SC1152 Stump Cutter

Powerful enough to handle large, land-clearing projects but narrow enough to fit through a standard 36”/91.4 cm gate, the SC1152 stump cutter is loaded with innovative features. Variable speed saves you time on the job. Joystick controls are easy to master. Super-sized 27”/68.6 cm cutting wheel swiftly grinds away stubborn hardwood stumps. The Yellow Jacket™ Cutter System helps extend pocket and tooth life and facilitates routine maintenance.

Features and benefits

  • Maximizes cutting width because the high cutter wheel moves away from the machine as the boom drops.
  • Keep your distance when you opt for the remote control, which operates the cutter up to 100’/30 m away from the unit.
  • Clear away chips when the stump is eliminated using the front-mounted chip blade.
  • Reduce maintenance time through features like easily-accessed service points and a direct-drive hydrostatic pump that eliminates clutch and belt drive issues.  
  • Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline and a 1-year/1000-hour Vermeer equipment limited warranty.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
     
Length 147 " 373.4 cm
Width 35 " 88.9 cm
Height 76.5 " 194.3 cm
Weight - Engine Option One 4200 lbs 1905.1 kg
Width with Dual Wheel Option (Additional) 56 " 142.2 cm
Sound Power 115 dB(a)
Make and Model Cummins QSB3.3
Number of Cylinders 4
Gross Horsepower (Maximum) 110 hp 82 kw
Torque (Max) 306 ft-lb 414.9 Nm
Fuel Tank Capacity 13.5 gal 51.1 L
Max Fuel Consumption 6 gph 22.7 lph
Fuel Type Diesel
Air Cleaner Two stage dry
Oil Filter Full flow spin on
Recommended Oil 15W40 Cummins Premium Blue
Oil Volume with Filter 9 qt 8.5 L
Maximum Angle of Continuous Operation 35 deg
Cooling Medium Liquid
Coolant Capacity (Engine and Radiator) 2.5 gal 9.5 L
Alternator 95 amp
Fan Suction
Clutch Type Hydrostatic transmission
Cutterwheel Diameter without Teeth 24 " 61 cm
Cutterwheel Thickness 1.1 " 2.9 cm
Cutterwheel Speed 930 rpm
Cutterwheel Straight Line Dimension 72 " 182.9 cm
Cutterwheel Cut Above Ground 31 " 78.7 cm
Cutterwheel Cut Below Ground 25 " 63.5 cm
Tooth Description Yellow Jacket Cutter System
Number of Teeth 30
Number of Indexes 2 per tooth
Number of Pockets 30
Reversible Pockets Yes- standard
Cutterwheel Guard Standard
Chip Containment 28.2 cu ft 0.8 cu m
Lower Gearbox 90 degree
Oil Type - Lower Gearbox SAE 75W90 synthetic gear oil
Oil Capacity - Lower Gearbox 2.7 qt 2.6 L
Driveshaft Standard
Driveshaft - U Joints Two standard with double lip seals
Tank capacity 14 gal 53 L
Recommended Oil Type Vermeer HyPower 68
System Type Two closed loops and 1 open
Filtration Method Suction strainers, two charge pump filters and one 6-micron return filter
System relief pressure 3000 psi 206.8 bar
Oil Cooler Standard
System Voltage 12 volt
Battery 950 CCA
Standard Gauges Hour meter and fuel gauge
Warning Lights Low oil pressure, high engine temperature, alternator/charging, wait to start manifold air intake heater indicator, high and low hydraulic temp, ACS controller function lights- various functions shown on controller
Switches Two speed ground drive, blade, steering, boom controls, differential propel lock, AutoSweep settings, cutter wheel engage/disengage, creep and propel system joystick
Controller Vermeer ACCS & Cummins ECU
Shutdown System High coolant temperature, low oil pressure and high hydraulic oil temperature
Radio Remote Control Optional- Functions include: propel forward/reverse; boom up/down, boom right/left, steering left/right, blade up/down (optional), AutoSweep settings, travel speed high/low, differential lock, engine throttle and engine stop.
Frame Description Welded tube and plate steel
Control Station Description Swing-out control station with three available positions plus auxiliary control station
Operator Vision Shield Description Abrasion resistant coated polycarbonate, 3/16 " (0.48 cm) thick.
Steerable Axle Type Two wheels, hydraulic
Degree of Oscillation 15 deg
Turning Radius 105 deg
Tires - Option One Front: 20x8.00-10 Rear: Duals, 23x8.5-14
Wheels - Option One Front: 10 " x 6 " (25.4 cm x 15.24 cm) rim Rear: 14 " x 6 " (35.56 cm x 15.24 cm) rim
Axle/Suspension Steerable axle type
Tires - Standard Rear: Duals 23x8.5-14
Wheels - Standard Rear: 14 " x 6 " (35.56 cm x 15.24 cm)
Brake Type Spring applied, hydraulic release at planetary drives and hydrostatic braking (closed loop)
Chip Blade Dimension Standard- 34 " wide by 13.75 " tall (86.4 cm wide by 34.9 cm tall)
Radio Remote Control Optional
Remote Functions Engine start/stop, throttle, cutter wheel engage, swing, raise/lower
Remote Display LED
Remote Range 300 ' (91.44 m)
Special Paint Optional
Extended Warranty 2 years/2000 hours or 3 years/3000 hours
Preventive Maintenance Optional

Find my Vermeer dealer