HG6000TX Horizontal Grinder
Maximize your grinder power. The HG6000TX self-propelled track grinder is highly maneuverable and able to work at uneven job sites and land-clearing projects. For increased efficiency, the HG6000TX can also drive between material piles. It features the innovative duplex drum, remote-controlled operation, an exclusive feed system and many other productivity-enhancing features.
| General | ||
| Weight | 67000 lbs | 30390.7 kg |
| Transportation Length | 41 ' | 12.5 m |
| Width | 100" with 20" pads, 106" with 24" pads | 254cm with 50.8cm pads, 269cm with 61cm pads |
| Height | 138 " | 350.5 cm |
| Engine | ||
| Model | CAT C16 ATAAC 630HP Teir II | Turbo Charged, Air to Air Charge Cooled |
| Gross HP at Full RPM | 630HP @ 2100 RPM | 470kw |
| Infeed System | ||
| Feed Table Width | 60 " | 152.4 cm |
| Feed Roller Diameter | 36 " | 91.4 cm |
| Feed Table Length (Option 2) | 14 ' | 4.3 m |
| Feed Throat Height | 32 " | 81.3 cm |
| Feed Roller Down Pressure | Hydraulically Adjustable | Remote and Control Panel Control |
| Feed Table Type | Chain and Slat | |
| Discharge | ||
| Discharge Height | 11 ' | 3.4 m |
| Hammermill | ||
| Rotor Tip Diameter | 36.4 " | 92.5 cm |
| Rotor Cutting Length | 61 " | 154.9 cm |
| Drive Line | ||
| Clutch | HPTO Wet Clutch | |
| Controls | ||
| Stationary | Side Mounted Manual Controls | Engine and Feed Systems |
| Remote | Wireless Radio Remote | Engine, Feed Systems, TOD, Tracks |
| Undercarriage | ||
| Length | 142" Centerline to Centerline | 360.7cm |
| Track Pad Qty. | 52 | |
| Track Pad Width | 20", 24" | 51cm, 61cm |
