T655 COMMANDER 3 Tractor

with trencher, rockwheel or bucket wheel attachment

Cut through tough ground conditions with the T655III Commander® 3 tractor with optional trencher, rockwheel or bucket wheel attachment. The optional bucket wheel attachment is designed for the installation of small-diameter cross-country pipelines and helps increase productivity in soft soils, while the optional rockwheel attachment is designed for highway lighting, fiber installation and rock applications. The Tier 3 or Tier 4 Final John Deere 6090 HF diesel engine provides the power to dig up to 8’ (2.4 m) deep. Low-speed, high-torque splined headshaft motor improves cutting performance and minimizes chain wear, while the exclusive Vermeer SmartTEC electronic control system monitors real-time machine performance.

Features and benefits

  • Improve job monitoring with the exclusive Vermeer SmartTEC electronic control system.
  • Dig trenches for cross-country pipeline using the optional bucket wheel or rockwheel attachment.
  • Help increase operator safety with the Rollover Protective Structure (ROPS).
  • Put the spoils where you want them with optional longer, wider conveyors that place soil farther from the machine.
  • Vermeer Vantage Track Extended Care Service Program offers an optional 3-year/3,000-hour or 5-year/5,000-hour warranty on the components of the closed-loop hydrostatic systems.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
     
Approach Angle 16 deg
Height Range 119" (302.3 cm)
Length with 20" (50.8 cm) End Idler and 4 ft (1.22 m) Boom 25.6 ' 7.8 m
Length with 20" (50.8 cm) End Idler and 6 ft (1.83 m) Boom 27.8 ' 8.5 m
Length with 20" (50.8 cm) End Idler and 8 ft (2.44 m) Boom 30.1 ' 9.2 m
Length with 40" (101.6 cm) End Idler and 4 ft (1.22 m) Boom 23.6 ' 7.2 m
Length with 40" (101.6 cm) End Idler and 5 ft (1.52 m) Boom 25.3 ' 7.7 m
Length with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom 26.3 ' 8 m
Length with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom 28.5 ' 8.7 m
Weight Range 40,000 lb - 59,500 lb (18,143.7 kg - 26988.7 kg)
Width Ranges 97" (246.4 cm)
Make and Model John Deere 6090 HF Tier 3
Gross Horsepower 250 hp 186.4 kw
Rated Engine RPM 2200
Number of Cylinders 6
Fuel Tank Capacity 135 gal 511 L
Operating Range 11 hours
Fuel Consumption at Full Load 12.3 gph 46.6 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 30 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Make and Model John Deere 6090HFC09 Tier 4 Final
Gross Horsepower 250 hp 186.4 kw
Rated Engine RPM 2200
Number of Cylinders 6
Fuel Tank Capacity 135 gal 511 L
Operating Range 11 hrs
Fuel Consumption at Full Load 12.1 gph 45.8 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 30 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Auto Self Level Yes
Ground Pressure Minimum 7.8 psi 53.8 kPa
Ground Pressure Maximum 9.7 psi 66.9 kPa
Tilt Track Available Yes
Tilt Track Max Angle 10.5 degrees
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 136.5 " 346.7 cm
Track Pad Type Single, double or triple grouser
Track Pad Width Ranges 20" (50.8 cm)
Track Size D4
Maximum Ground Speed - Low 114 ft/min 34.7 m/min
Maximum Ground Speed - High 227 ft/min 69.2 m/min
Parking and Emergency Brake spring-applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
Belt Width 24 " 61 cm
Conveyor Belt Speed Range 0-758 fpm (231 m/min)
Conveyor Belt Style Cleated
Conveyor Length 96" and 144" (243.8 cm and 365.8 cm)
Conveyor Shift Available Yes
Conveyor Shift Distance Range 12" and 48" (30.5 cm and 121.9 cm)
Conveyor Style Flat or curved
Discharge Direction Right or left
Discharge Height Range 48" and 56" (121.9 and 142.2 cm)
Trencher Yes
Terrain Leveler No
Rockwheel Yes
Bucket Wheel Yes
Cab Yes
Control System TEC Plus with SmartTEC
Air Conditioner/Heater Yes
Air Suspension Seat No
AM/FM Stereo with Weather Band Yes
Elevating No
Pressurized/Filtered Air Yes
Roll Over Module (ROM) No
ROPS Standard
Oil Tank Capacity 85 gal 321.8 L
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting 2500 psi 172.4 bar
Pump Flow at Maximum RPM 25 gpm 94.6 L/min
Pump Type pressure-and-flow-compensated (load-sensing)

Ideal for trenching in soft soils.

Height 11.4 ' 3.5 m
Width 3 ' .9 m
Length 8 ' 2.4 m
Gross Weight 53500 lbs 24267.2 kg
Cut Width 22 ", 24 ", or 28 " (55.9 cm, 61 cm, or 71.1 cm)

Cut clean trenches.

Boom Depth Options 4 ', 5 ', 6 ', or 8 ' (1.2 m, 1.5 m, 1.8 m, or 2.4 m)
Sectionalized Boom Yes; on 40 " (101.6 cm) End Idler only
Boom Top Rollers Yes; on sectionalized boom only
Minimum Chain Speed 617 ft/min 188.1 m/min
Maximum Chain Speed 881 ft/min 268.5 m/min
Cutting Width 10.5 ", 12 ", 14 ", 16 ", 18 ", 20 ", 24 ", or 26 " (26.7 cm, 30.4 cm, 35.6 cm, 40.6 cm, 45.7 cm, 50.8 cm, 61 cm, or 66 cm)
Digging Chain Size 4501 and 4502
Idler Diameter 20 " or 40 " (50.8 cm or 101.6 cm)
Trencher Drive Type Hydrostatic, two pumps and one motor
Maximum Digging Depth 96 " 243.8 cm
Maximum Cutting Width 26 " 66 cm

RW6548 Rockwheel Attachment for the T655III.

Weight of Attachment 14500 lbs 6577.1 kg
Weight of Tractor and Rockwheel Attachment 59500 lbs 26988.7 kg
Maximum Cutting Depth 48 " 121.9 cm
Cutting Width 3" / 7.6 cm min, 10" / 25.4 cm max
Drive Type Hydrostatic, 2 pumps and 2 motors
Maximum Wheel Speed - Low 1110 ft/min 338.3 m/min
Maximum Wheel Speed - High 2220 ft/min 676.7 m/min

Images

T655 Commander 3

Trencher attachment

VIDEOS

T655 Commander 3

Watch it work!
February 13, 2010
Watch it work!

Find my Vermeer dealer