BPX9010 Bale Processor

Meet the new BPX9010 bale processor. This workhorse combines simplicity, durability and versatility — an all-around processor ready to perform a variety of applications. Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m). The BPX9010 bale processor simplifies the process of processing bales.

Features and benefits

  • The power of the BPX9010 bale processor is distributed through two gearboxes. The design allows operators to expect less maintenance and help increase durability and efficiency when compared to chain or belt driven processors.
  • The BPX9010 bale processor has the versatility to process square bales with the optional powered sidewall kit and optional straight fork kit.
  • The slat and chain bale rotation design feeds the bale consistently into the rotor – reducing the need for reverse rotation.
  • The new toolless cut control bar design allows dual adjustments for increased aggression easily accessible from outside the machine. Ten different settings allow producers to be in control of processing speed and material size.
  • The rotor cleaner attachment on the cut control bar can be set to the self-cleaning position to help reduce excessive net and twine on the rotor, or set to the manual clean position to help minimize the amount of net or twine mixed in the feed.
  • A vertical bale lift system makes it more efficient to load bales and reduce stress on the machine. Plus, the robust T-style tongue frame has no welds or gussets at high stress points and is bolted high on the tub.
  • An offset rotor pulls material through for more consistent feeding and helps prevent uncontrolled fall-through from slowing down the machine. Process whole bales of varying shapes (with a powered sidewall kit) and qualities to produce uniform windrows, hit tight spots along the bunk line or spread evenly up to 50 ft (15.2 m) for bedding.
  • The BPX9010 bale processor features a redesigned tub profile to help maximize productivity and reduce the chance of plugging.
Length 15.6 ft 4.8 m
Height 8.5 ft 2.6 m
Width - Transport 8.2 ft 2.5 m
Width - Operation 11.2 ft 3.4 m
Weight 1480 lbs 671.3 kg
Drawbar Weight 1460 lbs 662.2 kg
Horsepower Required 85 hp 63.4 kw
Horsepower maximum 210 hp 156.6 kw
PTO speed 1000 rpm
Hydraulics type 3-Double-Acting
Hydraulic Pressure 2000 psi 137.9 bar
Hydraulic flow rate 8 gpm 30.3 L/min
Axle adjustment 12" (30.5 cm) each axle
Bale rotation 3 roller chains with bolt-on cross slat
Bale size capacity Two bales, 6' x 5' (1.8 m x 15 m)
Bale weight capacity 2500 lbs 1134 kg
Cut Control Bar Adjustment Hand lever with 5 settings
Cut Control Bar Quantity 7
Discharge Direction Right hand
Flail description 7/16" x 5-9/16" tempered spring
Flail Drum Diameter 26.8 in 68.1 cm
Flail Drum Length 78 in 198.1 cm
Flail Drum Speed 1000 rpm
Flail Quantity 30
Horizontal spread distance 50 ft 15.2 m
Tire Size - Standard 14L x 16.1FL
Torque Protection - Driveline Shear bolt
Hitch Jack 5000 lbs 2268 kg
Safety chain kit 10000 lbs 4535.9 kg
Extra Cut Control Bars Kit Yes
Flotation Tires 16.5L-16.1SL 6 SOFTRAC II
Hydraulic Cut Control Bar Kit Yes
Square bale kit Yes
Two hydraulic remote kit Yes
Automatic bale feed system kit N/A

Equipment Specification Disclaimer

Vermeer Corporation reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional or global-region specific features, accessories or components. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo, Equipped to Do More and Navigator are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries

Videos

BPX9010 Bale Processor | Vermeer Agriculture Equipment

Watch as the BPX9010 bale processor performs a variety of tasks around the farm from feeding to bedding.

Images

BPX9010 Bale Processor

Recent news

May 21, 2018
Today’s cattle producers need more from a bale processor —simplicity, durability and versatility. Vermeer took this list of needs and created the next step in their processor evolution with the new BPX9010 bale processor.

This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.