The right size mixing system is key for drilling operations, and the new MX300 mixing system can help you achieve maximum productivity. With the option to arrange your setup to meet the jobsite needs, this mix system can be configured through mounting the tank in a variety of positions related to the power unit. A single or dual tank can be paired with just one power unit, allowing for the option of more drilling fluid onsite. The narrow rectangular tank design can help maximize fluid volume and can be mounted for convenient transport and storage. Serviceability is efficient, with convenient access to the roll jets through the top of the tank. Drain your MX300 with two drainage points, activated with the opening of two easily accessible valves. With a suction hose and a wide-mouth hopper, inject your drilling additives into the system to create your right mix. The 350 gpm (1324.9 Lpm) pump flow efficiently mixes high volumes of fluid for a variety of bores – from smaller shots to large-diameter and longer-distance HDD applications in varying soil types. The MX300 mixing system pairs well with a variety of drills and is made to mix!
Spend less time refilling your gas tank and more time getting the job done with a 16 gal (60.6 L) fuel tank.
Configure the setup to fit your needs. Pair up to two tanks with the same power unit to provide more fluid onsite, with the option to support either the TK750 tank with 750 gal (2,839.1 L) or the TK1000 tank with 1000 gal (3,785.4 L).
A wide-mouth hopper pairs with the tapered bottom rectangular tank to help prevent drilling fluid additives from settling, assist with drainage and reduce buildup.
The MX300 features a new rectangular profile which can help maximize fluid volume and can be mounted for convenient transport of up to two tanks inside a standard-sized enclosed truck.
The MX300 is equipped with a 23 hp (17.2 kW) Kohler ECH 730 EFI engine and 350 gpm (1324.9 Lpm) pump flow to provide powerful performance on the job.
Daily tasks such as filling and draining are made convenient with a fresh water fill feature and two drain valves.
Maintain machine performance with efficient ways to manage necessary components. The occasional replacement of roll jets is convenient with access through the top of the tank, as well as convenient access to additional engine and pump service components.