D100x120 Series II NAVIGATOR® Horizontal Directional Drill

Power through a wide range of bores, even in difficult ground conditions, with the D100x120 Series II. Equipped with a 225 hp/150 kW John Deere 6068 Tier 3 diesel engine, the D100x120 Series II offers 12,000 ft-lb./16,270 Nm of rotational torque and 100,000 lbs/445 kN of thrust/pullback force.

Features and benefits

  • Improves productivity through a climate-controlled cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
  • Reduces maintenance time with a self-cleaning rack-and-pinion carriage drive and bolt-on gear rack sections.
  • Change rod boxes easier when you add the optional remote-controlled crane that eliminates the need for an excavator or backhoe and delivers a lift capacity of 7,530 lbs/3,416 kg and maximum reach of over 20 feet/6 m.
  • Helps prevent rod wrap or wind-up because its floating vice allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
  • Superior Firestick drill stem constructed of Vermeer-specified high carbon alloy steel features one-piece, forged rods that have been heat-treated for uniform strength and consistent quality.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
Length (Minimum Transport) 410 " 1041.4 cm
Width (With Cab, Minimum Transport) 93 " 236.2 cm
Height (Minimum Transport) 118 " 299.7 cm
Weight 43500 lbs 19731.3 kg
Make and Model John Deere PowerTech PE6068HF275
Fuel Type Diesel
Maximum Engine RPM 2400 rpm
Gross Horsepower 225 hp 167.8 kw
Aspiration Turbocharged
Max Fuel Consumption 13.7 gph 51.9 lph
Maximum Operating Angle (Fore/Aft)* 25 continuous
Maximum Operating Angle (Left/Right)* 25 continuous
Maximum Carriage Speed at Maximum Engine RPM 175 ft/min 53.3 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM) 12000 ft-lb 16269.8 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM) 9000 ft-lb 12202.4 Nm
Maximum Spindle Torque (High at Maximum Engine RPM) 6000 ft-lb 8134.9 Nm
Maximum Spindle Speed at Max Engine RPM 120 rpm
Minimum Bore Diameter 5 " 12.7 cm
Maximum Ground Drive Speed at Maximum Engine RPM 3.2 mph 5.2 km/h
Automated Rod Loader Yes, semi-automated
Noise Level at Operator's Ear 92
Drill Rack Angle 33 deg
Fuel Tank 75 gal 283.9 L
Hydraulic Tank 85 gal 321.8 L
Hydraulic System 115 gal 435.3 L
Maximum Flow 150 gpm 567.8 L/min
Maximum Pressure 1100 psi 75.8 bar
Maximum Flow 200 gpm 757.1 L/min
Maximum Pressure 1100 psi 75.8 bar
Maximum Flow 200 gpm 757.1 L/min
Maximum Pressure 1100 psi 75.8 bar
Brand Aplex
On Board Tank Capacity 200 gal 757.1 L
Brand Kerr
Maximum Pressure 1100 psi 75.8 bar
Maximum Lifting Capacity 7530 lbs 3415.6 kg
Maximum Lifting Capacity - Boom Extended/Max Reach 2350 lbs 1065.9 kg
Rotation 200 deg
Maximum Reach 246 " 624.8 cm
Optional Crane Yes
Wireless Remote Yes
Breakout System Yes- hydraulic open-top
Drilling Lights Standard
Flow Indicator Yes
Stakedown System Optional
Cab Standard
Strike Alert Yes

Images

D100x120 Series II NAVIGATOR® Horizontal Directional Drill

VIDEOS

Safe Operation of Directional Boring Tracking Equipment

For all directional drilling tracking equipment.
September 21, 2011
For all directional drilling tracking equipment.

March 12, 2009
The number of HDD installations has increased significantly -- but challenges loom

Find my Vermeer dealer