SC802 Stump Cutter

Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103” (262 cm) sweep arch and 60” (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.

Features and benefits

  • Collect chips as you work in the 68 cu ft (1.9 cu m) containment area under the rear deck.
  • Keep your distance when you opt for the remote control, which operates the cutter up to 100’ (30 m) away from the unit.
  • Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Length - Tongue In 167.3 in 424.9 cm
Length - Tongue Extended 234 in 594.4 cm
Length 167.3 in 424.9 cm
Width 79.8 in 202.7 cm
Height 79 in 200.7 cm
Weight - Engine Option One 4400 lbs 1995.8 kg
Weight - Engine Option Two 4040 lbs 1832.5 kg
Tongue Weight - Engine Option One 460 lbs 208.7 kg
Tongue Weight - Engine Option Two 380 lbs 172.4 kg
Sound Power 108.0 dB(a)
Sound Power - Engine Option Two 112.3 dB(a)
Make and Model Deutz TD2.9L Tier 4 Final
Number of Cylinders 4
Gross Horsepower (Maximum) 74 hp 55.2 kw
Torque (Max) 188 ft-lb 254.9 Nm
Fuel Tank Capacity 25 gal 94.6 L
Max Fuel Consumption 4.6 gph 17.4 lph
Fuel Type Diesel
Air Cleaner Dry-type with precleaner, restriction indicator, evacuator valve and safety element
Oil Filter Spin-on
Recommended Oil 15W40 Deutz
Oil Volume with Filter 10.6 qt 10 L
Maximum Angle of Continuous Operation 30 deg
Cooling Medium Air-cooled head, oil-cooled block
Alternator 95 amp
Clutch Type Electric clutch with brake
Cutterwheel Diameter without Teeth 28 in 71.1 cm
Cutterwheel Thickness .9 in 2.4 cm
Cutterwheel Speed 881 rpm
Cutterwheel Straight Line Dimension 96 in 243.8 cm
Cutterwheel Cut Above Ground 35 in 88.9 cm
Cutterwheel Cut Below Ground 25 in 63.5 cm
Tooth Description Yellow Jacket™ cutter system
Number of Teeth 42
Number of Indexes 2
Number of Pockets 42
Reversible Pockets Yes
Cutterwheel Guard Standard
Chip Containment 68 cu ft 1.9 cu m
Upper Gearbox Straight bevel
Oil Type SAE 75W90 synthetic gear oil
Oil Capacity 1.7 qt 1.6 L
Lower Gearbox Straight bevel
Oil Type - Lower Gearbox SAE 75W90 synthetic gear oil
Oil Capacity - Lower Gearbox 2.2 qt 2.1 L
Driveshaft Rubber dampened with 2 universal joints
Driveshaft - U Joints Two standard with double lip seal
Tank capacity 6 gal 22.7 L
Recommended Oil Type Vermeer HyPower 68
System Type Gear pump, pressure balanced
Filtration Method 6 micron full flow return filter; suction strainer
Pump Flow at Maximum RPM 3.2 gpm 12.1 L/min
System relief pressure 2000 psi 137.9 bar
Flow Control Yes
Directional Control Yes
System Voltage 12 Volt
Battery 950
Standard Gauges MFD Multifunction LCD Display
Warning Lights Engine warning
Switches Ignition, throttle and clutch
Controller Operation with AutoSweep
Display Multifunction Display (MFD)
Shutdown System Low oil pressure, high engine coolant temp
Radio Remote Control None
Frame Description Reinforced 4" (10.2 cm) square tubing
Control Station Description Swing-out
Operator Vision Shield Description Abrasion-resistant coated poly carbonate
Toolbox Description Standard
Tongue Description Extendable
Tongue Extension 60" (152.4 cm)
Hitch Type Pin, pintle, 2 1/6" (1.6 cm) ball
Tires - Option One Std. 8.75-16LT Tubeless bias-ply load range D
Fender Description Weld-on
Axle/Suspension Rubber torsional axle
Type - Option One Weld-on
Manufacturer - Option One Dexter
Capacity - Option One 6000
Tires - Standard 10x16.5LT Tubeless, bias ply, load ranged D
Wheels - Standard 16.5"x 8.3" (41.9 x 21 cm) mod style, 6 bolt circle
Brake Type Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
Trailer Light Type LED
Special Paint Optional
Extended Warranty Optional
Preventive Maintenance Optional

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries

Videos

SC802 Stump Cutter: View 1

SC802 Stump Cutter

Images

SC802 Stump Cutter

This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.