T955 Terrain Leveler SEM

The T955 COMMANDER® 3 Terrain Leveler surface excavation machine has a turbocharged ATAAC Caterpillar C9 ACERT Tier 3 electronic engine that provides all the torque you need to excavate level terrain.

Features and benefits

  • Use the trenching machine more effectively with less wear due to its low-speed, high torque, splined headshaft motor.
  • Decrease trencher teeth inspection and replacement maintenance time through an optional remote attachment control that can start or stop the engine, raise or lower the trencher boom and rotate chain at a slow speed.
  • Promote high-volume spoil removal with an extra-wide 30” (76.2 cm) dirt conveyor opening that helps reduce jamming.
  • Vermeer Vantage Track Extended Care Service Program offers an optional 3-year/3,000-hour or 5-year/5,000-hour heavy equipment warranty on the components of the closed loop hydrostatic system.
  • Vermeer dealers offer comprehensive service and genuine Vermeer replacement parts.
Approach Angle 16 deg
Height Range 133" (337.8 cm)
Length with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom 32.2 ' 9.8 m
Length with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom 34.7 ' 10.6 m
Length with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom 37.2 ' 11.3 m
Length with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom 39.7 ' 12.1 m
Weight Range 78,000 lb - 109,000 lb (35,380.2 kg - 49,441.6 kg)
Width Ranges 114" (289.6 cm)
Make and Model Caterpillar C13 ACERT Tier 3
Gross Horsepower 415 hp 309.5 kw
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 184 gal 696.5 L
Operating Range 8.8 hours
Fuel Consumption at Full Load 20.9 gph 79.1 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type exhaust aspirated
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Make and Model Caterpillar C13 ACERT Tier 4 Final
Gross Horsepower 415 hp 309.5 kw
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 184 gal 696.5 L
Operating Range 8.6 hours
Fuel Consumption at Full Load 21.3 gph 80.6 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Auto Self Level No
Ground Pressure Minimum 11.7 psi 80.7 kPa
Ground Pressure Maximum 13.3 psi 91.7 kPa
Tilt Track Available No
Tilt Track Max Angle 0
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 161 " 408.9 cm
Track Pad Type Single, double or triple grouser
Track Pad Width Ranges 24" (61 cm)
Track Size D6
Maximum Ground Speed - Low 68 ft/min 20.7 m/min
Maximum Ground Speed - High 136 ft/min 41.5 m/min
Parking and Emergency Brake spring-applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
Belt Width 30 " 76.2 cm
Conveyor Belt Speed Range 0-1070 fpm (0-326 m/min)
Conveyor Belt Style Cleat or finger type
Conveyor Length 108" or 168" (274.3 cm or 426.7 cm)
Conveyor Shift Available Yes
Conveyor Shift Distance Range 5" or 65" (12.7 cm or 165.1 cm)
Conveyor Style Curved
Discharge Direction Right or left
Discharge Height Range 62" - 76" (157 cm - 193 cm)
Trencher Yes
Terrain Leveler Yes
Rockwheel No
Bucket Wheel No
Cab Yes
Control System TEC Plus with SmartTEC
Air Conditioner/Heater Yes
Air Suspension Seat No
AM/FM Stereo with Weather Band Yes
Elevating Yes
Pressurized/Filtered Air Yes
Roll Over Module (ROM) Yes
Oil Tank Capacity 152 gal 575.4 L
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting 2500 psi 172.4 bar
Pump Flow at Maximum RPM 27.9 gpm 105.6 L/min
Pump Type pressure-and-flow-compensated (load-sensing)

Cut clean trenches.

Boom Depth Options 6 ', 8 ', 10 ', or 12 ' (1.8 m, 2.4 m, 3 m, or 3.7 m)
Sectionalized Boom Standard
Boom Top Rollers Optional
Minimum Chain Speed 316 ft/min 96.3 m/min
Maximum Chain Speed 643 ft/min 196 m/min
Cutting Width 18 ", 24 ", 26 ", 30 ", 36 ", or 42 " (45.7 cm, 61 cm, 66 cm, 76.2 cm, 91.4 cm, or 106.7 cm)
Digging Chain Size 4501 or 4502
Idler Diameter 40" (101.6 cm)
Trencher Drive Type Hydrostatic, two pumps and one motor
Maximum Digging Depth 144 " 365.8 cm
Maximum Cutting Width 42 " 106.7 cm

Images

T955 Commander 3

Trencher attachment

VIDEOS

Vermeer Surface Mining

See what Vermeer surface mining equipment can do for you.
January 20, 2014
See what Vermeer surface mining equipment can do for you.

Find my Vermeer dealer