Compare up to four Vermeer models side-by-side

To help determine which Vermeer machines are best for your operation, select up to four models below to see a side-by-side comparison of product specifications.

Connect with your Vermeer dealer to learn more about product availability, pricing and financing options. 

Find a dealer

D500x500
Length (Minimum Transport) 45 ft (13.7 m)
Width 8.5 ft (2.6 m)
Height (Minimum Transport) 11.5 ft (3.5 m)
Weight 82000 lbs (37194.6 kg)
Suspension Dual axle with air ride suspension
Front Base Anchor Length 20 ft (6.1 m)
Front Base Anchor Width 6 ft (1.8 m)
Front Base Anchor Height 24 in (61 cm)
Front Flat Anchor Length 9.5 ft (2.9 m)
Front Flat Anchor Width 5 ft (1.5 m)
Front Flat Anchor Height 8 in (20.3 cm)
Rear Base Anchor Length 16 ft (4.9 m)
Rear Base Anchor Width 7.8 ft (2.4 m)
Rear Base Anchor Height 8 in (20.3 cm)
Number of Rear Legs 2
Drill Rack Angle 8 degrees to 12 degrees
D500x500
Length 10 ft (3.1 m)
Width 8 ft (2.4 m)
Height 8 ft (2.4 m)
Weight 6000 lbs (2721.6 kg)
Heat and Air Conditioning In-wall combination unit
D500x500
Length 22.4 ft (6.8 m)
Width 8 ft (2.4 m)
Height 10.3 ft (3.1 m)
Weight 38000 lbs (17236.5 kg)
Make and Model (1) CAT C-27
Fuel Type Diesel
Fuel Capacity 500 gal (1892.7 L)
Hydraulic Tank Capacity 720 gal (2725.5 L)
Maximum Engine RPM 2000 rpm ( )
Gross Horsepower 800 hp (596.6 kw)
EPA Certification Family Tier 2 (EU Stage II)
D500x500
Length Not applicable
Width Not applicable
Height Not applicable
Weight Not applicable
Make and Model Not applicable
Fuel Type Not applicable
Fuel Capacity Not applicable
Hydraulic Tank Capacity Not applicable
Maximum Engine RPM Not applicable
Gross Horsepower Not applicable
EPA Certification Family Not applicable
D500x500
Length Not applicable
Width Not applicable
Height Not applicable
Weight Not applicable
Make and Model Not applicable
Fuel Type Not applicable
Fuel Capacity Not applicable
Hydraulic Tank Capacity Not applicable
Maximum Engine RPM Not applicable
Gross Horsepower Not applicable
EPA Certification Family Not applicable
D500x500
Thrust 500000 lbs (2224.1 kN)
Pullback 500000 lbs (2224.1 kN)
Maximum Spindle Torque 50000 ft-lb (67791 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM) 50000 ft-lb (67791 Nm)
Maximum Spindle Speed at Maximum Engine RPM (with PS800) 66 rpm ( )
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600) Not applicable
Maximum Carriage Speed at Maximum Engine RPM 64 ft/min (19.5 m/min)
Number of Rotation Motors 1
Number of Drive Motors 2
Mud Swivel 3 in (7.6 cm)
D500x500
Breakout Force 253000 ft-lb (343022.5 Nm)
Configuration 3-jaw clamp, 8 " (20.3 cm)
Weight 3800 lbs (1723.7 kg)
Travel 6 ft (1.8 m)
Inside Diameter 9.8 in (24.9 cm)
D500x500
Clamp Force 250000 ft-lb (338955 Nm)
Configuration 2-jaw clamp
Inside Diameter 10 in (25.4 cm)
D500x500
Remote Lockout Yes
Strike Alert Yes
This site uses cookies to ensure you get the best experience on our website. By continuing to use this site, you consent to the usage of cookies.