504 PRO Silage Baler

Get pro silage baling performance with the next generation 504 Pro baler. It’s built to handle the demands of heavy, wet material and produce high quality bales in a variety of materials. For operators who want pro performance for frequent silage baling — the 504 Pro baler sets the standard.

Features and benefits

  • Heavy-duty drive components, from chains to bearings, to effectively and consistently handle heavy, dense silage bales.
  • Hydroflexcontrol allows the baler floor to flex up and down to minimize blockage in the pick-up. Or, the operator can hydraulically open the floor from the cab to clear plugs and move material back into the chamber.
  • Xtracut17 chopper system cuts the crop for better bale density, fermentation, silage quality and digestibility. The pre-cut crop also provides a consistent material for additions to rations fed using a mixer wagon.
  • All-new color touchscreen E-Link Pro monitor comes standard and offers the ability to electronically adjust density control from the cab, collect and store comprehensive field and operation statistics, and more. See the specifications below for additional monitor functions.
  • Patented Powersplit Transmission provides a split gearbox design that controls belts and rollers separately from the rotor and pick-up, to make better use of horsepower when baling heavy material.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Bale Diameter 60 in 152.4 cm
Bale Width 48 in 121.9 cm
Bale Weight 2400 lbs 1088.6 kg
Length (With Ramp) 196.1 in 498.1 cm
Height 115 in 292.1 cm
Width - Standard 96 in 243.8 cm
Weight (Fully Optioned) 8680 lbs 3937.2 kg
Drawbar Weight 1520 lbs 689.5 kg
Type of Chamber Variable
Number of Rollers 15
Idler Roller Size 9.6 in 24.4 cm
Width of Belt 11.2 in 28.4 cm
Number of Belts 4
Type of Lace Endless Belts
Length of Belt - Long 433.1 in 1100.1 cm
Driveline 80 Degree CV, 540 RPM
Roller Chain 12 B-1, 16 B-1, 20 B-1, 12 B-2, 16 B-2
Torque Protection - Main Input Shaft Cutout clutch
Torque Protection - Pick-up Radial Pin Clutch
Bearing and Sprocket Configuration Round drive shafts, greasable roller bearings
Horsepower Required 80 hp 59.7 kw
Horsepower Recommended 110 hp 82 kw
Width (Tooth to Tooth) 73 in 185.4 cm
Width (On Outside Flair) 78 in 198.1 cm
Tooth Bars 5, camless
Number of Teeth 65 steel double tines
Stripper Band Diameter 12.3 in 31.2 cm
Drive 12 B-1
Floatation Pneumatic gauge wheels - 16 x 6.50 - 8 - spring assist
Pickup Lift Hydraulic
Bale Formation Horizontal chamber with bottom drum
Monitor/Controller E-link Pro
Machine Adjustments Gauge wheel height and hydraulic denisty
Miscellaneous Automatic chain lube system, shaft driven and adjustable, spring loaded bale ramp
Safety Equipment SMB sign, tail lights
Tailgate Cylinders Standard hydraulic cylinders, single acting
Density System Electronically adjustable via E-link Pro controller
Tire Size - Standard 21.5L-16.1 tires (604 Pro)
Monitor E-Link Pro
Bale Shape Feedback (Left (L) / Center (C) / Right (R) indicators) Left, Right
Number of wraps per bale for Net Wrap Yes
Manual Override Yes
Pause function Yes
"Near Full" and "Full Bale" alarms Yes, adjustable "Near Full" alarm
Tailgate locked alarm/indicator Yes
Ramp "home" indicator Yes
Alarm on/off/volume control Yes
Real-time bale size data Yes, bale diameter
Bales per hour Yes
Monitor Mount RAM MOunt
Self-diagnostic monitor and sensors Yes
Error history Yes
Touchscreen and button control Yes
Electronic Bale Density control Yes
Dual Knife Bank Control Yes
Field Statistics Yes
Feed Mechanism Steel and rubber feed rollers
Net Tension Adjustable disk brake
Net Width Capable of standard and over width netwrap; 48 " and 51 " (121.9 cm and 129.5 cm)
Net Storage One extra roll storage located in easy load system, second extra roll storage inside left side door
Knife Protection HydroFlexControl, hydraulic acumulator
Engage/Disengage Select in the E-Link control, hydraulic valve actuated
Safety Equipment Fire extinguisher, safety chain

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries


504 PRO Baler Video

Watch the 504 PRO Work!


504 Pro Feature 01

Recent news

August 23, 2016
The additions include the next generation 504 Pro baler and the all-new 604 Pro baler which are designed for operators who need the durability required for silage baling, while maintaining the flexibility to put up high quality dry bales.

This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.