-
Equipment
-
- Parts and service
- Support
- News
- About us
- Careers
The all-new Vermeer 504R Premium baler is fully loaded and comes standard with a silage kit specially designed for high output of high-moisture crops. More than a silage special, this baler is equipped with heavy duty components, premium belts, a 5-bar camless pickup and the AtlasTM Control System. This package offers more capacity in heavy crops and produces good looking bales in tough conditions. Plus, a Vermeer 3-year pickup warranty provides peace of mind for many silage seasons to come. Silage or not, this is your first-class baler.
| Bale Diameter | 60 " | 152.4 cm |
| Bale Width | 47 " | 119.4 cm |
| Bale Weight | 2000 lbs | 907.2 kg |
| Length - Standard | 156 " | 396.2 cm |
| Length (With Net) | 173 " | 439.4 cm |
| Length (With Ramp) | 169 " | 429.3 cm |
| Width - Standard | 99.5 " | 252.7 cm |
| Type of Chamber | Variable | |
| Drive Roller Size | Two 4.78” (12.1 cm) diameter, rubber coated, with 1.9” (4.9 cm) round bearings | |
| Idler Roller Size | 3.5 " | 8.9 cm |
| Start Roller Size | 4.5 " | 11.4 cm |
| Number of Plys | Goodyear G315 (Rockbelt) | |
| Width of Belt | 6.8 " | 17.3 cm |
| Number of Belts | 6 | |
| Type of Lace | Alligator® Rivet | |
| Length of Belt - Long | 465 " | 1181.1 cm |
| Length of Belt - Short | 455 " | 1155.7 cm |
| Driveline | 80 deg CV, 540 RPM Extended lube | |
| Roller Chain | Single 60 and 80 | |
| Torque Protection - Main Input Shaft | Friction clutch | |
| Torque Protection - Pick-up | Radial pin clutch | |
| Bearing and Sprocket Configuration | Round draft shafts and bearings |
| Horsepower Required | 55 hp | 41 kw |
| Horsepower Recommended | 65 hp | 48.5 kw |
| Width (Tooth to Tooth) | 60 " | 152.4 cm |
| Width (On Outside Flair) | 68.5 " | 174 cm |
| Tooth Bars | 5 | |
| Number of Teeth | (60) steel coil with 2.83 in (7.2 cm) spacing | |
| Stripper Band Diameter | 12.6 " | 32 cm |
| Drive | Single 60 | |
| Floatation | Gauge wheels 4.80-16 HD semi-pneumatic with spring assist | |
| Pickup Lift | Hydraulic standard |
| Bale Formation | Open throat rotor feed to vertical camber, hydraulic/spring | |
| Monitor/Controller | Atlas Control System | |
| Machine Adjustments | Adjustable guage wheel height, Adjustable hydraulic bale density control | |
| Miscellaneous | Drop 'n Go bale ejection, Hitch pin with retention system, SMV sign/tail lights, Moisture sensors, Pickup lift- hydraulic (replaces manual crank), Grease banks, 3 -year pickup warranty | |
| Tailgate Cylinders | Bolt-on spring loaded bale ramp | |
| Tire Size - Standard | 31 x 13.5 - 5 tires |
| Feed Mechanism | Single arm applying two twines | |
| Twine Tension | Adjustable spring loaded tension plates | |
| Twine Storage | 4 balls |
| Feed Mechanism | Friction pan onto main belts | |
| Net Tension | Brake system varies tension to maximize bales per roll of net | |
| Net Width | Capable of standard and over width netwrap | |
| Net Storage | 1 extra roll |
| Tires - Optional | Tires- 480/45 R17 flotation | |
| Safety Equipment | Fire extinguisher, safety chain | |
| Miscellaneous | Endless belts | |
| Work Lights | Work lights - set of three flood lights |
