T1055 Trencher

For pipeline projects requiring high horsepower and deep digging depths, Vermeer offers the T1055 COMMANDER® 3. This trencher houses a powerful Caterpillar C13 ACERT Tier 3 electronic engine with 415 hp (301 kW) and equipped with the TEC Plus electronic control system.

Features and benefits

  • Perform rock excavation effectively with minimal chain wear due to its low-speed, high-torque, splined headshaft motor.
  • Adjust to trench depths using an optional sectionalized trencher boom.
  • Vermeer Vantage Track Extended Care Service Program offers an optional 3-year/3,000-hour or 5-year/5,000-hour heavy equipment warranty on the components of the closed loop hydrostatic system.
  • Vermeer dealers offer comprehensive service and genuine Vermeer replacement parts.
Approach Angle 16 deg
Height Range 135" (342.9 cm)
Length with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom 32.2 ' 9.8 m
Length with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom 34.7 ' 10.6 m
Length with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom 37.2 ' 11.3 m
Length with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom 39.7 ' 12.1 m
Length with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar) 41 ' 12.5 m
Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom 35.8 ' 10.9 m
Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom 38.3 ' 11.7 m
Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom 40.8 ' 12.4 m
Weight Range 87,000 lb - 124,000 lb (39,463.5 kg - 56,245.5 kg)
Width Ranges 116"-122" (294.6 cm - 309.9 cm)
Make and Model Caterpillar C13 ACERT Tier 3
Gross Horsepower 415 hp 309.5 kw
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 184 gal 696.5 L
Operating Range 8.8 hours
Fuel Consumption at Full Load 20.9 gph 79.1 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type exhaust aspirated
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Make and Model Caterpillar C13 ACERT Tier 4 Final
Gross Horsepower 415 hp 309.5 kw
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 184 gal 696.5 L
Operating Range 8.6 hours
Fuel Consumption at Full Load 21.3 gph 80.6 lph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Auto Self Level No
Ground Pressure Minimum 9.4 psi 64.8 kPa
Ground Pressure Maximum 13.9 psi 95.8 kPa
Tilt Track Available No
Tilt Track Max Angle 0
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 176 " 447 cm
Track Pad Type Single or double grouser
Track Pad Width Ranges 24" (61 cm) or 30" (76.2 cm)
Track Size D7G
Maximum Ground Speed - Low 57.1 ft/min 17.4 m/min
Maximum Ground Speed - High 114 ft/min 34.7 m/min
Parking and Emergency Brake spring-applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
Belt Width 30 " 76.2 cm
Conveyor Belt Speed Range 0-1070 fpm (0-326 m/min)
Conveyor Belt Style Cleat or finger type
Conveyor Length 108" or 168" (274.3 cm or 426.7 cm)
Conveyor Shift Available Yes
Conveyor Shift Distance Range 5" and 65" (12.7 and 165.1 cm)
Conveyor Style Curved
Discharge Direction Right or left
Discharge Height Range 64"-78" (162.6 cm - 198.1 cm)
Trencher Yes
Terrain Leveler Yes
Rockwheel No
Bucket Wheel No
Cab Yes
Control System TEC Plus with SmartTEC
Air Conditioner/Heater Yes
Air Suspension Seat No
AM/FM Stereo with Weather Band Yes
Elevating Yes
Pressurized/Filtered Air Yes
Roll Over Module (ROM) Yes
Oil Tank Capacity 152 gal 575.4 L
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting 2500 psi 172.4 bar
Pump Flow at Maximum RPM 27.9 gpm 105.6 L/min
Pump Type pressure-and-flow-compensated (load-sensing)

Cut clean trenches.

Boom Depth Options 6 ', 8 ', 10 ', 12 ', or 14 ' (1.8 m, 2.4 m, 3 m, 3.7 m, or 4.3 m)
Sectionalized Boom Standard
Boom Top Rollers Optional
Minimum Chain Speed 316 ft/min 96.3 m/min
Maximum Chain Speed 714 ft/min 217.6 m/min
Cutting Width 28 ", 30 ", 32 ", 36 ", or 42 " (71.1 cm, 76.2 cm, 81.3 cm, 91.4 cm, or 106.7 cm)
Digging Chain Size D6, 5501, or 4501
Idler Diameter 40 " or 50 " (101.6 cm or 127 cm)
Trencher Drive Type Hydrostatic, two pumps and one motor
Maximum Digging Depth 168 " 426.7 cm
Maximum Cutting Width 42 " 106.7 cm

Images

T1055 Commander 3

Trencher attachment

VIDEOS

Vermeer Surface Mining

See what Vermeer surface mining equipment can do for you.
January 20, 2014
See what Vermeer surface mining equipment can do for you.

Find my Vermeer dealer