D36x50DR Series II NAVIGATOR® Horizontal Directional Drill

Ready to rock? The new D36x50DR Series II features dual rod technology to handle the challenge of rock. With a class-leading inner torque rating of 1500 ft-lb (2033.7 Nm), operators will see increased power and length on bores. The drill can carry up to 500’ (152.4 m) of drill pipe, so there’s no need to load additional pipe when performing extended bores.
Need skilled HDD operators?  Get your employees trained by an industry leader. Learn more.

Features and benefits

  • Dual rod drilling provides powerful downhole cutting action with flexibility to select from a number of different tools to match your difficult conditions.
  • Operate with a wide range of pilot bore drill tools and the ability to effectively operate with backreamers typically required for the most challenging conditions.
  • Depending upon their preference, operators can choose between steel tracks or rubber tracks.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Length (Minimum Transport) 285 in 723.9 cm
Width (Minimum Transport) 90 in 228.6 cm
Width (With Cab, Minimum Transport) 90 in 228.6 cm
Height (Minimum Transport) 90 in 228.6 cm
Height (With Cab) 100 in 254 cm
Weight 28900 lbs 13108.8 kg
Weight (Cab Option) 29300 lbs 13290.3 kg
Make and Model John Deere PowerTech 4045HF275
Fuel Type Diesel
Gross Horsepower 140 hp 104.4 kw
Aspiration Turbocharged
Max Fuel Consumption 7.6 gph 28.6 lph
Maximum Operating Angle (Fore/Aft)* 30
Maximum Operating Angle (Left/Right)* 30
Thrust 38000 lbs 169 kN
Pullback 38000 lbs 169 kN
Maximum Carriage Speed at Maximum Engine RPM 116 ft/min 35.4 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM) 5500 ft-lb 7457 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM) 4500 ft-lb 6101.2 Nm
Maximum Spindle Torque (High at Maximum Engine RPM) 3000 ft-lb 4067.5 Nm
Maximum Spindle Speed at Max Engine RPM 210 rpm
Maximum Ground Drive Speed at Maximum Engine RPM 2.1 mph 3.4 km/h
Automated Rod Loader Yes
Drill Rack Angle 17.5 deg
Fuel Tank 45 gal 170.3 L
Hydraulic Tank 45 gal 170.3 L
Hydraulic System 55 gal 208.2 L
Maximum Flow 50 gpm 189.3 L/min
Maximum Pressure 1300 psi 89.6 bar
Maximum Flow 70 gpm 265 L/min
Maximum Pressure 1100 psi 75.8 bar
Drilling Lights Standard
Flow Indicator Standard
Stakedown System Aggressive (Optional)
Cab Optional
Strike Alert Standard
Remote Lockout Standard
Operator Presence Standard

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries


D36x50DR Series II Video

See the D36x50DR Series II Work!


D36x50DR Series II Horizontal Directional Drill

This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.