-
Equipment
-
- Parts and service
- Support
- News
- About us
- Careers
True classics stand the test of time and the Vermeer 604R Classic baler was designed with the customer in mind. With minimal setup, low horsepower requirements, user-friendly controls and the option to bale with netwrap or twine, the 604R Classic baler is an ideal fit for small to midsize operations who have affordability in mind.
| Bale Diameter | 72 in | 182.9 cm |
| Bale Width | 47 in | 119.4 cm |
| Bale Weight | 2000 lbs | 907.2 kg |
| Length - Standard | 164 in | 416.6 cm |
| Length (With Net) | 184 in | 467.4 cm |
| Length (With Ramp) | 198 in | 502.9 cm |
| Height | 121 in | 307.3 cm |
| Width - Standard | 101 in | 256.5 cm |
| Weight (Fully Optioned) | 6820 lbs | 3093.5 kg |
| Drawbar Weight | 1440 lbs | 653.2 kg |
| Type of Chamber | Variable | |
| Drive Roller Size | Two 5.5 in (14 cm) diameter, rubber coated, with 1.75 in (4.4 cm) hex bearings | |
| Start Roller Size | 5.3 in | 13.5 cm |
| Number of Plys | 3-ply mini rough top | |
| Width of Belt | 6.8 in | 17.3 cm |
| Number of Belts | 6 | |
| Type of Lace | Alligator® Rivet | |
| Length of Belt - Long | 536.5 in | 1362.7 cm |
| Length of Belt - Short | 557 in | 1414.8 cm |
| Driveline | 80 deg CV, 540 rpm | |
| Roller Chain | Single 60 and 80 | |
| Torque Protection - Main Input Shaft | Friction clutch | |
| Torque Protection - Pick-up | Radial pin clutch | |
| Bearing and Sprocket Configuration | Hex drive shafts and bearings |
| Horsepower Required | 60 hp | 44.7 kw |
| Horsepower Recommended | 80 hp | 59.7 kw |
| Width (Tooth to Tooth) | 71 in | 180.3 cm |
| Width (On Outside Flair) | 74 in | 188 cm |
| Tooth Bars | 4 | |
| Number of Teeth | 65 steel coil with 2.83" (7.2 cm) spacing | |
| Stripper Band Diameter | 12.6 in | 32 cm |
| Drive | Single 60 | |
| Floatation | Gauge wheels 4.8 - 16 HD semi-pneumatic with spring assist | |
| Pickup Lift | Manual standard, hydraulic optional |
| Bale Formation | Open throat rotor feed to vertical camber, hydraulic belt tension | |
| Monitor/Controller | Atlas™ control system | |
| Machine Adjustments | Adjustable gauge wheel height | |
| Miscellaneous | 3-year pickup warranty | |
| Safety Equipment | SMV sign/tail lights | |
| Tailgate Cylinders | Hydraulic cylinders | |
| Density System | Adjustable hydraulic bale density control via control system with optional physical gauge | |
| Tire Size - Standard | 14L - 16.1 tires |
| Monitor | Atlas™ control system | |
| Bale Shape Feedback (Left (L) / Center (C) / Right (R) indicators) | Optional left and right | |
| Number of wraps per bale for Net Wrap | Adjustable from 1.5 to 8 | |
| Number of Start/Center/End wraps for twine | Start 1-6, Center 1-8, End 1-6 | |
| Manual Override | Standard | |
| Pause function | Standard | |
| "Near Full" and "Full Bale" alarms | Standard | |
| Tailgate locked alarm/indicator | Standard | |
| Alarm on/off/volume control | Volume control only | |
| Real-time bale size data | Yes | |
| Real-time bale weight data | No | |
| Real-time moisture data | Optional | |
| Bales per hour | Yes | |
| Tons per hour | No | |
| Monitor Mount | Standard | |
| Self-diagnostic monitor and sensors | Standard | |
| Error history | Active only | |
| Touchscreen and button control | Touchscreen only | |
| Electronic Bale Density control | Standard | |
| Field Statistics | Basic 10 Fields |
| Feed Mechanism | Single arm applying two twines | |
| Twine Tension | Adjustable spring loaded tension plates | |
| Twine Storage | 6 balls routed |
| Feed Mechanism | Friction pan feed system onto main belts | |
| Net Tension | Yes | |
| Net Width | Capable of standard and over with netwrap | |
| Net Storage | 1 extra roll |
| Pickup Lift | Hydraulic (replaces manual lift crank) | |
| Safety Equipment | Fire extinguisher, safety chain | |
| Bale ramp | Hydraulic bale ramp | |
| Hydraulic Density Gauge | Physical gauge |
