Vermeer FTX25 Footings Trencher

Vermeer has introduced the FTX25 — a stand-on, track- mounted trencher built to dig footings up to 26 inches (66 cm) deep and up to 12 inches (30.48 cm) wide for residential concrete slab installations. This machine offer two boom lengths — 20 inch (50.8 cm) or 26 inch (66 cm) — and can cut a footing trench up to 12 inches (30.5 cm) in width. A variable-position boom can be offset up to 2 inches (5.1 cm) outside the track undercarriage, allowing the operator to trench flush with the footing backer or form board. The trenching boom can be easily repositioned to a center-mount position to accommodate other trenching applications, such as utility and irrigation installations. 

Features and benefits

  • The FTX25 uses welded cutter spacers making it easier to change from 8", 10" or 12" (20.3 cm, 25.4 cm or 30.5 cm) cutting width and back without having to remove several spacer blocks
  • The proven design from compact utility loaders, allows for common components. High-mounted track sprocket design helps eliminate sprocket wear caused by ground service engagement and keeps the sprocket and motor up out of the dirt, mud and debris
  • No tools are required to access routine service points, the engine, and other critical components that are strategically placed on the machine for convenient maintenance
  • Add Confidence Plus® Asset Protection Program in your initial purchase or add it anytime within the standard one-year warranty period. When you finance your maintenance expenses, you can know and plan for a fixed cost upfront. Check with your local Vermeer dealer for specific model availability. 
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts
Operator Station Design Stand on/track drive
Length (No Boom/chain) 94 " 238.8 cm
Width 35.8 " 90.9 cm
Height (No Boom/chain) 53 " 134.6 cm
Weight (No Boom/chain) 2525 lbs 1145.3 kg
Track Length on Ground 42"
Track Ground Pressure (7" tracks) 3.8 psi .3 bar
Track Ground Pressure (9" tracks) 3 psi .2 bar
Make and Model Kohler Command PRO ECH740 EFI
Fuel Type Gas
Horsepower at Maximum RPM (Gross) 25 hp 18.6 kw
Displacement 45 cu-in .7 L
Number of Cylinders 2
Cooling Medium Forced Air
Aspiration Natural
Maximum Operating Angle (Fore/Aft)* 25 deg
Maximum Operating Angle (Left/Right)* 25 deg
Fuel Tank 6.5 gal 24.6 L
Hydraulic Tank 8 gal 30.3 L
Hydraulic System 9 gal 34.1 L
Engine Oil .5 gal 1.9 L
Attachment Pump Relief Pressure (Trencher/Forward) 2975 psi 205.1 bar
Ground Drive Pump Relief Pressure Forward/Reverse 2900 psi 199.9 bar
Ground Drive Pump gpm at Maximum Engine RPM 10 gpm 37.9 L/min
Attachment Pump gpm at Maximum Engine RPM 13.1 gpm 49.6 L/min
Hydraulic Return Filter Rating 3 micron nominal
Ground Drive Type Hydrostatic
Maximum Forward Transport Speed at Full Throttle 2.5 mph 4 km/h
Maximum Reverse Transport Speed at Full Throttle 1.8 mph 2.8 km/h
Drive Type Hydraulic
Trencher position Flush mount or offset
Trencher position adjustment Manual
Trencher Chain Speed 500 ft/min 152.4 m/min
Weight (26 " (66.0 cm) boom, no chain) 2620 lbs 1188.4 kg
Length (Minimum Transport) 116.5 " 295.9 cm
Maximum Trench Depth 26 " 66 cm
Maximum Trench Width 12 " 30.5 cm
Minimum Trench Width 4 " 10.2 cm
Steering Dual, pilot operated joystick
Trencher function actuation Direct hydraulic valve control
Track Brake Automatic spring applied

Cut clean trenches the size you need.

Images

FTX25 COB

Find my Vermeer dealer