SC30TX Stump Cutter

With a focus on ease-of-operation, the compact design of the SC30TX offers intuitive controls, minimal service points and the performance of a machine that gets the job done. The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.

Features and benefits

  • AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
  • Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Length 94 in 238.8 cm
Width 35 in 88.9 cm
Height 49 in 124.5 cm
Weight - Engine Option One 1550 lbs 703.1 kg
Make and Model Kohler ECH740
Number of Cylinders 2
Gross Horsepower (Maximum) 25 hp 18.6 kw
Torque (Max) 42 ft-lb 56.9 Nm
Fuel Tank Capacity 6.8 gal 25.7 L
Max Fuel Consumption 2.4 gph 9.1 lph
Fuel Type Gas
Air Cleaner 6 " (15.2 cm) 2-Stage dry
Oil Filter Spin-on
Recommended Oil Kohler oil or API CH4/SJ
Oil Volume with Filter 2 qt 1.9 L
Maximum Angle of Continuous Operation 25 deg
Cooling Medium Air/oil
Cutterwheel Diameter without Teeth 16 in 40.6 cm
Cutterwheel Thickness .5 in 1.3 cm
Cutterwheel Speed 1110 rpm
Cutterwheel Straight Line Dimension 35.5 in 90.2 cm
Cutterwheel Cut Above Ground 25 in 63.5 cm
Cutterwheel Cut Below Ground 12 in 30.5 cm
Tooth Description Yellow Jacket Cutter System
Number of Teeth 16
Number of Indexes 2
Number of Pockets 16
Reversible Pockets Yes
Cutterwheel Guard Yes
Chip Containment 2.2 cu ft .1 cu m
Lower Gearbox Hydraulic motor
Tank capacity 9 gal 34.1 L
Recommended Oil Type ISO 68
System Type Open loop
Filtration Method Inline return filter
Pump Flow at Maximum RPM 16 gpm 60.6 L/min
System relief pressure 2750 psi 189.6 bar
Flow Control Autosweep (option)
Directional Control Standard
Oil Cooler Yes. Fan-cooled
System Voltage 12
Battery 405
Standard Gauges Hour meter/tach
Switches Cutter wheel drive
Controller Yes
Control Station Description Fixed-rear
Track Type Rubber 7 " (17.8 cm) width
Track Width - Retracted 35 " (88.9 cm)
Track Width - Extended 35 " (88.9 cm)
Track Length on Ground 31.4 " (79.7 cm)
Type of Idler Cast
Number of Idlers 5
Track Drive Pump Type Hydrostatic
System Relief Pressure 2900 psi (200 bar)
Pump Flow at Maximum RPM 11.4 gpm (43.1 L/min)
Track Drive Motor Type Geroter
Track Brake Type Hydrostatic
High Speed Travel 3.2 mph 5.1 km/h
Ground Bearing Pressure - Soft Ground 3.4 psi 23.4 kPa
Special Paint Per request
Extended Warranty Per request
Preventive Maintenance Per request

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries


SC30TX Stump Cutter

Watch it work!



This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.