type Hydraulic motor (MS35-Poclain single speed)
Weight (Without Teeth and Segments) 7670 lbs 3479.1 kg
Length (Minimum Transport) 10.9 " 27.7 cm
Ground Clearance (Maximum Transport) 20.5 " 52.1 cm
Wheel Diameter 106 " 269.2 cm
Maximum Cutting Depth 52 " 132.1 cm
Maximum Cutting Width 8 " 20.3 cm
Minimum Cutting Width 4 " 10.2 cm

The VPX1255 is a plow attachment for the RTX1250 and XTS1250 tractors. 

Model Name VPX1255
Drive Type Hydrostatic
Weight Without Blade 3300 lbs 1496.9 kg
Length (Minimum Transport) 66.3 " 168.4 cm
Shaker Force (Maximum RPM) 35800 lbs 16238.6 kg
Maximum Plow Steer Angle 30 deg
Maximum Swing Angle 30 deg
Maximum Plow Depth (Rubber Tires) 36 " 91.4 cm
Maximum Plow Depth (Tracks) 42 " 106.7 cm

Images

RTX1250 Ride-On Tractor Static 01

VIDEOS

A Vermeer RTX1250 Ride-on Tractor is Put to the Test

The Challenge is a working runway on a tight deadline and every day over deadline results in a $150,000 fine. Watch to find out the results!
July 08, 2014
The Challenge is a working runway on a tight deadline and every day over deadline results in a $150,000 fine. Watch to find out the results!

Find my Vermeer dealer