T1155 Trencher

The T1155 COMMANDER® 3 is the perfect trenching machine to penetrate rock. It’s the ideal combination of heavy-duty construction, 540 hp (402.7 kW) from the turbocharged Caterpillar C15 ACERT Tier 3 engine, and sophisticated electronics.

Features and benefits

  • Adjust to various trench depths with optional sectionalized bridge and trencher booms.
  • Keep your construction site running smooth with the exclusive Vermeer TEC® Plus electronic control system.
  • Decrease trencher teeth inspection and replacement maintenance time through an optional remote attachment control that can start or stop the engine, raise or lower the trencher boom and rotate chain at a slow speed.
  • Enhance productivity with an elevated cab providing a better view of the boom, trench and conveyor.
  • Vermeer Vantage Track Extended Care Service Program offers an optional 3-year/3,000-hour or 5-year/5,000-hour heavy equipment warranty on the components of the closed loop hydrostatic system.
  • Vermeer dealers offer comprehensive service and genuine Vermeer replacement parts.
Approach Angle 16 deg
Height Range 146" (370.8 cm)
Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom 37.3 ' 11.4 m
Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom 39.8 ' 12.1 m
Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom 42.3 ' 12.9 m
Length with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar) 43 ' 13.1 m
Length with 50" (127 cm) End Idler and 16 ft (4.88 m) Boom (with Restraint Bar) 45.3 ' 13.8 m
Weight Range 120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
Width Ranges 118"-120" (292.1 cm - 304.8 cm)
Make and Model Caterpillar C15 ACERT Tier 3
Gross Horsepower 540 hp 402.7 kw
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 270 gal 1022.1 L
Operating Range 9.4
Fuel Consumption at Full Load 28.9 gph 109.4 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Make and Model Caterpillar C15 ACERT Tier 4 Final
Gross Horsepower 540 hp 402.7 kw
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 270 gal 1022.1 L
Operating Range 9.6
Fuel Consumption at Full Load 28.1 gph 106.4 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Auto Self Level No
Ground Pressure Minimum 13 psi 89.6 kPa
Ground Pressure Maximum 17.3 psi 119.3 kPa
Tilt Track Available No
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 177.5 " 450.9 cm
Track Pad Type Single, double or triple grouser
Track Pad Width Ranges 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm)
Track Size CAT 350 Excavator
Maximum Ground Speed - Low 50 ft/min 15.2 m/min
Maximum Ground Speed - High 133 ft/min 40.5 m/min
Parking and Emergency Brake spring-applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
Belt Width 30 " 76.2 cm
Conveyor Belt Speed Range 0-1070 fpm
Conveyor Belt Style Cleated or finger type
Conveyor Length 168" or 228" (426.7 or 579.1 cm)
Conveyor Shift Available Yes
Conveyor Shift Distance Range 65" and 125" (165.1 cm and 317.5 cm)
Conveyor Style Curved
Discharge Direction Right or left
Discharge Height Range 72" or 86" (182.9 cm or 218.4 cm)
Trencher Yes
Terrain Leveler Yes
Rockwheel No
Bucket Wheel No
Cab Yes
Control System TEC Plus with SmartTEC
Air Conditioner/Heater Yes
Air Suspension Seat Yes
AM/FM Stereo with Weather Band Yes
Elevating Yes
Pressurized/Filtered Air Yes
Roll Over Module (ROM) Yes
Oil Tank Capacity 152 gal 575.4 L
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting 2500 psi 172.4 bar
Pump Flow at Maximum RPM 27.9 gpm 105.6 L/min
Pump Type pressure-and-flow-compensated (load-sensing)

Cut clean trenches.

Boom Depth Options 8 ', 10 ', 12 ', 14 ', or 16 ' (2.4 m, 3 m, 3.7 m, 4.3 m, or 4.9 m)
Sectionalized Boom Yes
Boom Top Rollers Optional
Minimum Chain Speed 306 ft/min 93.3 m/min
Maximum Chain Speed 492 ft/min 150 m/min
Cutting Width 28 ", 30 ", 32 ", 36 ", or 42 " (71.1 cm, 76.2 cm, 81.3 cm, 91.4 cm, or 106.7 cm)
Digging Chain Size 5501 or CAT 235D double
Idler Diameter 50 " (127 cm)
Trencher Drive Type Hydrostatic, three pumps and one motor
Maximum Digging Depth 192 " 487.7 cm
Maximum Cutting Width 42 " 106.7 cm

Images

T1155 Commander 3

Trencher attachment

VIDEOS

T1155 Commander 3 Video

Trencher attachment
February 13, 2010
Trencher attachment

Find my Vermeer dealer