Final Cut™ FPX9000 Bale Processor

>

The Final Cut™ FPX9000 bale processor from Vermeer allows you to process the amount of forage material you need, on your own time. Optimal cut-length for feeding cattle is achieved as material passes through multiple cut points. The Final Cut FPX9000 is readyfor windrow or bunk feeding, or processing material into a bunker or other storage item for mixing rations later. An optional powered side wall allows you to process round or square bales. Get the consistency, versatility and speed you need with the Vermeer Final Cut FPX9000 bale processor.

Features and benefits

  • Cutting consistency: A primary rotor cuts the initial pieces of crop from the bale before delivering it to the high-speed rotor knives. The high-speed rotor chops the crop further before sending it back through the primary rotor and ejecting it from the machine. These multiple touch-points provide consistency of cut size throughout the entire bale.
  • Versatility: The Final Cut FPX9000 is ready for windrow and bunk feeding, or processing material into a bunker and other storage items for mixing rations later. An optional powered side wall allows you to process round or square bales.
  • Speed: Bales are consistently fed into the primary rotor, reducing the need to reverse rotation. This slat and chain bale rotation design allows for easy maintenance without the need to remove the entire rotation bed and reduces the need to replace bushings and buildup.
  • Lessen the chance of unprocessed crop being fed through the machine with durable intermeshing flails on the primary rotor and high-speed rotor. These components produce a better consistency of processed material and reduce twine and net buildup.
  • Powerful and even distribution of material out the right-hand side of the machine is achieved with the dual direct drive gearbox. The benefit of this design delivers greater durability and requires less maintenance.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Length 15.8 ft 4.8 m
Height 8.8 ft 2.7 m
Width - Transport 8.4 ft 2.6 m
Width - Operation 12 ft 3.7 m
Weight 6340 lbs 2875.8 kg
Drawbar Weight 1940 lbs 880 kg
Horsepower Required 110 hp 82 kw
Horsepower maximum 210 hp 156.6 kw
PTO speed 1000 rpm
Hydraulics type 3 - double acting
Hydraulic Pressure 2000 psi 137.9 bar
Hydraulic flow rate 10 gpm 37.9 L/min
Minimum Tractor Size 6227 lbs 2824.5 kg
Axle adjustment 12" each axle
Bale rotation 3 roller chains with bolt-on cross slat
Bale size capacity Two bales, 6' x 5' (1.8 x 1.5 m)
Bale weight capacity 2500 lbs 1134 kg
Cut Control Bar Adjustment Hand lever with 5 settings
Cut Control Bar Quantity 7
Discharge Direction Right hand
Flail description Dual 1/4" blade x 5 1/2"
Flail Drum Diameter 26.8 in 68.1 cm
Flail Drum Length 78 in 198.1 cm
Flail Drum Speed 1500 rpm
Flail Drum Quantity 60
Horizontal spread distance 40 ft 12.2 m
Tire Size - Standard 14L x 16.1FL
Torque Protection - Driveline Shear bolt
High speed rotor flail description 3.6" x 6 11/32" reversible knives
High speed rotor flail quantity 60
High speed rotor diameter 22.2 in 56.4 cm
High speed rotor length 75.2 in 191 cm
High speed rotor speed 3000 rpm
Hitch Jack 5000 lbs 2268 kg
Safety chain kit 10000 lbs 4535.9 kg

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. © 2018 Vermeer Corporation All Rights Reserved.

Videos

Final Cut FPX9000 Bale Processor

Watch it work!

Images

Final Cut FPX9000 Bale Processor

Now through October 31st, 2018, qualified buyers can receive 0% interest for up to 48 months, 1.9% up to 60 months or cash back on the purchase of select new Vermeer forage equipment, including BPX9010 bale processors, VR1428/VR2040 wheel rakes and 605N balers among other models through Vermeer Credit Corporation (U.S.) or De Lage Financial Services, Canada Inc. (Canada).
This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.