There is no substitute for downhole power, so try the Vermeer D100x140 S3 drill.

Find A Dealer Request More Info

With a maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm, the D100x140 S3 Navigator® horizontal directional drill offers an exceptional one-two punch in response to your most challenging projects. To get you there and back, select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm) Firestick® drill rod. Consider the 15 ft (4.6 m) to minimize your footprint, while selecting 20 ft (6.1 m) will offer increased onboard rod carrying capacity.

There is no substitute for downhole power, so try the Vermeer D100x140 S3 drill.

With a maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm, the D100x140 S3 Navigator® horizontal directional drill offers an exceptional one-two punch in response to your most challenging projects. To get you there and back, select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm) Firestick® drill rod. Consider the 15 ft (4.6 m) to minimize your footprint, while selecting 20 ft (6.1 m) will offer increased onboard rod carrying capacity.

Find A Dealer Request More Info

Features & Benefits

Firestick drill rod

Experience the difference that has made one-piece, forged Firestick® drill rod the industry benchmark.

Stackable rod box

With consideration to ease of use and safety, the D100x140 S3 stackable rod box design allows additional rod to be loaded via the upper rod box. When matched with the optional onboard crane, no additional support equipment is required to load additional rod.

Wireless remote-controlled knuckle boom crane

The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).

Dual displays

State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.

Angled, true open-top vises

Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.

Increase your range

Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.

Specifications

Compare Models
Show Metric
  • General Dimensions and Weights

    • Length (Minimum Transport) - 15 ft (4.6 m) 376.8 in 957.1 cm
    • Length (Minimum Transport) - 20 ft (6.1 m) 436.8 in 1109.5 cm
    • Width (Minimum Transport) 102 in 259.1 cm
    • Width (With Cab, Minimum Transport) 102 in 259.1 cm
    • Height (Minimum Transport) 138 in 350.5 cm
    • Height (With Cab) 138 in 350.5 cm
    • Weight - 15 ft (6.1 m) 50300 lbs 22815.7 kg
    • Weight - 20 ft (6.1 m) 52500 lbs 23813.6 kg
    • Weight (Cab Option) - 15 ft (4.6 m) 49800 lbs 22588.9 kg
    • Weight (Cab Option) - 20 ft (6.1 m) 57220 lbs 25954.6 kg
    • Angle of Approach 18 deg
  • Engine

  • Operational

  • Fluid Capacities

  • Drilling Fluid System Option One

  • Drilling Fluid System Option Two

  • Crane

  • Features

See it in action

Video 6
Image 6
Video 5
Image 5
Video 3
Image 1
Video 1
Image 2
Video 2
Video 4
Image 3
Image 4

Talk to a Vermeer Dealer Today

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you're looking for.

* Required field
*
*
*
*
*
*
*
*
*
I have read and agree to this notice of personal information processing. *
I am 18 years or older. *
I confirm I have read and agree to the Vermeer Privacy Policy and conditions of use. *
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from your machine

Purchase with confidence

Purchase with confidence

Vermeer Confidence Plus® asset protection program provides the ongoing service you need to assist in protecting the productivity and value of your equipment.

Learn more
24/7 HDD tooling purchasing

24/7 HDD tooling purchasing

BORESTORE® tooling warehouse is your complete source for HDD tooling and accessories.

Get tooling

Vermeer Corporation reserves the right to make changes in engineering, design and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. Equipment shown is for illustrative purposes only and may display optional accessories or components specific to their global region. Please contact your local Vermeer dealer for more information on machine specifications. Vermeer, the Vermeer logo and Equipped to Do More are trademarks of Vermeer Manufacturing Company in the U.S. and/or other countries. Copyright © 2023 Vermeer Corporation. All Rights Reserved.